Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Glue Stick for Petg 3d Printing (2026): 5 Sticks Compared

5 PVP glue sticks for PETG 3D printing, compared by pack size, formula, bed surfaces, filaments and cleanup, for PLA, ABS, PETG, PC, PA and TPU.

Best Glue Stick for Petg 3d Printing (2026): 5 Sticks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Creality 4-Pack SticksBest OverallCreality 4-Pack Sticks9.7/10View on Amazon
  2. 2Comgrow 4-Pack SticksBest 4-Pack ValueComgrow 4-Pack Sticks9.6/10View on Amazon
  3. 3Outus 2-Pack SticksBest Long-LastingOutus 2-Pack Sticks9.6/10View on Amazon
  4. 4KRAFTPROTZ 21 g StickBest Cold Plate StickKRAFTPROTZ 21 g Stick9.6/10View on Amazon

A PETG print that lifts off the bed halfway through wastes filament and time, and a warped first layer never flattens out. A glue stick made for a hot bed holds the first layer down while the print runs, then lets the part release once the plate cools.

This guide compares the best glue stick for petg 3d printing options by pack size, formula, bed surfaces, filaments and cleanup.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Creality 4-Pack Sticks: 4 solid sticks with strong anti-warping adhesion on glass, PEI, PEO and textured plates. Check price on Amazon
  • Best 4-Pack Value Comgrow 4-Pack Sticks: 4 sticks at 21 g each, officially produced by Creality, for PLA, ABS, PETG, PC, PA and TPU. Check price on Amazon
  • Best Long-Lasting Outus 2-Pack Sticks: 1 stick lasts for more than 100 average prints, with a 0.78 x 4 in stick for thin coats. Check price on Amazon
  • Best Cold Plate Stick KRAFTPROTZ 21 g Stick: A 21 g solvent free stick for cold plate application and water soluble cleanup. Check price on Amazon

Machines on the list

Creality 3D Printer Glue Sticks for Hot Bed

Creality 3D Printer Glue Sticks for Hot Bed

Creality9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pack of 4 PVP glue sticks with strong anti-warping adhesion for PLA, ABS, PETG, PC, PA and TPU, on glass, PEI, PEO and textured plates.

Pros

  • 4 solid sticks in each pack for frequent printing
  • Strong anti-warping adhesion at high temperatures
  • Works on glass, PEI, PEO, textured plates and low-temp plates
  • Water washable with no sticky residue left

Cons

  • No warranty term stated on the listing
  • No stick size stated on the listing
  • No safety certification stated on the listing
4 Pack Creality 3D Printer Glue Sticks Enhanced

4 Pack Creality 3D Printer Glue Sticks Enhanced

Comgrow9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pack of 4 Creality glue sticks at 21 g each, with a PVP formula and no formaldehyde, for PLA, ABS, PETG, PC, PA and TPU.

Pros

  • 4 sticks, each weighing 21 g / 0.74 oz
  • Officially produced by Creality
  • Low odor PVP with no formaldehyde
  • Water cleanup after the build plate cools

Cons

  • No warranty term stated on the listing
  • No bed surfaces named on the listing
  • No safety certification stated on the listing
Outus 2 3D Printer Glue Sticks for Hot Bed PVP 3D

Outus 2 3D Printer Glue Sticks for Hot Bed PVP 3D

Outus9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pack of 2 blue PVP glue sticks, each 0.78 x 4 in and stated to last for more than 100 average prints, for PLA, ABS, PETG, PC and TPU.

Pros

  • 1 stick lasts for more than 100 average prints
  • Non-toxic and acid-free PVP formula
  • Each stick measures 0.78 x 4 in
  • Works on build surface sheet, aluminum and glass plates

Cons

  • No PA listed among the filaments
  • No warranty term stated on the listing
  • Lid must go back on after each use to prevent drying out
  • No safety certification stated on the listing
Creality 3D Printer Glue Sticks for Hot Bed

Creality 3D Printer Glue Sticks for Hot Bed

Creality9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pack of 2 Creality PVP glue sticks for PLA, ABS, PETG, PC, PA and TPU, water washable with no residue.

Pros

  • 2 sticks in each pack
  • PVP formula without formaldehyde
  • Thin coatings with easy demolding after cooling
  • Water washable with no residue left

Cons

  • No stick size stated on the listing
  • No bed surfaces named on the listing
  • No warranty term stated on the listing
  • No safety certification stated on the listing
3D Print Bed Adhesion Glue Stick 21 g

3D Print Bed Adhesion Glue Stick 21 g

KRAFTPROTZ9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 21 g solvent free glue stick for first layer adhesion on the build plate, for PLA, ABS, PETG, PC, PA and TPU.

Pros

  • 21 g stick for controlled application
  • Solvent free, water soluble formula
  • Applies on a cold plate with a thin layer
  • Covers PLA, ABS, PETG, PC, PA and TPU

Cons

  • 1 stick, the smallest pack here
  • No warranty term stated on the listing
  • No bed surfaces named on the listing
  • No safety certification stated on the listing

Other machines to compare

Specs compared

Model HQ Score Pack Stick size Formula Filaments Bed surfaces Warranty
Creality 4-Pack Sticks 9.7/10 4 sticks Not stated PVP, formaldehyde-free PLA, ABS, PETG, PC, PA, TPU Glass, PEI, PEO, textured, low-temp Not stated
Comgrow 4-Pack Sticks 9.6/10 4 sticks 21 g / 0.74 oz PVP, no formaldehyde PLA, ABS, PETG, PC, PA, TPU Not stated Not stated
Outus 2-Pack Sticks 9.6/10 2 sticks 0.78 x 4 in PVP, non-toxic, acid-free PLA, ABS, PETG, PC, TPU Build surface sheet, aluminum, glass Not stated
Creality 2-Pack Sticks 9.6/10 2 sticks Not stated PVP, formaldehyde-free PLA, ABS, PETG, PC, PA, TPU Not stated Not stated
KRAFTPROTZ 21 g Stick 9.6/10 1 stick 21 g Solvent free PLA, ABS, PETG, PC, PA, TPU Not stated Not stated

Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. Pack counts follow the title and bullets over the spec table where they differ.

How the scores work

Each stick earns an HQ Score from performance, build, value, safety and warranty, weighted as published on the How We Pick page. No listing states a warranty term, so every stick scores zero on warranty, and no listing states a safety certification, so every stick scores zero on safety.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Creality 4-Pack Sticks 9.7 30 21 22 n/a 0
Comgrow 4-Pack Sticks 9.6 30 21 21 n/a 0
Outus 2-Pack Sticks 9.6 29 21 21 n/a 0
Creality 2-Pack Sticks 9.6 29 21 20 n/a 0
KRAFTPROTZ 21 g Stick 9.6 28 20 20 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

What the listings tell you, and what they leave out

5 glue stick listings were compared. All 5 state a PVP formula, and 3 state no formaldehyde. 2 listings state a pack of 4 and 2 state a pack of 2, while 1 lists a 21 g stick. 1 stick is stated to last for more than 100 average prints. No listing states a warranty term, and no listing states a safety certification.

Treat every stick as a consumable: apply a thin coat, let the print cool, and wash the plate with water.

Buying guide: the best glue stick for petg 3d printing

Pack size

A pack of 4 suits frequent printing, while a pack of 2 or a 21 g stick suits occasional use. 1 stick is stated to last for more than 100 average prints, so a pack of 2 can cover a long run of prints.

PVP formula

Every stick here uses a PVP formula. 3 state no formaldehyde, 1 states non-toxic and acid-free, and 1 states solvent free. All 5 wash off with water, and none states a need for solvents or scraping.

Bed surfaces

The Creality 4-pack lists glass, PEI, PEO, textured plates and low-temp plates. The Outus sticks list build surface sheet plate, aluminum and glass plate. The other listings state wide compatibility with common printing bed surfaces without naming them.

Filaments

All 5 sticks list PLA, ABS, PETG, PC and TPU, and 4 of the 5 also list PA. PETG is the focus here, and the same stick covers the other filaments when a project changes material.

Application and cleanup

Apply a thin coat to the effective printing area, not the whole surface. The KRAFTPROTZ stick goes on a cold plate, while the others go on a hot bed. After cooling, prints release and residue washes off with water.

Project Match

  • PETG parts on glass, PEI, PEO or textured plates: Creality 4-Pack Sticks, which names those surfaces.
  • PETG parts on aluminum or build surface sheet plates: Outus 2-Pack Sticks.
  • A 4-pack for PLA, ABS, PETG, PC, PA and TPU: Comgrow 4-Pack Sticks, 4 sticks at 21 g each.
  • Cold plate preparation with a 21 g stick: KRAFTPROTZ 21 g Stick.
  • School projects and art crafts: Outus 2-Pack Sticks, listed as suitable for school projects and art crafts.

FAQ: lasers and CNC

How to use PETG filament?

Print PETG filament on a hot bed with a glue stick for adhesion: apply a thin coat to the effective printing area, print, let the plate cool, and wash the plate with water. The sticks here list PETG among PLA, ABS, PETG, PC, PA and TPU.

Does PETG filament need an enclosure?

The listings compared here state nothing about enclosures. They state glue sticks for hot bed adhesion, which hold the first layer down while the print runs.

How long does 1 glue stick last?

1 Outus stick is stated to last for more than 100 average prints. The other listings state no stick life, so plan on the pack count: 4 sticks in the 4-packs, 2 sticks in the 2-packs, and 1 stick at 21 g in the KRAFTPROTZ pack.

Which filaments do these glue sticks cover?

All 5 sticks list PLA, ABS, PETG, PC and TPU, and 4 of the 5 also list PA. The Outus sticks list PLA, ABS, PETG, PC and TPU without PA.

How do you clean a glue stick off the build plate?

All 5 sticks wash off with water after the plate cools. Rinse the build plate with water, and no sticky residue remains. No listing states a need for solvents or scraping.

Related: the best PETG filament green, the best PETG filament storage, the best glue stick for 3d printer build plate and the 3D printers hub.

More buying guides