CoreXY vs Bed Slinger 3D Printer: Which One Should You Buy?
CoreXY moves the print head on belts while the bed moves only in Z, and a bed slinger moves the bed back and forth, so this guide compares the two layouts and three CoreXY printers by speed, build volume and features.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Bambu Lab P1S 3D Printer9.7/10View on Amazon - 2
FLASHFORGE Adventurer 5M Pro 3D Printer9.7/10View on Amazon - 3
FLASHFORGE AD5X Multi-Color & Material 3D Printer with IFS9.7/10View on Amazon - 4
Bambu Lab P1S ComboView on Amazon - 5
FLASHFORGE AD5X 3D PrinterView on Amazon - 6
Creality 3D Printer Glue Sticks for Hot Bed Warping ReducingView on Amazon - 7
Creality 3D Printer Glue Sticks for Hot BedView on Amazon - 8
Creality 3D Printer Bed Adhesive 80mlView on Amazon - 9
Creality 3D Printer Glue Sticks PVP Solid Glue Sticks for 3DView on Amazon
The corexy vs bed slinger 3d printer question comes down to one moving part: the bed. A CoreXY printer moves the print head on belts while the bed moves only up and down, and a bed slinger moves the bed back and forth while the head moves across and up. That difference shapes speed, footprint and what the printer shakes as it works, so this guide compares the two layouts, then three CoreXY printers, by speed, build volume and features.
Other machines to compare
Bambu Lab P1S ComboCheck price on Amazon
FLASHFORGE AD5X 3D PrinterCheck price on Amazon
Creality 3D Printer Glue Sticks for Hot Bed Warping ReducingCheck price on Amazon
Creality 3D Printer Glue Sticks for Hot BedCheck price on Amazon
Creality 3D Printer Bed Adhesive 80mlCheck price on Amazon
Creality 3D Printer Glue Sticks PVP Solid Glue Sticks for 3DCheck price on Amazon
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
All three printers in the gear section use a CoreXY structure, and no bed slinger is among the listings here, so the bed slinger side of this guide describes the layout in general terms while the CoreXY side uses the three listings. Compare the printers on what each listing states, and check the listing before you buy.
CoreXY vs bed slinger: the short answer
Pick CoreXY when you want the print head to do the moving and the bed to stay put except for height. The QIDI listing describes a full-metal CoreXY structure with precision linear rails, and the AD5M set describes a CoreXY structure with vibration compensation. Pick a bed slinger when you want a machine with a bed that slides back and forth under the head, and room for it to travel.
How CoreXY motion works: corexy vs bed slinger 3d printer
In a CoreXY printer, two belts move the print head across the bed while the bed moves only up and down for height. The QIDI listing describes a full-metal CoreXY structure with precision linear rails, and the AD5M set describes a CoreXY structure with vibration compensation. Because the bed does not shuttle back and forth, the print itself stays still while the head moves. The QIDI listing states a 1.5GT synchronous belt that reduces vibration artifacts, and the AD5M set states vibration compensation.
How a bed slinger moves
In a bed slinger, the bed carries the print back and forth while the head moves across and up. The print itself rides the bed, so a tall print sways more as the bed changes direction, and the bed needs clear space behind the printer to travel. The layout uses fewer moving parts in the head.
Speed and print quality
All three listings here state a maximum speed of 600mm/s, and the two Flashforge listings state a maximum acceleration of 20,000mm/s². The QIDI listing adds a 1.5GT synchronous belt that reduces vibration artifacts, and the AD5M set lists a nozzle flow of 32mm³/s with 50w heating power that heats to 200˚C in 35 seconds.
Build volume and footprint
Build volume decides the largest part you can print in one piece. The QIDI Q2 Combo lists a build volume of 270x270x256mm in a machine that measures 21.0 inches by 20.0 inches by 23.0 inches, while the AD5M lists 220×220×220mm in a machine that measures 15.9 inches by 14.3 inches by 17.7 inches and weighs 27.59 pounds. A CoreXY printer keeps its footprint close to its frame, while a bed slinger needs extra bench depth for the bed to slide.
Enclosed or open
An enclosure holds heat in, which helps materials that warp, and it keeps dust and drafts out. The QIDI Q2 Combo lists a 2nd-generation PTC heated chamber at 65℃, a triple filtration system with a G3 pre-filter, H12 HEPA and activated carbon, and a flame-retardant chamber. The AD5M lists an optional enclosure, and the AD5M with the enclosure set lists accessories to build one yourself. The AD5M on its own is open, with an optional enclosure for high-performance materials, while the QIDI heated chamber suits ABS, PA, PC and carbon-fiber composites.
Which one should you buy
Choose by the prints you make and the bench you have. If you print tall parts at speed and want the bed to move only in height, a CoreXY printer fits, and the three here all state 600mm/s. If you print small parts and want a simpler machine, a bed slinger fits. If you print ABS, PA or PC, look for a heated chamber like the 65℃ chamber on the QIDI. Check the build volume against the largest part you print, and the nozzle temperature against the material: the QIDI lists a 370℃ nozzle and the AD5M lists a high-temp extruder up to 280°C.
Three CoreXY printers to compare
All three printers here use a CoreXY structure, ranked here by what each listing states: the QIDI Q2 Combo first, the AD5M second, and the AD5M with enclosure accessories third.
QIDI Q2 Combo
The QIDI Q2 Combo lists up to 16-color multi-material printing with dry-while-print technology, a 65℃ drying system in the QIDI BOX, and support for PLA, ABS, PETG, TPU, PA, PC and carbon/glass-fiber composites. The build volume is 270x270x256mm, the nozzle goes to 370℃, the heated chamber holds 65℃, and the speed is up to 600mm/s. The listing adds an AI camera, filament run-out and tangle detection, power-loss recovery and lifetime technical support. The warranty is 1 year.
FLASHFORGE AD5M
The AD5M lists a CoreXY structure at 600mm/s with 20,000mm/s² acceleration, 1-click auto leveling with a pressure sensor, and a high-temp direct drive extruder up to 280°C with 3-second quick-swap nozzles in sizes from 0.25 to 0.8mm. The build volume is 220×220×220mm, the machine weighs 27.59 pounds, and the listing adds the Flash Maker app, power loss recovery, filament runout detection and object skipping. The warranty is a year, with the nozzle and platform at 3 month.
Flashforge AD5M with Enclosure Accessories Set
This set pairs the AD5M with enclosure accessories, so you build an enclosed printer yourself rather than buying one ready enclosed. The listing states a maximum speed of 600mm/s, a maximum acceleration of 20000mm/s², a nozzle flow of 32mm³/s, 50w heating power and heat to 200˚C in 35 seconds. The listing states no build volume, dimensions, weight or warranty, so compare it on the base AD5M figures and check the listing before you buy.
Common mistakes to avoid
- Buying for the headline speed alone, without checking acceleration and flow.
- Picking a build volume smaller than the largest part you print.
- Printing ABS, PA or PC in an open printer with no heated chamber.
- Forgetting bench depth for a bed slinger, or headroom for a tall CoreXY frame.
- Skipping the listing check for warranty, nozzle temperature and enclosure.
FAQ: lasers and CNC
Is CoreXY faster than a bed slinger?
The listings here state 600mm/s for all three CoreXY printers, with 20,000mm/s² acceleration on the two Flashforge listings. No bed slinger is among the listings here, so there is no bed slinger speed to compare against.
Do I need an enclosed 3D printer?
It depends on the material. The QIDI Q2 Combo lists a heated chamber at 65℃ for ABS, PA, PC and carbon-fiber composites, which warp in open air. The AD5M lists an optional enclosure for high-performance materials, so an open printer works until your material needs heat.
What build volume do I need?
Match it to the largest part you print in one piece. The QIDI lists 270x270x256mm and the AD5M lists 220×220×220mm, so the QIDI fits larger parts.
Can a CoreXY printer use the same filament as a bed slinger?
Yes, the motion system does not decide the material. The QIDI lists PLA, ABS, PETG, TPU, PA, PC and carbon/glass-fiber composites with a 370℃ nozzle, while the AD5M lists a high-temp extruder up to 280°C.
How long does a 3D printer take to heat up?
The AD5M set lists heat to 200˚C in 35 seconds with 50w heating power.
Related: the best dual Z axis 3D printer kit, best 3D printer lube and grease, SLA vs DLP 3D printer, and our 3D printers hub.




