Best Metal Business Card Blanks 0.8 Mm (2026)
5 metal business card blanks at 0.8 mm, in stainless steel and anodized aluminum, compared by material, pack size, finish and laser guidance.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLyksgir 50 Steel Cards9.5/10View on Amazon - 2
Best Steel ValueAOKLIT 30 Steel Cards9.5/10View on Amazon - 3
Best Blue AluminumPATIKIL 15 Blue Cards9.5/10View on Amazon - 4
Best With Sleevesebamaz 10 Red Cards9.4/10View on Amazon
A metal business card lands differently from a paper one: it has weight, it does not bend in a wallet, and the engraving stays put. The best metal business card blanks 0.8 mm give a maker a steel or anodized aluminum card the size of a bank card, ready for a fiber laser, so a batch of cards leaves a lasting impression.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Lyksgir 50 Steel Cards: 50 pack of 304 stainless steel blanks, 0.8 mm thick, blank on both sides. Check price on Amazon
- Best Steel Value AOKLIT 30 Steel Cards: 30 pack of 304 stainless steel blanks at 0.5 lb, 0.8 mm thick. Check price on Amazon
- Best Blue Aluminum PATIKIL 15 Blue Cards: 15 pack of blue anodized aluminum blanks, coated on both sides for laser engraving. Check price on Amazon
- Best With Sleeves ebamaz 10 Red Cards: 10 red anodized aluminum cards in individual sleeves, with fiber laser guidance. Check price on Amazon
Machines on the list

50 Pcs 304 Stainless Steel Metal Business Cards
A 50 pack of 304 stainless steel business card blanks, 0.8 mm thick and 3.4 by 2.1 inches, blank on both sides with a polished surface.
Pros
- 50 pack of 304 stainless steel, the largest steel pack here
- Blank on both sides for laser engraving or etching
- Resists bending, warping and corrosion, per the listing
- Polished surface with precise edges
Cons
- No warranty term stated
- No weight stated
- Silver color only
- No sleeves or packaging stated

AOKLIT 30Pcs Metal Business Card Blanks
A 30 pack of 304 stainless steel business card blanks, 0.8 mm thick and 3.4 by 2.1 inches, blank on both sides, at 0.5 lb.
Pros
- 30 pack of 304 stainless steel
- Blank on both sides for text, letters or designs
- Weight stated at 0.5 lb
- Resistant to breaking, warping or bending, per the listing
Cons
- No warranty term stated
- Silver color only
- No sleeves or packaging stated
- Size given as both 3.4 by 2.1 inches and 3.39 by 2.13 inches

PATIKIL 15 Pack Metal Business Cards Anodized
A 15 pack of blue anodized aluminum business card blanks, 0.8 mm thick and 3.4 by 2.1 inches, coated on both sides for laser engraving.
Pros
- Blue anodized aluminum with a protective layer
- Coated on both sides, ready for laser engraving
- Smooth edges, no scratches on both sides, per the listing
- Same size as a credit card, compact and portable
Cons
- Not for sublimation transfer printing, per the listing
- No warranty term stated
- 15 pack only, no bulk pack stated
- Blue color only

Ebamaz Metal Business Cards Anodized Aluminum
A 10 pack of red anodized aluminum business card blanks, 86 by 54 by 0.8 mm, each in an individual plastic sleeve, with round corners.
Pros
- Each card in an individual plastic sleeve
- Round corners, edges are not rough
- Fiber laser guidance stated: 15W or higher recommended
- Color anodized edges
Cons
- Only 10 cards, the smallest pack here
- No warranty term stated
- Needs a fiber laser of 15W or higher, per the listing
- Red color only

Tenare 100 Pieces Metal Business Card Blanks
A 100 pack of black anodized aluminum business card blanks, 0.8 mm thick and 3.4 by 2.1 inches, with a matte black texture and rounded corners, at 2.2 lb.
Pros
- 100 pack, the largest pack here
- Matte black texture, smooth surface, rounded corners
- Weight stated at 2.2 lb
- Sharp-edge warning stated, with glove guidance
Cons
- No warranty term stated
- Black color only
- Sharp edges, per the listing
Other machines to compare
Tenare 200 Pieces Metal Business Card BlanksCheck price on Amazon
JJUNW 50 Pcs Blank Metal Business Cards 0.8 mm ThicknessCheck price on Amazon
100 Pcs Black Metal Business Cards BlanksCheck price on Amazon
100PCS Thin Aluminum Alloy Metal Business Cards Blanks GreenCheck price on Amazon
100 Pcs Metal Business Card Blanks Laser Engraving PremiumCheck price on Amazon
Specs compared
| Model | HQ Score | Pack | Material | Thickness | Size | Warranty |
|---|---|---|---|---|---|---|
| Lyksgir 50 Steel Cards | 9.5/10 | 50 | 304 stainless steel | 0.8 mm | 3.4 x 2.1 in | Not stated |
| AOKLIT 30 Steel Cards | 9.5/10 | 30 | 304 stainless steel | 0.8 mm | 3.4 x 2.1 in | Not stated |
| PATIKIL 15 Blue Cards | 9.5/10 | 15 | Anodized aluminum | 0.8 mm | 3.4 x 2.1 in | Not stated |
| ebamaz 10 Red Cards | 9.4/10 | 10 | Anodized aluminum | 0.8 mm | 3.4 x 2.1 in | Not stated |
| Tenare 100 Black Cards | 9.3/10 | 100 | Anodized aluminum | 0.8 mm | 3.4 x 2.1 in | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. Where a listing contradicts itself, both figures are shown.
What the listings tell you, and what they leave out
We read 5 metal business card listings. All 5 are 0.8 mm thick and 3.4 by 2.1 inches. Only 2 are stainless steel, 2 stated a weight in plain figures, and 1 warns of sharp edges. One listing contradicts itself on pack size, and 1 gives laser guidance with watt figures.
Buying guide: the best metal business card blanks 0.8 mm for your laser
Steel or aluminum
Two of the 5 are 304 stainless steel: the Lyksgir 50 pack and the AOKLIT 30 pack, both blank on both sides with a polished or smooth surface. The other 3 are anodized aluminum: red, blue and black, with the anodization said to protect against scratches, corrosion and fading. Steel suits a plain, heavy card; anodized aluminum suits a colored card.
Pack size
Pack sizes run from 10 to 100: the ebamaz pack holds 10, the PATIKIL pack 15, the AOKLIT pack 30, the Lyksgir pack 50, and the Tenare pack 100. The Tenare listing contradicts itself here: the title and spec table say 100 pieces while the bullets say you will get 20 pieces, so check the count when the box arrives.
Laser guidance
Only the ebamaz listing gives laser guidance with watt figures: a fiber laser machine of 15W or higher is recommended, lower watt machines of 5W or less might not engrave well, and a CO2 engraver is not recommended for metal surfaces. The PATIKIL listing adds that its cards are for laser engraving, not for sublimation transfer printing.
Edges and handling
Edges matter on a card that goes in a wallet. The ebamaz listing says its corners are round and its edges are not rough, and each card comes in an individual plastic sleeve to keep it fingerprint-free until engraving. The Tenare listing warns the product may have sharp edges and says to wear protective gloves if necessary.
The ebamaz listing recommends a fiber laser machine of 15W or higher for metal, and says a CO2 engraver is not recommended for metal surfaces. Check your machine against the listing before ordering blanks.
Project Match
- Business cards for a shop: the Lyksgir 50 pack, 304 stainless steel, blank on both sides.
- Gifts and VIP cards: the AOKLIT 30 pack, 304 stainless steel for engraving.
- Colored blanks: the PATIKIL 15 pack in blue, and the ebamaz 10 pack in red.
- Bulk events: the Tenare 100 pack in black, with a sharp-edge warning to heed.
How the scores add up
Each blank is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Only the Tenare listing states a safety warning, for sharp edges, and none states a warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Lyksgir 50 Steel Cards | 9.5 | 32 | 22 | 21 | 0 | 0 |
| AOKLIT 30 Steel Cards | 9.5 | 30 | 21 | 21 | 0 | 0 |
| PATIKIL 15 Blue Cards | 9.5 | 29 | 21 | 20 | 0 | 0 |
| ebamaz 10 Red Cards | 9.4 | 28 | 20 | 20 | 0 | 0 |
| Tenare 100 Black Cards | 9.3 | 24 | 18 | 18 | 3 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What laser do I need for metal business cards?
The ebamaz listing recommends a fiber laser machine of 15W or higher for metal. It says lower watt machines of 5W or less might not engrave well, and that a CO2 engraver is not recommended for metal surfaces.
What size are these blanks?
All 5 are 0.8 mm thick and 3.4 by 2.1 inches, or 86 by 54 mm. The listings describe them as the same size as a bank card or a credit card, so they fit a wallet or a card case.
Can I use these blanks for sublimation?
The PATIKIL listing says its cards are for laser engraving, not for sublimation transfer printing. The other listings state no sublimation guidance, so check your listing before ordering for sublimation work.
How many cards come in a pack?
The packs hold 10, 15, 30, 50 or 100 cards. The Tenare listing contradicts itself: the title and spec table say 100 pieces while the bullets say you will get 20 pieces.
Do metal business cards have sharp edges?
The Tenare listing warns the product may have sharp edges and says to wear protective gloves if necessary. The ebamaz listing says its corners are round and its edges are not rough.
Related: the best fiber laser engraver, the laser engraver for metal parts, the fiber laser engraving settings for brass, our engraving materials hub. Also see our how to color engrave stainless steel with a MOPA laser. Also see our laser engraver vs sublimation printer.




