Best Soldering Torch (2026): 5 Torches Compared
5 soldering torches compared by flame output, fuel type, ignition, safety features and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSuniqFyre Torch Head9.7/10View on Amazon - 2
Best Propane HeadRTTOOA Torch Head9.7/10View on Amazon - 3
Best Butane TorchSondiko Butane Torch9.6/10View on Amazon - 4
Best Compact ButaneTBTEEK Butane Torch9.6/10View on Amazon
A ring joint needs heat right at the joint, a copper pipe joint needs heat around the fitting, and a stained glass seam needs a steady flame that stays where you put it. The best soldering torch for the job depends on the fuel, the flame and the work in front of you. This guide compares the torches below on the numbers each maker publishes: flame output, fuel type, ignition, safety features and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SuniqFyre Torch Head: 10,000 BTU, CSA certified, 3-year warranty, 360-degree burn Check price on Amazon
- Best Propane Head RTTOOA Torch Head: 10,000 BTU, CSA certified, 3-year warranty, trigger start Check price on Amazon
- Best Butane Torch Sondiko Butane Torch: Flame to 2372°F, 20 to 50 minutes per refill, 1-year warranty Check price on Amazon
- Best Compact Butane TBTEEK Butane Torch: Flame to 2500°F, fuel gauge, 12-month warranty Check price on Amazon
Machines on the list

SuniqFyre Propane Torch Head, Upgraded 10,000 BTU
A propane torch head rated at 10,000 BTU with a built-in regulator, flame lock and CSA certification.
Pros
- 10,000 BTU output, upgraded from 8,000 BTU
- CSA certified with a built-in pressure regulator
- 360-degree all-angle burn with inverted burning for up to 30 minutes
- Pencil flame for detailed soldering, plus a flame lock for hands-free use
Cons
- Fuel cylinder is not included
- Copper pipe work is stated up to 3/4 in only
- Runs on propane, MAPP and MAP-PRO only, with no butane option
- No flame temperature is stated, only the 10,000 BTU output

RTTOOA Propane Torch Head
A propane torch head rated at 10,000 BTU with a built-in pressure regulator, trigger start and CSA certification.
Pros
- 10,000 BTU output, upgraded from 8,000 BTU
- CSA certified, with cast aluminum body and solid brass valves
- Built-in pressure regulator with trigger start and flame lock
- Solders copper pipes up to 3/4 in and works upside down for up to 30 minutes
Cons
- No flame temperature is stated, only the 10,000 BTU output
- No item weight is stated
- Copper pipe work is stated up to 3/4 in only
- Runs on propane, MAPP and MAP-PRO only, with no butane option

Sondiko Butane Torch, Refillable Soldering Torch
A refillable butane torch with a visible fuel window, safety lock and a flame rated to 2372°F.
Pros
- Flame rated to 1300°C/2372°F with an adjustable regulator
- 20 to 50 minutes of use per refill, per the maker
- Visible fuel gauge with a MAX line, plus a safety lock
- Fits all brands of small butane tanks, with a red adapter included
Cons
- Butane gas is not included
- No CSA certification is stated, unlike the propane torch heads
- 1-year warranty is shorter than the 3-year terms here
- Butane only, with no propane or MAPP option

TBTEEK Butane Torch Lighter with Fuel Gauge
A refillable butane torch with a fuel gauge, safety stopper and a flame rated to 2500°F.
Pros
- Flame rated to 1371°C/2500°F, the highest temperature stated here
- Fuel gauge shows the level and helps prevent overfilling
- Extended heat-resistant nozzle keeps the hand clear of the flame
- Nozzle adapters included, fitting any brand of small butane tanks
Cons
- Butane is not included
- No CSA certification is stated, unlike the propane torch heads
- 12-month warranty is shorter than the 3-year terms here
- Butane only, with no propane or MAPP option

Bernzomatic TS4000 Trigger Start Torch 361524
A trigger-start torch that fits a propane tank and works with MAPP gas.
Pros
- Trigger start with instant on and off ignition
- Fits a propane tank and works with MAPP gas
- 1.0 lb stated weight
- Made in America, from a commercial brand
Cons
- No BTU or flame temperature is stated
- No warranty term is stated
- No safety lock, flame lock or certification is stated
- No copper pipe size is stated, unlike the propane torch heads
Other machines to compare
Bernzomatic Trigger Start TorchCheck price on Amazon
Flame King FK4500CGA High Intensity Propane Torch Head forCheck price on Amazon
RAVS DUAL Flame Modes Butane TorchCheck price on Amazon
Smith Little Torch Soldering Welding & 5 TipsCheck price on Amazon
Specs compared
| Torch | HQ Score | Fuel | Flame output | Ignition | Safety | Warranty |
|---|---|---|---|---|---|---|
| SuniqFyre Torch Head | 9.7/10 | Propane, MAPP, MAP-PRO | 10,000 BTU | Trigger start | CSA certified | 3 years |
| RTTOOA Torch Head | 9.7/10 | Propane, MAPP, MAP-PRO | 10,000 BTU | Trigger start | CSA certified | 3 years |
| Sondiko Butane Torch | 9.6/10 | Butane | Up to 2372°F | Piezo ignition | Safety lock | 1 year |
| TBTEEK Butane Torch | 9.6/10 | Butane | Up to 2500°F | One-hand ignition | Safety stopper | 12 months |
| Bernzomatic TS4000 | 9.4/10 | Propane, MAPP | Not stated | Trigger start | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 19 November 2026. Flame output is the maker’s BTU or temperature figure; 2 of the 5 state a CSA certification.
What the listings tell you, and what they leave out
This guide covers 5 torch listings. 2 state a CSA certification, and 4 state a warranty term. The 2 butane torches state a flame temperature, while the 2 propane heads state a 10,000 BTU output instead. Only the Bernzomatic states no BTU rating, no flame temperature and no warranty term.
Treat every torch here as an open flame: work on a heat-proof surface, ventilate the area, and wear eye protection.
Buying guide: choosing the best soldering torch
Butane or propane
The Sondiko and TBTEEK torches run on refillable butane, with butane not included. The RTTOOA, SuniqFyre and Bernzomatic heads run on propane cylinders, and the RTTOOA and SuniqFyre heads also run on MAPP and MAP-PRO through a CGA600 connection. Butane torches suit jewelry and small work; propane heads suit copper pipe work.
Flame output: BTU or temperature
The RTTOOA and SuniqFyre heads are each rated at 10,000 BTU, up from 8,000 BTU. The Sondiko flame is rated to 1300°C/2372°F and the TBTEEK flame to 1371°C/2500°F. The Bernzomatic states no BTU rating and no flame temperature. A BTU figure and a temperature figure do not compare directly, so match the figure to the work: copper pipe work uses the BTU-rated heads, and jewelry work uses the temperature-rated butane torches.
Ignition and flame lock
The RTTOOA, SuniqFyre and Bernzomatic heads start with a trigger, and the Sondiko starts with piezo ignition. The TBTEEK starts with one-hand ignition. The RTTOOA and SuniqFyre heads lock the flame in place, and the Sondiko and TBTEEK torches hold a continuous flame for hands-free work. A lock matters when the flame must stay on while your hands hold the work.
What the flame is for
The RTTOOA and SuniqFyre heads solder copper pipes up to 3/4 in, and each names HVAC work. The Sondiko and TBTEEK torches name soldering jewelry and resin art. All 5 name cooking or searing use, from caramelizing desserts to searing meat. Match the torch to the work it names, not to the work you hope it covers.
Warranty and certification
The RTTOOA and SuniqFyre heads carry a 3-year warranty and a CSA certification. The Sondiko carries a 1-year manufacturer warranty, and the TBTEEK carries a 12-month warranty. The Bernzomatic states no warranty term. A written term and a certification tell you the most about what the maker stands behind.
Soldering torches burn fuel in the open. Work on a heat-proof surface, ventilate the area, and wear eye protection. Lead solder is not for food-contact items. See our best fume extractor for soldering for fume control.
Project Match
- Copper pipe soldering: RTTOOA and SuniqFyre, each rated for copper pipes up to 3/4 in.
- Jewelry soldering: Sondiko and TBTEEK, each named for soldering jewelry.
- Resin art: Sondiko and TBTEEK, each named for resin art work.
- Cooking and searing: all 5 torches name kitchen or searing use.
- Stained glass: Not stated; none of the 5 names stained glass work.
How the scores add up
Each torch is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SuniqFyre Torch Head | 9.7 | 32 | 22 | 21 | 8 | 4 |
| RTTOOA Torch Head | 9.7 | 30 | 22 | 21 | 8 | 4 |
| Sondiko Butane Torch | 9.6 | 29 | 20 | 21 | 7 | 3 |
| TBTEEK Butane Torch | 9.6 | 29 | 20 | 20 | 7 | 3 |
| Bernzomatic TS4000 | 9.4 | 27 | 20 | 19 | 0 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
Why use a torch for soldering instead of an iron?
A torch suits copper pipe joints and larger metal pieces; the RTTOOA and SuniqFyre heads are rated for copper pipes up to 3/4 in. A soldering iron suits small electronics joints. See our best soldering iron for beginners for iron picks.
Do I need a fume extractor for soldering?
Soldering fumes rise from the joint, so ventilation matters in a small room. A fume extractor pulls fumes away from the work area while you solder.
How hot does a soldering torch get?
The Sondiko flame is rated to 1300°C/2372°F and the TBTEEK flame to 1371°C/2500°F. The RTTOOA and SuniqFyre heads state a 10,000 BTU output instead of a temperature, and the Bernzomatic states neither figure.
Which fuel does a soldering torch use?
The Sondiko and TBTEEK torches run on refillable butane, with butane not included. The RTTOOA, SuniqFyre and Bernzomatic heads run on propane cylinders, and the RTTOOA and SuniqFyre heads also run on MAPP and MAP-PRO.
Can I use a soldering torch for jewelry?
Yes. The Sondiko and TBTEEK torches name soldering jewelry among their uses. Work on a heat-proof surface and ventilate the area.
Related: the soldering hub, best soldering iron for beginners, and the best fume extractor for soldering. Also see our best soldering iron for stained glass. Also see our best solder wire. Also see our best solder paste. Also see our soldering temperature. Also see our how to use a soldering tool. Also see our best soldering iron kit.




