Best PTFE Tubing for Bowden 3D Printer (2026): 5 Picks Compared
5 PTFE Bowden tubes for 1.75mm filament compared by length, inner diameter, fittings, cutter and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallXirbbo 1M Kit9.7/10View on Amazon - 2
Best Original CapricornSovol Capricorn XS 1M9.7/10View on Amazon - 3
Best Multi-PackSIQUK 4 Pcs Kit9.6/10View on Amazon - 4
Best Long TubeAMX3d 2.0M Tube9.6/10View on Amazon
A print that starts clean and then under-extrudes halfway up, a filament path that drags and squeaks on every retraction, a tube that has gone cloudy and loose at the hotend: most Bowden troubles trace back to a tired length of tubing. A best ptfe tubing for bowden 3d printer swap puts a fresh tube between the extruder and the hotend, so the filament feeds straight and the print finishes the way it started.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Xirbbo 1M Kit: 1 meter of Capricorn tubing with 4 fittings, a cutter, 4 nozzles and a stated 365 day warranty. Check price on Amazon
- Best Original Capricorn Sovol Capricorn XS 1M: Original Capricorn XS Series tubing in a 1 meter kit with 4 fittings and a cutter. Check price on Amazon
- Best Multi-Pack SIQUK 4 Pcs Kit: 4 tubes of 1 meter each with 8 PC4-M6 and 8 PC4-M10 fittings, rated up to 260C. Check price on Amazon
- Best Long Tube AMX3d 2.0M Tube: A 2.0 meter tube with a 2.0mm inner diameter and a 4.0mm outer diameter, rated up to 260C. Check price on Amazon
Machines on the list

1m PTFE Teflon Tube Capricorn Bowden Tubing
A 1 meter Capricorn Bowden tubing kit with 2 PC4-M6 and 2 PC4-M10 fittings, a tube cutter, 4 nozzles, a spanner and 4 snaps, plus a stated 365 day warranty.
Pros
- 4 fittings, a cutter, 4 nozzles, a spanner and 4 snaps included
- Stated 365 day warranty
- Fits Ender 3 V2, Ender 3 Pro, Ender 5, CR-10 and CR-10S
- Cutter trims the tube flat on both sides
Cons
- Brand is Xirbbo, but the listing borrows Capricorn wording
- No inner diameter stated for the tube
- No temperature figure stated

Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM
Original Capricorn XS Series PTFE tubing in a 1 meter kit with 2 PC4-M6 and 2 PC4-M10 fittings and a tube cutter for Ender 3 and CR-10 printers.
Pros
- 100% Original Capricorn XS Series tubing
- Tight tolerances guide filament straight to the hotend
- Rated for high temperatures for ABS, Nylon and Polycarbonate
- 4 fittings and a cutter included
Cons
- No temperature figure stated
- No inner diameter stated for the tube
- No warranty term stated
- No safety listing stated

SIQUK 4 Pcs Teflon Tube PTFE Tubing(1 Meter)
4 tubes of 1 meter each with 8 PC4-M6 and 8 PC4-M10 fittings, a 2mm inner diameter and a 4mm outer diameter, rated up to 260C for 1.75mm filament.
Pros
- 4 tubes with 8 PC4-M6 and 8 PC4-M10 fittings
- 2mm inner diameter and 4mm outer diameter stated
- Rated up to 260C
- White and blue tube options
Cons
- No cutter stated
- Spec table lists only blue while the bullets offer white and blue
- No warranty term stated
- Listing warns to keep small accessories away from children

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament
A 2.0 meter white PTFE Bowden tube with a 2.0mm inner diameter and a 4.0mm outer diameter, rated up to 260C for 1.75mm filament.
Pros
- 2.0 meter length covers longer Bowden runs
- 2.0mm inner diameter and 4.0mm outer diameter stated
- Rated up to 260C
- Low-friction PTFE for smooth filament feed
Cons
- No fittings included
- No cutter included
- No warranty term stated
- No safety listing stated

PTFE Teflon tubing 25ft
A 25 ft PTFE tube with a 3mm inner diameter for 1.75mm filament, with a UL flame rating and FDA food-contact requirements stated.
Pros
- 25 ft length, the longest tube here
- 3mm ID by 4mm OD, listed for 1.75mm filament Bowden printers
- UL-224 VW-1 flame rating stated
- Raw materials meet FDA requirements per FDA 21 CFR 177.1550
Cons
- No warranty term is stated
- 3mm ID is a looser fit for 1.75mm filament than the Creality 1.9mm ID
- No friction coefficient figure is stated
- Length is fixed at 25 ft, with no shorter length listed
Other machines to compare
Quickun PTFE Teflon Tubing TubeCheck price on Amazon
PTFE Teflon tubing 5ftCheck price on Amazon
PTFE Teflon tubing 10ft- 2mm ID X 4mm OD for 1.75 FilamentCheck price on Amazon
PTFE Teflon tubing 10ftCheck price on Amazon
Feelers PTFE Teflon TubingCheck price on Amazon
Specs compared
| Model | HQ Score | Length | Inner diameter | Fittings | Cutter | Rated temperature | Warranty |
|---|---|---|---|---|---|---|---|
| Xirbbo 1M Kit | 9.7/10 | 1 meter | Not stated | 4 (2 PC4-M6, 2 PC4-M10) | Yes | Not stated | 365 day |
| Sovol Capricorn XS 1M | 9.7/10 | 1 meter | Not stated | 4 (2 PC4-M6, 2 PC4-M10) | Yes | Not stated | Not stated |
| SIQUK 4 Pcs Kit | 9.6/10 | 4 x 1 meter | 2mm | 8 PC4-M6, 8 PC4-M10 | No | Up to 260C | Not stated |
| AMX3d 2.0M Tube | 9.6/10 | 2.0 meters | 2.0mm | None | No | Up to 260C | Not stated |
| Allen Tech 25ft Tube | 9.6/10 | 25 ft | 3mm | None | No | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. Where a listing contradicts itself, both figures are shown.
What the listings tell you, and what they leave out
We read 5 PTFE tubing listings. Only 2 of the 5 state a temperature figure, and both rate their tubing up to 260C. Only 1 of the 5 states a warranty term, the Xirbbo 365 day warranty. 2 kits include a tube cutter, and 2 of the 5 list no fittings at all.
Lengths run from 1 meter to 25 ft, and inner diameters from 2.0mm to 3mm. The Sovol and Xirbbo listings give no inner diameter and no temperature figure, so both stay unstated here.
What to look for in a best ptfe tubing for bowden 3d printer
Length and inner diameter
Match the tube to the printer: a 1 meter kit suits a single swap, while a 2.0 meter tube covers a longer Bowden run and a 25 ft tube stocks several swaps. Inner diameter matters more than length: the AMX3d and SIQUK tubes state a 2.0mm or 2mm inner diameter for 1.75mm filament, while the Allen Tech tube states a 3mm inner diameter.
Fittings and cutter
The Sovol and Xirbbo kits include 2 PC4-M6 and 2 PC4-M10 fittings plus a cutter, with the extruder fittings PC4-M6 and the hotend fittings PC4-M10. The SIQUK kit includes 8 PC4-M6 and 8 PC4-M10 fittings but no cutter. The AMX3d and Allen Tech listings are tube only, so a cutter and fittings already in the drawer stay in play.
Temperature figure
Only the AMX3d and SIQUK listings state a temperature figure, both up to 260C. The Sovol and Xirbbo listings call their tubing high-temperature rated but give no figure, so a hot print calls for a listing that states its limit.
Original Capricorn or plain PTFE
The Sovol listing states 100% Original Capricorn XS Series tubing. The Xirbbo listing uses the same Capricorn wording for a Xirbbo-branded kit, so read the brand line before ordering. The AMX3d, SIQUK and Allen Tech listings state plain PTFE tubing with no Capricorn claim.
Stay inside the stated temperature: the AMX3d and SIQUK listings rate their tubing up to 260C, and the Sovol and Xirbbo listings give no temperature figure. Keep small accessories away from children, as the SIQUK listing warns, and vent the print area while printing.
Project Match
- ABS, Nylon and Polycarbonate: the Sovol and Xirbbo listings name those filaments for their Capricorn tubing.
- PLA and ABS on a 1.75mm printer: the SIQUK listing states compatibility with all 1.75mm PLA ABS 3D printers.
- A worn tube on an Ender 3 V2, Ender 3, Ender 3 Pro, Ender 5, CR-10 or CR-10S: the Sovol kit lists those models.
- A long run of replacements: the Allen Tech tube measures 25 ft.
- A plain tube-only swap: the AMX3d tube comes as a 2.0 meter tube with no fittings.
How the scores add up
Each tube is scored on performance, build, value, safety and warranty. How we pick explains the weights. Only 1 of the 5 listings states a warranty term, and none states a safety listing, so all score zero on safety.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Xirbbo 1M Kit | 9.7 | 30 | 20 | 21 | n/a | 2 |
| Sovol Capricorn XS 1M | 9.7 | 32 | 22 | 21 | n/a | 0 |
| SIQUK 4 Pcs Kit | 9.6 | 30 | 20 | 22 | n/a | 0 |
| AMX3d 2.0M Tube | 9.6 | 29 | 21 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What size PTFE tubing fits a Bowden 3D printer?
For 1.75mm filament, look for a 2.0mm or 2mm inner diameter and a 4.0mm or 4mm outer diameter, as the AMX3d and SIQUK listings state. The Allen Tech tube states a wider 3mm inner diameter, so check the fit before ordering.
How long should PTFE Bowden tubing last?
Not stated. None of the 5 listings gives a service life, so replace the tube when prints show feeding trouble or the tube looks worn at the hotend.
Do I need new fittings with a new PTFE tube?
Not always: the Sovol, Xirbbo and SIQUK kits include PC4-M6 and PC4-M10 fittings, while the AMX3d and Allen Tech listings are tube only. Match the fitting thread to the extruder and hotend: the listings state PC4-M6 for the extruder and PC4-M10 for the hotend.
What is Capricorn PTFE tubing?
Capricorn is a brand of PTFE tubing the Sovol listing states as 100% Original Capricorn XS Series, with tight tolerances for the filament path. The Xirbbo listing uses the same wording for a Xirbbo-branded kit, so check the brand line on the listing.
Can PTFE tubing handle high-temperature filaments?
The Sovol and Xirbbo listings say their Capricorn tubing suits exotic filaments such as ABS, Nylon and Polycarbonate. Only the AMX3d and SIQUK listings state a temperature figure, both up to 260C, so a hotter filament calls for a listing that states its limit.
Related: our 3D printers hub, the 3D printer accessories, the best PTFE tubing 2mm ID roundup, the PTFE vs all metal hotend guide and the laser cutter vs 3D printer guide.




