Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Solder Wire (2026)

Five tin-lead rosin core solder wires, from a 1-ounce Kester tube to 100 g spools, compared by alloy, diameter, flux and stated melting point.

Best Solder Wire (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MAIYUM 63-37 0.8mmBest OverallMAIYUM 63-37 0.8mm9.6/10View on Amazon
  2. 2WYcYcW 63/37 0.6mmBest Fine DiameterWYcYcW 63/37 0.6mm9.5/10View on Amazon
  3. 3YI LIN 60/40 0.6mmBest 100 g SpoolYI LIN 60/40 0.6mm9.4/10View on Amazon
  4. 4TOWOT Sn60-Pb40 0.8mmBest 50 g SpoolTOWOT Sn60-Pb40 0.8mm9.4/10View on Amazon

When a joint on a board goes dull or a wire pulls loose from a radio, the fix starts with the right solder wire. The best solder wire for electronics repair and DIY is a tin-lead rosin core wire that melts clean, flows into the joint and holds it. This roundup compares five tin-lead wires on alloy, diameter, flux content, weight and the melting point each listing states, so you can match the wire to the board in front of you.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall MAIYUM 63-37 0.8mm: 63-37 rosin core, 1.8% flux, 0.8 mm, 100 g, and a stated melting point of 361 F. Check price on Amazon
  • Best Fine Diameter WYcYcW 63/37 0.6mm: 0.6 mm 63/37 wire in a 3-pack, 27 g each, with a stated 361 F melting point. Check price on Amazon
  • Best 100 g Spool YI LIN 60/40 0.6mm: 60/40 rosin core, 1.8% flux, 100 g, for boards and home appliance repair. Check price on Amazon
  • Best 50 g Spool TOWOT Sn60-Pb40 0.8mm: 60/40 rosin core, 1.8% flux, 0.8 mm, 50 g, for boards and appliance repair. Check price on Amazon

Machines on the list

MAIYUM 63-37 Rosin Core Solder Wire 0.8mm100g Tin

MAIYUM 63-37 Rosin Core Solder Wire 0.8mm100g Tin

MAIYUM9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 63-37 rosin core wire at 0.8 mm and 100 g, with 1.8% flux and a stated melting point of 361 F.

Pros

  • Stated melting point of 361 F / 183 C
  • 100 g spool with 1.8% rosin flux
  • 0.8 mm diameter for boards and cable repair
  • Non-corrosive residue stated

Cons

  • No warranty term is stated
  • Contains lead, with a Proposition 65 warning stated
  • Only one diameter, 0.8 mm, stated
  • Only the 100 g size is stated
WYcYcW 3Pcs Solder Wire 63/37,High Purity Tin

WYcYcW 3Pcs Solder Wire 63/37,High Purity Tin

WYcYcW9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 63/37 rosin core wire at 0.6 mm and 27 g each, with 1.8% flux and a stated 361 F melting point.

Pros

  • Stated melting point of 361 F
  • Fine 0.6 mm diameter for boards and phone repair
  • 3 pieces at 27 g each
  • 1.8% rosin flux stated

Cons

  • No warranty term is stated
  • Contains lead, with a lead warning stated
  • Small 27 g pieces, not a single spool
  • No 0.8 mm option stated
YI LIN 60/40 Solder 100g Tin Lead Rosin Core

YI LIN 60/40 Solder 100g Tin Lead Rosin Core

YI LIN9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60/40 rosin core wire at 0.6 mm and 100 g, with 1.8% flux, for boards and appliance repair.

Pros

  • 100 g spool with 1.8% rosin flux
  • 0.6 mm diameter for electronic components
  • Stated for cable, TV, radio and stereo repair
  • Less residue stated

Cons

  • No melting point figure stated
  • Contains lead, with a Proposition 65 warning stated
  • Only the 100 g size is stated
  • No 63/37 alloy option stated
TOWOT Tin Lead Rosin Core Solder Wire

TOWOT Tin Lead Rosin Core Solder Wire

TOWOT9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60/40 rosin core wire at 0.8 mm and 50 g, with 1.8% flux, for boards and appliance repair.

Pros

  • 0.8 mm diameter for boards and appliances
  • 1.8% rosin flux stated
  • 50 g spool, a middle amount
  • Low melting point and fast soldering stated

Cons

  • No melting point figure stated
  • No lead warning stated
  • Only the 50 g size is stated
  • No 63/37 alloy option stated
Kester 44 Solder Wire, 63/37 0.031”, RMA Rosin

Kester 44 Solder Wire, 63/37 0.031”, RMA Rosin

Kester9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Kester 44 rosin core tube at 0.031 inch and 1 ounce, with about 24 feet of 63/37 wire.

Pros

  • RMA rosin stated
  • About 24 feet of wire in the tube
  • 1-ounce tube suits a small bench
  • 63/37 alloy for electronics work

Cons

  • No flux content figure stated
  • No melting point figure stated
  • Smallest amount here, a 1-ounce tube
  • No lead warning stated

Other machines to compare

Compare the best solder wire picks

HQ Score Alloy Diameter Flux Weight Melting point Safety note
MAIYUM 63-37 0.8mm 9.6/10 Sn63 Pb37 0.8 mm 1.8% 100 g 361 F / 183 C Prop 65 lead warning
WYcYcW 63/37 0.6mm 9.5/10 Sn63 Pb37 0.6 mm 1.8% 27 g each, 3 pcs 361 F Lead warning stated
YI LIN 60/40 0.6mm 9.4/10 Sn60 Pb40 0.6 mm 1.8% 100 g Not stated Prop 65 lead warning
TOWOT Sn60-Pb40 0.8mm 9.4/10 Sn60 Pb40 0.8 mm 1.8% 50 g Not stated Not stated
Kester 44 0.031 in 9.3/10 63/37 0.031 in Not stated 1 oz tube Not stated Not stated

Size and performance figures are the brand’s ratings quoted from listings on 14 November 2026. Diameter is the wire diameter the listing states.

What the listings tell you, and what they leave out

Four of the 5 listings state a flux content of 1.8%, and the Kester listing states none. Two of the 5 state a melting point, both 63/37 wires at 361 F, while the 60/40 wires state no melting point figure. Three of the 5 state a lead warning, and none of the 5 states a warranty term.

Diameter is the figure that varies most: the wires here run from 0.6 mm to 0.8 mm, plus the Kester tube at 0.031 inch, and weight runs from a 1-ounce tube to 100 g spools. Flux content is the most consistent figure, at 1.8% wherever the listing states it, and the melting point is the least stated, with only the two 63/37 wires giving a figure.

Buying guide: choosing solder wire

63/37 vs 60/40

Three wires here are 63/37 and two are 60/40. Both 63/37 wires that state a melting point list 361 F, while neither 60/40 wire states one. If you want a stated melting point, the choice is a 63/37 wire. If you want a 100 g spool, the choice is between the 63/37 MAIYUM spool and the 60/40 YI LIN spool.

Diameter: 0.6 mm or 0.8 mm

The 0.6 mm wires are the WYcYcW 3-pack and the YI LIN spool, and the 0.8 mm wires are the MAIYUM and TOWOT spools. The listings pair 0.6 mm wire with circuit boards and phone repair, and 0.8 mm wire with boards, cable and appliance repair. The Kester tube is 0.031 inch. Pick the diameter by the joints you solder most: fine work on boards leans to 0.6 mm, while cable and appliance joints lean to 0.8 mm.

Flux core and residue

Four of the 5 wires state a rosin core with 1.8% flux content; the Kester listing states RMA rosin with no flux figure. The MAIYUM listing states a non-corrosive residue. Rosin core wire carries its flux inside the wire, so the flux figure is the one to compare when two wires share an alloy and a diameter.

Lead safety and ventilation

All 5 wires here are tin-lead, and 3 state a California Proposition 65 lead warning. Lead solder is not for food-contact items. Work with ventilation, eye protection and a heat-proof surface, and keep the wire away from food and drink. Wash your hands after soldering, and store the spool where children cannot reach it.

Project Match

  • Circuit board repair: MAIYUM, TOWOT, YI LIN and WYcYcW all name circuit boards in their stated uses.
  • Phone repair: the WYcYcW 3-pack names phone repair, with 0.6 mm wire for small joints.
  • TV, radio and home appliance repair: MAIYUM, TOWOT, YI LIN and WYcYcW name TVs and radios, and TOWOT and YI LIN also name home appliances.
  • General electronics work: the Kester 44 tube, a 63/37 RMA rosin wire in a 1-ounce tube holding about 24 feet of solder.
  • DIY and home improvement: MAIYUM, TOWOT and YI LIN name DIY work and home improvement.

How the scores add up

Each wire is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
MAIYUM 63-37 0.8mm 9.6 30 21 21 3 0
WYcYcW 63/37 0.6mm 9.5 29 20 21 3 0
YI LIN 60/40 0.6mm 9.4 27 19 20 3 0
TOWOT Sn60-Pb40 0.8mm 9.4 28 20 20 0 0
Kester 44 0.031 in 9.3 26 19 18 0 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

FAQ: lasers and CNC

Which soldering lead is best?

For a stated melting point, the 63/37 wires are the ones that state one: the MAIYUM and WYcYcW wires both list 361 F. For the largest spool, the MAIYUM and YI LIN wires are 100 g. Match the alloy and diameter to the board: 0.6 mm wire for boards and phone repair, 0.8 mm wire for boards, cable and appliance repair, as the listings state them.

How much soldering lead do I need?

The wires here run from a 1-ounce tube to 100 g spools. The Kester tube holds about 24 feet of solder, the TOWOT spool is 50 g, the WYcYcW pack is 3 pieces of 27 g each, and the MAIYUM and YI LIN spools are 100 g each. Pick the amount by the size of the job: a tube for a single repair, a spool for a bench that solders often.

How do I choose soldering lead?

Start with the alloy: 63/37 or 60/40, as the listings state them. Then the diameter: 0.6 mm or 0.8 mm here, plus the Kester tube at 0.031 inch. Then the flux content: 4 of the 5 wires state 1.8% rosin flux. Then the amount: 27 g to 100 g across the wires here, plus the 1-ounce Kester tube.

Do I need soldering paste?

Not for the wires here. Each wire here is a rosin core wire, so the flux is inside the wire, and 4 of the 5 state a flux content of 1.8%. If you want to compare paste and flux, see our soldering flux vs soldering paste guide.

Related: our soldering hub, best soldering iron for electronics, lead-free vs leaded solder, and best beginner soldering kit. Also see our electronics making hub.

More buying guides

Soldering ·

Best Solder for Aluminum (2026)

Five solder wires compared by alloy, diameter, flux and stated use, with only one made for aluminum.