Jewelry Torch vs Soldering Iron: Which One Should You Buy?
A jewelry torch and a soldering iron join metal in different ways, and the right choice follows the heat, tips and control each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Bernz-O-Matic ST2200T Micro Flame Butane Torch9.6/10View on Amazon - 2
Dremel VersaTip Precision Butane Torch9.6/10View on Amazon - 3
RAVS Butane Soldering Iron Kit9.6/10View on Amazon - 4
Mini Oxygen Torch Kit, Micro Oxygen9.5/10View on Amazon
A maker who wants to join small metal parts faces a choice between open flame and a heated tip. This guide compares jewelry torch vs soldering iron, using the listings in this comparison as concrete examples, so the choice follows the work rather than the marketing.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick a jewelry torch for open-flame jewelry repair at high heat, and pick a soldering iron for controlled soldering with accessories and temperature control. The TOAUTO torch lists the highest maximum temperature here, while the Dremel iron lists 7 accessories for 6 applications.
Machines on the list

Bernz-O-Matic ST2200T Micro Flame Butane Torch
A small butane torch with a precision needle point flame, push button ignition and a 3-year warranty.
Pros
- Precision needle point flame suits small jewelry joints
- Built-in push button igniter, no separate lighter needed
- Limited 3-year warranty, the only stated warranty here
- Manufactured in the United States
Cons
- Narrow flame suits small joints rather than broad work
- Only the included solder tip is in the box, with no spare tip
- Small size suits precision work, not larger brazing jobs
- The 3.0 x 6.5 x 9.5 inch body needs a clear spot on the bench

Dremel VersaTip Precision Butane Torch
A cordless butane iron with 7 accessories for 6 applications, variable temperature control and an ignition lock.
Pros
- 7 accessories cover 6 applications, from soldering to pyrography
- Variable temperature control adjusts the flame to the job
- Flame lock holds a continuous flame for steady work
- Integrated ignition with a lock guards against accidental ignition
Cons
- No warranty term is stated
- Butane gas is not included, so fuel is a separate purchase
- At 12.99 inches long it needs more bench space than the smaller torches
- 7 accessories to store and keep track of between jobs

RAVS Butane Soldering Iron Kit
A 14-piece butane kit with adjustable temperature control, piezo ignition and a travel case.
Pros
- 14-piece kit covers torch work, soldering and heat-shrink tubing
- Adjustable temperature control suits different tasks
- Piezo ignition with one-touch ignition for fast heating
- Travel case and leather case keep the kit organized
Cons
- No warranty term is stated
- Does not come with butane, so fuel is a separate purchase
- At 1.0 pounds it is the heaviest stated weight here
- The 6.5 x 1.8 x 6.0 inch torch plus case takes more bench space than a torch on its own

Mini Oxygen Torch Kit, Micro Oxygen
A mini oxygen torch reaching 1700°C, with 5 tips and a choice of gases for jewelry repair.
Pros
- Maximum temperature of 1700°C handles iron, gold, silver and copper
- 5 replacement tips in 1/8, 3/8, 5/8, 3/4 and 7/8 mm cover different jobs
- Works with propane, acetylene, hydrogen, propylene and natural gas
- The 2M trachea gives reach across the bench
Cons
- Needs gas and oxygen supplies, which add setup beyond the torch itself
- The 2M trachea and separate cylinders take more bench space than a self-contained torch
- 5 tip sizes to swap and store between jobs
- Green and red connectors must be matched to oxygen and gas, so setup needs care
Other machines to compare
SMITH JEWELRY TORCH OUTFIT -"THE LITTLE TORCH"Check price on Amazon
Fanttik T1 Max Cordless Soldering IronCheck price on Amazon
PINECILCheck price on Amazon
Hakko Soldering Iron for Stained GlassCheck price on Amazon
Weller W100PG Weller Farenheit Heavy Duty Soldering Iron withCheck price on Amazon
Weller 60W/120V Soldering IronCheck price on Amazon
Side by side
| Spec | Bernz-O-Matic ST2200T | Dremel VersaTip 2000-7 | RAVS Soldering Kit | TOAUTO Oxygen Torch |
|---|---|---|---|---|
| HQ Score | 76 | 71 | 65 | 59 |
| Side | Jewelry torch | Soldering iron | Soldering iron | Jewelry torch |
| Max temperature | Not stated | Not stated | 1250°C torch, 500°C soldering | 1700°C |
| Weight | 0.5 pounds | Not stated | 1.0 pounds | 0.6 pounds |
| Size | 3.0 x 6.5 x 9.5 inches | 12.99 x 4.21 x 1.85 inches | 6.5 x 1.8 x 6.0 inches | 7.48 x 1.97 x 5.51 inches |
| Tips and accessories | Spark igniting solder tip | 7 accessories | 14-piece kit | 5 replacement tips |
| Ignition | Built-in push button igniter | Integrated ignition with lock | Piezo ignition, one-touch | Not stated |
| Warranty | Limited 3-year warranty | Not stated | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 13 November 2026.
Jewelry torch vs soldering iron: heat and temperature
Heat is where the two sides part ways. The TOAUTO torch lists a maximum temperature of 1700°C (3092°F), enough to melt and cut iron, gold, silver and copper. The RAVS iron lists a maximum working temperature of 1250°C/2400°F for torch work and 500°C/950°F for soldering. The Bernz torch and the Dremel iron do not state a maximum temperature, so their heat is judged on flame and control rather than a rated figure.
Temperature control also splits the group. The Dremel iron offers variable temperature control, and the RAVS kit offers adjustable temperature control with piezo ignition. The Bernz torch keeps it simple with a precision needle point flame and a built-in push button igniter, while the TOAUTO torch relies on gas mix and tip size to shape the flame.
Size and weight on the bench
The Bernz torch measures 3.0 x 6.5 x 9.5 inches and weighs 0.5 pounds, the lowest stated weight here. The RAVS kit measures 6.5 x 1.8 x 6.0 inches and weighs 1.0 pounds, with a travel case for the 14-piece kit. The TOAUTO torch measures 7.48 inches x 1.97 inches x 5.51 inches and weighs 0.6 pounds, plus a 2M trachea that reaches across the bench. The Dremel iron measures 12.99 x 4.21 x 1.85 inches, and its listing does not state a weight.
Tips, accessories and what is in the box
The TOAUTO torch comes with 5 replacement tips in 1/8, 3/8, 5/8, 3/4 and 7/8 mm. The Dremel iron includes 7 accessories for 6 applications: soldering, pyrography, hot cutting, heat embossing, paint removal, and welding. The RAVS kit is a 14-piece set with a metal body, a leather case and a travel case. The Bernz kit includes a spark igniting solder tip with its precision needle point flame.
Ignition and safety
Ignition differs across the group. The Bernz torch has a built-in push button igniter. The RAVS kit uses piezo ignition with one-touch ignition. The Dremel iron adds an integrated ignition with a lock to prevent accidental ignition, plus a flame lock for a continuous flame. The TOAUTO listing does not state an ignition system.
Support and warranty
Only the Bernz torch states a warranty: a limited 3-year warranty. The RAVS kit states 1-year technical support, which is support rather than a warranty term. The Dremel iron and the TOAUTO torch state no warranty term.
Choose the jewelry torch if
- You repair jewelry in gold, silver, copper or iron and want the 1700°C maximum the TOAUTO lists.
- You want a simple precision flame with push button ignition, as the Bernz lists.
- You work with several gases and want to swap among 5 tip sizes.
Choose the soldering iron if
- You solder, do pyrography or hot cutting and want 7 accessories for 6 applications.
- You want a full kit with a case and adjustable temperature control.
- You want flame lock and an ignition lock for steady, guarded work.
Work on a heat-proof surface, ventilate the area, wear eye protection, and keep fuel away from flame. Lead solder is not for food-contact items.
Project Match
- Ring and chain repair in gold, silver or copper: the TOAUTO torch, rated to 1700°C for those metals.
- Small solder joints and heat-shrink tubing: the RAVS kit, with soldering at 500°C and a 14-piece set.
- Pyrography and hot cutting: the Dremel iron, with 7 accessories for 6 applications.
- Creme brulee and kitchen work plus jewelry repair: the Bernz torch.
- Glass blowing: the TOAUTO torch, which lists glass blowing among its applications.
FAQ: lasers and CNC
Can a soldering iron handle jewelry repair?
Yes, within limits. The RAVS kit lists jewelry applications among its uses, and the Dremel iron lists soldering among its 6 applications. For melting gold, silver, copper or iron, the TOAUTO torch lists a maximum of 1700°C, far above the 500°C the RAVS kit lists for soldering.
Which gets hotter, a jewelry torch or a soldering iron?
Here, the jewelry torch. The TOAUTO torch lists 1700°C (3092°F) as its maximum, while the RAVS iron lists 1250°C/2400°F for torch work and 500°C/950°F for soldering. The Bernz torch and the Dremel iron state no maximum temperature.
Do jewelry torches need a gas supply?
Yes. The TOAUTO torch works with propane, acetylene, hydrogen, propylene or natural gas, plus oxygen cylinders. The Bernz torch is a butane torch kit, and the RAVS kit and the Dremel iron run on butane gas, which is not included with either.
Can a jewelry torch solder electronics?
The TOAUTO torch lists electronics repair among its applications. For fine soldering work, the Dremel iron and the RAVS kit offer variable and adjustable temperature control, which suits small joints better than an open flame.
Related: soldering iron vs soldering station, soldering gun vs soldering iron, best soldering iron for electronics and how we pick.




