Best Flexible 3D Filament (2026): 5 Picks Compared
Five flexible TPU filaments compared by Shore hardness, diameter accuracy, spool size, print temperature and warranty, from 250g spools to a 1kg spool.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGeeetech TPU 1kg Blue9.6/10View on Amazon - 2
Best Color ChangeTECSONAR Chameleon 250g9.5/10View on Amazon - 3
Best Color RangeACESAY TPU 8-Pack9.5/10View on Amazon - 4
Best Rainbow BundleAMOLEN TPU Rainbow 4-Pack9.5/10View on Amazon - 5
Best Glow in the DarkFrucindra Glow TPU 4-Pack9.4/10View on Amazon
A phone case that bends instead of cracking, a watch band that flexes all day, and a gasket that seals under pressure all start with the same material, and the best flexible 3d filament is the TPU spool that feeds that material cleanly through the printer. This roundup compares TPU filaments by Shore hardness, diameter accuracy, spool size, print temperature and warranty term, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Geeetech TPU 1kg Blue: 1kg spool, 95A, plus or minus 0.03mm accuracy, 1-year warranty Check price on Amazon
- Best Color Change TECSONAR Chameleon 250g: Chameleon color shifts with light and angles, 95A, 250g spool Check price on Amazon
- Best Color Range ACESAY TPU 8-Pack: 8 colors, 200g per spool, 1600g total, 95A Check price on Amazon
- Best Rainbow Bundle AMOLEN TPU Rainbow 4-Pack: 4 spools of 200g in transparent multicolor rainbow Check price on Amazon
- Best Glow in the Dark Frucindra Glow TPU 4-Pack: Glows after sunlight or UV, 4 colors, 4 spools of 250g Check price on Amazon
Machines on the list

Geeetech TPU Filament 1.75mm Clear Blue
A 1kg spool of clear blue TPU filament with Shore 95A hardness, tight diameter accuracy and a 1-year manufacturer warranty.
Pros
- 1kg spool of 1.75mm TPU with Shore 95A plus or minus 2
- Diameter accuracy of plus or minus 0.03mm with CCD inspection stated
- Nozzle 180 to 210 degrees C, bed 50 to 70 degrees C and speed 20 to 40 mm/s stated
- Vacuum-sealed with desiccants and a 1-year manufacturer warranty
Cons
- Clear blue only, with no color choice in this spool
- Needs drying at 65 to 70 degrees C for 8 or more hours if exposed to humidity
- 1kg spool only, with no small bundle for trying colors
- Stated print speed tops out at 40 mm/s, below the 90 mm/s stated for the Tecsonar

Tecsonar Chameleon TPU Filament 1.75mm
A 250g spool of chameleon TPU filament that changes color with light and angles, with Shore 95A hardness and a 1-year warranty.
Pros
- Chameleon color that changes with light and angles
- 95A with 42D in parentheses and strong layer bonding stated
- Print temperature 230 to 250 degrees C, bed 30 to 60 degrees C and speed 30 to 90 mm/s stated
- 1-year warranty, with 24-hour pre-drying and vacuum-sealed packing with desiccants
Cons
- 250g spool is the smallest amount here
- Chameleon color changes with light and angles, so the finished color varies
- Needs a nozzle temperature of 230 to 250 degrees C, the highest stated here
- AMS adapter is not included; contact customer support if one is required

ACESAY TPU Filament 1.75mm, 95A TPU 3D Filament
An 8-color bundle of TPU filament with 200g spools, Shore 95A hardness and stated accuracy for flexible functional parts.
Pros
- 8 colors, 200g per spool, 1600g total
- 95A TPU at 1.75mm with plus or minus 0.03mm accuracy
- Drying guide states 70 degrees C for 7 hours after long air exposure
- Strong layer bonding and oil resistance stated, and feeds direct-drive extruders
Cons
- No warranty term is stated
- No nozzle temperature is stated
- Best fed directly through an external spool holder rather than Bambu AMS
- 200g spools hold less than the 1kg Geeetech spool

AMOLEN TPU 3D Printer Filament Bundle Transparent
A bundle of 4 rainbow TPU spools of 200g each, with stated print temperatures and vacuum-sealed packing.
Pros
- 4 spools of 200g in transparent multicolor rainbow
- Printing temperature 190 to 220 degrees C and bed 0 to 60 degrees C stated
- Layer height tip of 0.15mm stated
- Reusable sealed vacuum bags and 24/7 after-sale service
Cons
- No Shore hardness is stated
- No diameter tolerance is stated
- 200g spools hold less than the 1kg Geeetech spool
- High-speed printing is claimed but no print speed is stated

Frucindra Glow in the Dark TPU 95A 3D Printer
A bundle of 4 glow-in-the-dark TPU spools of 250g each in four colors, with Shore 95A hardness and stated accuracy.
Pros
- Glow in the dark in 4 colors: green, blue, yellow and purple
- 4 spools of 250g, 1kg total
- 95A with plus or minus 0.03mm tolerance
- Vacuum-dried with desiccant in sealed bags
Cons
- No warranty term is stated
- No nozzle temperature is stated
- Glow fades gradually over time as stated
- Glow needs bright light or UV to charge as stated
Other machines to compare
ZIRO 1.75mm TPU Filament 0.8kgCheck price on Amazon
Lotactree Black TPU Filament 1.75mm 250gCheck price on Amazon
JAYO TPU 95A 3D Printer Filament Bundle 1.75mmCheck price on Amazon
SUNLU TPU Filament 1.75mmCheck price on Amazon
OVERTURE TPU 95A Flexible 3D Printer Filament 1.75mmCheck price on Amazon
Specs compared
| Filament | HQ Score | Diameter | Hardness | Spool | Warranty |
|---|---|---|---|---|---|
| Geeetech TPU 1kg Blue | 9.6/10 | 1.75mm | 95A | 1kg | 1 year |
| TECSONAR Chameleon 250g | 9.5/10 | 1.75mm | 95A (42D) | 250g | 1 year |
| ACESAY TPU 8-Pack | 9.5/10 | 1.75mm | 95A | 8 x 200g | Not stated |
| AMOLEN TPU Rainbow 4-Pack | 9.5/10 | 1.75mm | Not stated | 4 x 200g | Not stated |
| Frucindra Glow TPU 4-Pack | 9.4/10 | 1.75mm | 95A | 4 x 250g | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (11 November 2026). Two of the five state a warranty term, and four state a Shore hardness of 95A.
What the listings tell you, and what they leave out
Four of the five state a Shore hardness of 95A; the AMOLEN bundle states none. Three state a nozzle temperature: AMOLEN at 190 to 220 degrees C, Geeetech at 180 to 210 degrees C and Tecsonar at 230 to 250 degrees C, while the Frucindra and ACESAY listings state no nozzle temperature. Two state a print speed: Geeetech at 20 to 40 mm/s and Tecsonar at 30 to 90 mm/s. Two state a warranty term, and none states a safety certification.
Three listings give drying guidance for the user. Geeetech recommends drying at 65 to 70 degrees C for 8 or more hours if the spool was exposed to humidity, ACESAY recommends drying at 70 degrees C for 7 hours after long air exposure, and AMOLEN recommends drying the filament before use and storing it sealed and dry. The Frucindra and Tecsonar listings describe vacuum-sealed packing with desiccant, and Tecsonar also states a 24-hour pre-drying process before packing.
Buying guide: choosing the best flexible 3d filament
Hardness: what the listings state
Four of the five state a Shore hardness of 95A: Geeetech at 95A with a tolerance of plus or minus 2, Frucindra at 95A, ACESAY at 95A and Tecsonar at 95A with 42D in parentheses. The AMOLEN bundle states no hardness figure, so its firmness cannot be compared with the rest on the listing alone. All five are TPU, and every listing that names uses points at flexible parts: phone cases, watch bands, insoles, RC tires, gaskets and wearable crafts.
Spool size and color choice
Spool size decides how much color choice a single order gives. The Geeetech spool holds 1kg of clear blue, the only single-color 1kg spool here. The AMOLEN bundle holds 4 spools of 200g in transparent multicolor rainbow, the Frucindra bundle holds 4 spools of 250g in green, blue, yellow and purple with a total weight of 1kg, and the ACESAY bundle holds 8 spools of 200g in 8 colors with a total of 1600g. The Tecsonar spool holds 250g of chameleon filament that changes color with light and angles. For a first flexible print, a bundle spreads the choice across colors; for a long run of one part, the 1kg Geeetech spool avoids a mid-print spool change.
Print temperature and speed
Three listings state a nozzle temperature. The Tecsonar states the highest range at 230 to 250 degrees C, the AMOLEN states 190 to 220 degrees C and the Geeetech states 180 to 210 degrees C. Bed temperatures run from 0 to 60 degrees C for AMOLEN, 50 to 70 degrees C for Geeetech and 30 to 60 degrees C for Tecsonar. Print speed is stated for two: Geeetech at 20 to 40 mm/s and Tecsonar at 30 to 90 mm/s. See our 3D printer nozzle temperature by filament type for the wider picture.
Feeding and storage
TPU is soft, so how it feeds matters. Geeetech states its filament is optimized for direct-drive extruders, and ACESAY states its filament feeds smoothly through direct-drive extruders. ACESAY also notes that flexible TPU is best fed directly through an external spool holder rather than auto-switching systems such as Bambu AMS, and Tecsonar notes that an adapter designed for Bambu Lab AMS is available through customer support. AMOLEN recommends passing the filament through the fixed hole after use to avoid tangles, and Tecsonar gives the same tip. Every spool here arrives vacuum-sealed with desiccant, and three listings give drying guidance, as covered above. See our how long to dry filament guide before a first flexible print.
Project Match
- Phone cases, watch bands and insoles: Geeetech lists phone cases, insoles and watch bands, and ACESAY lists phone cases and smartwatch bands.
- RC car tires and drone parts: ACESAY lists high-grip RC car tires and drone crash bumpers.
- Gaskets, seals and tool handles: ACESAY lists waterproof rubber gaskets, pipe seals and ergonomic power tool handles.
- Glow decor and nightlights: Frucindra lists Halloween decor, cosplay accessories and nightlights in 4 glow colors.
- Color-change display pieces: Tecsonar lists chameleon color for high-end aesthetic needs, and AMOLEN lists transparent multicolor rainbow for prints that stand out.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing. No listing here states a safety certification, so safety adds nothing to any score. Two listings state a warranty term: Geeetech at 1 year and Tecsonar at 1 year.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Geeetech TPU 1kg Blue | 9.6 | 32 | 22 | 21 | 0 | 2 |
| TECSONAR Chameleon 250g | 9.5 | 29 | 20 | 19 | 0 | 2 |
| ACESAY TPU 8-Pack | 9.5 | 30 | 21 | 22 | 0 | 0 |
| AMOLEN TPU Rainbow 4-Pack | 9.5 | 29 | 21 | 21 | 0 | 0 |
| Frucindra Glow TPU 4-Pack | 9.4 | 29 | 20 | 20 | 0 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
What is 3D pen filament made of?
The five filaments here are all TPU, short for thermoplastic polyurethane as Geeetech states it. TPU is the flexible filament in this roundup, and every spool here measures 1.75mm in diameter.
What size is 3D pen filament?
All five filaments here measure 1.75mm in diameter. The listings state 1.75mm for the AMOLEN, Geeetech, Frucindra, ACESAY and Tecsonar spools, with diameter accuracy of plus or minus 0.03mm stated for Geeetech, Frucindra and ACESAY.
Which of these filaments glows in the dark?
The Frucindra bundle glows in the dark. It comes in 4 colors, green, blue, yellow and purple, absorbs sunlight and UV light, and the maker states the glow fades gradually over time.
What nozzle temperatures do these TPU filaments state?
AMOLEN states 190 to 220 degrees C, Geeetech states 180 to 210 degrees C and Tecsonar states 230 to 250 degrees C. The Frucindra and ACESAY listings state no nozzle temperature.
How much filament is on each spool?
Geeetech holds 1kg on one spool. AMOLEN holds 4 spools of 200g, Frucindra holds 4 spools of 250g with a total weight of 1kg, ACESAY holds 8 spools of 200g with a total of 1600g, and Tecsonar holds 250g on one spool.
Related: the craft machines hub and the FDM 3D printers hub. Also see our what is the best 3D printing filament. Also see our how to change 3D printer filament. Also see our where to buy 3D filament.




