Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Wood vs Metal Business Cards: Which One Should You Buy?

A cherry wood NFC card and anodized aluminum blanks compared on material, thickness, size, pack and tap-to-share, so you can pick the card that fits your brand.

Wood vs Metal Business Cards: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1weparmeety 100Pcs 0.45 Metal Business Cardsweparmeety 100Pcs 0.45 Metal Business Cards9.7/10View on Amazon
  2. 2weparmeety 100 Pcs Metal Business Cards Aluminumweparmeety 100 Pcs Metal Business Cards Aluminum9.6/10View on Amazon
  3. 3OLYCRAFT 20Pcs Wooden NFC Cards 3.3x2.1 Inch LightOLYCRAFT 20Pcs Wooden NFC Cards 3.3x2.1 Inch Light9.6/10View on Amazon

At a market stall or a client meeting, the card you hand over sells a little before you say a word. A wood card has a warm, wheat-colored surface with a natural grain, while a metal card has a frosted anodized surface with rounded corners. This guide compares wood vs metal business cards through cards from the listings: a cherry wood card with a built-in NFC chip and anodized aluminum engraving blanks in a spread of colors and thicknesses.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: Pick the wood card if you want a tap-to-share card that hands over contact details with a phone tap, since it is the only listing here with an NFC chip. Pick a metal card if you want an engraved card in a color that matches your brand, in a 100-card pack.

Machines on the list

weparmeety 100Pcs 0.45 Metal Business Cards

weparmeety 100Pcs 0.45 Metal Business Cards

weparmeety9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100-pack of anodized aluminum business card blanks in 10 colors, 0.45 mm thick, with rounded corners and a frosted finish.

Pros

  • 100 cards in 10 colors
  • 0.45 mm anodized aluminum, sturdy and not easy to bend
  • Rounded corners and a frosted surface that stays free of fingerprints
  • Listed as laser engraving blanks for patterns and text

Cons

  • No NFC chip is stated, so no tap-to-share
  • No laser type or power guidance is stated
  • Thicker than the 0.21 mm card, at 0.45 mm
  • No warranty term is stated
weparmeety 100 Pcs Metal Business Cards Aluminum

weparmeety 100 Pcs Metal Business Cards Aluminum

weparmeety9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100-pack of purple anodized aluminum business card blanks, 0.21 mm thick, with rounded corners and a frosted finish.

Pros

  • 100 cards in purple, a matching run for a purple brand
  • 0.21 mm thin profile that slips into a wallet or purse
  • Rounded corners and a frosted surface that stays free of fingerprints
  • Listed as laser engraving blanks for patterns and text

Cons

  • Purple only, with no other color in this pack
  • No NFC chip is stated, so details go on the face
  • No laser type or power guidance is stated
  • No warranty term is stated
OLYCRAFT 20Pcs Wooden NFC Cards 3.3x2.1 Inch Light

OLYCRAFT 20Pcs Wooden NFC Cards 3.3x2.1 Inch Light

OLYCRAFT9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-pack of cherry wood business card blanks with a built-in NTAG213 NFC chip, 85 x 54 mm, for tap-to-share digital contact cards.

Pros

  • Built-in NTAG213 chip for tap-to-share contact and social profile sharing
  • Natural cherry wood with a warm, wheat-colored surface and unique grain
  • 85 x 54 mm, matching conventional business card dimensions
  • 20 cards per pack for a small run of networking cards

Cons

  • Laser engraving is not stated in the listing
  • 20 cards per pack, the smallest pack here
  • Cherry wood only; no other wood or color is stated
  • No guidance is stated for writing contact details to the chip

Other machines to compare

Side by side

Spec weparmeety 0.45mm Cards weparmeety 0.21mm Cards OLYCRAFT Wood NFC Cards
HQ Score 61 59 58
Material Anodized aluminum Anodized aluminum Cherry wood
Thickness 0.45 mm (0.02 in) 0.21 mm (0.01 in) 1.5 mm (0.05 in)
Size 86 x 54 mm (3.38 x 2.12 in) 86 x 54 mm (3.38 x 2.12 in) 85 x 54 mm (3.3 x 2.1 in)
Pack 100 cards, 10 colors 100 cards, purple 20 cards
Chip Not stated in the listing Not stated in the listing NTAG213 NFC chip
Finish Frosted, rounded corners Frosted, rounded corners Natural grain, light brown
Warranty Not stated in the listing Not stated in the listing Not stated in the listing

Specs are what each manufacturer publishes as its rating on the listing, collected 18 November 2026.

Wood vs Metal Business Cards: Materials and Feel

The wood card is cherry wood with a warm, wheat-colored surface and a natural grain. The metal cards are anodized aluminum with a frosted surface and rounded corners, and the maker says the colors resist scratching from normal wear while the frosted surface stays free of fingerprints. The metal listings call the aluminum sturdy and not easy to bend. The wood listing says nothing about bend resistance, so the listings leave that comparison unclear.

Thickness and Size

Thickness is where the listings part ways most clearly. The wood card measures 1.5 mm thick, the 10-color aluminum card measures 0.45 mm thick, and the purple aluminum card measures 0.21 mm thick. The metal cards measure 86 x 54 mm, and the wood card measures 85 x 54 mm, which the wood listing describes as matching conventional business card dimensions. The metal listings state the size fits a standard wallet or purse.

The NFC Question

Only the wood card carries a chip. Its NTAG213 chip shares contact information and a social profile with compatible devices, and the maker lists digital business cards, contact sharing, social networking and NFC gifts among its uses. The metal listings describe no chip and no tap-to-share function. The metal cards are engraving blanks for patterns and text.

Engraving Each Side

The metal listings describe their cards as laser engraving blanks and say you can engrave patterns and text you want. See our wood vs metal for laser engraving guide for how wood and metal behave under a laser. The wood listing does not state laser engraving, so the listing leaves that question unclear; it describes the card as a digital contact card rather than an engraving blank.

Pack Size and Colors

Each metal pack holds 100 cards, while the wood pack holds 20 cards. The 10-color metal pack spans gold, green, blue, purple, black, silver, matte black, light gold, rose gold and red, the purple pack holds purple only, and the wood pack holds light brown cherry only.

Choose the Wood Card If

  • You want a card that shares contact details with a phone tap.
  • You like the warm look of cherry wood with a natural grain.
  • A pack of 20 cards for a small run of networking cards.

Choose a Metal Card If

  • You want an engraved card, with patterns and text on an anodized face.
  • You want a color that matches your brand.
  • You want a 100-card pack for name cards, table numbers and gift cards.
Safety

Stay with the machine while it runs, keep a fire extinguisher nearby, ventilate, and never laser PVC or vinyl. See our fume extractor guide.

Project Match

  • Tap-to-share networking cards: the OLYCRAFT wood NFC card, with its NTAG213 chip.
  • A brand-color set of engraved cards: the weparmeety 0.45mm card, in 10 colors.
  • Purple engraved cards for gifts or VIP cards: the weparmeety 0.21mm card.
  • Table number cards and name cards: either metal card, since the metal listings state those uses.

FAQ: lasers and CNC

Can you laser engrave these metal business cards?

Yes, according to the listings: the metal cards are described as laser engraving blanks for patterns and text. The listings do not state a laser type or power, so match the blank to your machine. For more on metal, see can a CO2 laser engrave metal and what wattage laser to engrave metal.

Do the metal cards share contact details with a phone tap?

Not stated. Only the wood card lists an NFC chip, an NTAG213 chip for sharing contact information with compatible devices. The metal listings describe engraving, not tap-to-share.

What size are the cards in this article?

The metal cards in this article measure 86 x 54 mm, and the wood card measures 85 x 54 mm. The metal listings state the size fits a standard wallet or purse.

How many cards come in each pack here?

Each metal pack holds 100 cards, and the wood pack holds 20 cards.

Can you laser engrave the wood NFC card?

The wood listing does not state laser engraving. It describes the card as a digital contact card with an NTAG213 chip for sharing contact information.

Related: wood vs metal for laser engraving, best metal business card blanks, stainless vs aluminum business cards and best laser engraver for wood and metal.

More buying guides