Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Where to Buy 3D Filament: A Buyer’s Guide

Where to buy 3D filament depends on the seller, the diameter and the material the printer needs, and this guide walks through each option step by step.

Where to Buy 3D Filament: A Buyer’s Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUNLU PLA 3D Printer FilamentSUNLU PLA 3D Printer Filament9.8/10View on Amazon
  2. 2SUNLU High Speed PLA Filament BundleSUNLU High Speed PLA Filament Bundle9.8/10View on Amazon
  3. 3FLASHFORGE Rapid PLA Filament 1.75mm Ruby RedFLASHFORGE Rapid PLA Filament 1.75mm Ruby Red9.8/10View on Amazon

A print finishes, the spool runs out in the middle of a project, and the next print needs filament on the shelf. Where to buy 3D filament is a question of matching the seller to the job: filament makers sell direct, printer makers sell spools made for their machines, general online stores carry many colors and materials, and local shops sell single spools for a print that cannot wait. The right seller is the one that stocks the diameter and material the printer needs, in a spool that fits, with the color the project calls for.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Below: the places that sell filament, how to match diameter and material to a printer, how much to buy, and what to check before ordering.

Where to buy 3D filament: the main options

Four kinds of seller cover almost every filament purchase, and each one suits a different situation:

  • Filament makers, direct. Buying from the maker gives that maker’s color range, bundles and the maker’s own recommended settings. SUNLU, for example, sells a bundle of 10 rolls of 1kg spools in 10 colors, aimed at buyers who print in many colors or run multi-nozzle printers.
  • Printer makers. The company that made the printer sells filament made for its machines, which takes the guesswork out of diameter and spool size.
  • General online stores. Large stores carry many brands, materials and colors in one place, which helps when comparing options side by side.
  • Local shops and maker spaces. A local shop sells single spools off the shelf, which suits a print that cannot wait for shipping and a buyer who wants to see the color in person.

Start with the filament the printer maker recommends, then branch out once the printer is dialed in. A seller that states the diameter, the material and the spool size on the listing is a better starting point, whatever the storefront looks like.

Match the filament to your printer

Three figures decide whether a spool works on a printer: the diameter, the spool size and the temperatures. Get those right before thinking about color.

Diameter. The SUNLU PLA+ listing states 1.75mm filament, suitable for almost all 1.75mm FDM 3D printers. Check the printer manual for its diameter and buy only filament that matches it. A spool of the wrong diameter will not feed properly.

Spool size. The same listing gives a spool diameter of 8.00 inches, a spool width of 2.50 inches and a hub hole diameter of 2.20 inches. Measure the printer’s spool holder against those figures, or check the manual, so the spool hangs and turns freely. A spool that is too wide for the holder will not sit on it, so check the fit before ordering.

Accuracy and temperatures. SUNLU states dimensional accuracy of plus or minus 0.02mm for its PLA+ filament, and recommends a nozzle temperature of 210 to 235 degrees Celsius (410 to 455 degrees Fahrenheit) with a bed temperature of 55 to 65 degrees Celsius (131 to 149 degrees Fahrenheit). Those figures are for that filament; other materials state their own. Read the temperatures on the listing and check them against what the printer can reach.

Pick the material and the colors

PLA is the usual starting material for FDM printing, and PLA+ is its tougher variant. SUNLU states its PLA+ is 3 times stronger than PLA, with a brighter color and better layer adhesion, and describes it as free of clogging, bubbles, tangles, warping and stringing. Those are the maker’s claims for its own filament; other makers state their own figures, so compare listings rather than assuming every PLA+ behaves the same.

Color choice is practical as well as visual. A bundle with 10 colors, such as the SUNLU bundle (on Amazon) in Black, White, Grey, Red, Klein Blue, Green, Sunny Orange, Vivid Yellow, Coffee Brown and Oak, suits a maker who prints signs, models and parts in many colors. A single-color spool suits a maker who prints one kind of part again and again. Buy the colors the next few projects need, not the colors that look good on the shelf.

Neat winding matters more than it sounds. SUNLU states its spools are neatly wound, with no knots, which keeps the filament feeding evenly. A tangled spool stops a print halfway, so a listing that states neat winding is worth more than one that says nothing about it.

How much filament to buy

A single 1kg spool is the right first buy for one project or a first print. It is enough to learn the material and the printer settings without committing to a shelf full of spools.

A bundle suits a maker who already prints regularly. The SUNLU bundle holds 10 rolls of 1kg spools, which is 10KG of filament across 10 colors, and the maker points it at multi-nozzle printer users and 3D pen users as well as buyers with many color needs. Check the color list against upcoming projects before ordering, since colors with no project behind them sit unused on the shelf.

Filament also needs dry storage. SUNLU lists a filament dryer among its products, and keeping spools dry matters because damp filament prints badly. Store spools sealed and dry between prints, and dry a spool that has sat open for a while before using it again.

Check the listing before you order

Read the listing the way a parts list is read: diameter, material, spool size, recommended temperatures and compatibility. The SUNLU listing states compatibility with almost all FDM 3D printers of other brands and names the Ender 3 and Ender 3V2 as examples. If a listing does not state the diameter or the material, move on to one that does.

Also check what is in the box. A bundle listing should state the number of rolls, the weight of each roll and the colors. The SUNLU bundle states 10 rolls of 1kg spools in 10 named colors, so the buyer knows exactly what arrives. A listing that hides the roll count or the colors is a guess, and filament is a bad thing to guess about.

Common mistakes to avoid

  • Buying the wrong diameter for the printer.
  • Ordering a spool that does not fit the spool holder.
  • Ignoring the recommended nozzle and bed temperatures.
  • Storing filament open on a shelf where it picks up moisture.
  • Buying a bundle of colors with no project in mind for them.
  • Ordering from a listing that does not state the material or the diameter.

FAQ: lasers and CNC

Where is the cheapest place to buy 3D filament?

There is no single answer, because the deal depends on the spool size, the material and the color. Compare listings by the weight of filament in the spool and the material, not by the headline alone, and check bundles against single spools for the colors actually needed. Local shops suit a single urgent spool; online makers and stores suit bundles and rare colors.

What size filament does my printer take?

Check the printer manual. The common FDM size is 1.75mm, and the SUNLU PLA+ listing states its 1.75mm filament suits almost all 1.75mm FDM 3D printers. Buy only the diameter the manual states, and check the spool dimensions against the holder as well.

How much filament does a first project need?

A single 1kg spool is the sensible first buy for one project. A maker who prints regularly or in many colors can step up to a bundle, such as 10 rolls of 1kg spools, once the printer settings are known and the colors are spoken for by real projects.

Does the brand of filament matter?

What matters is what the maker states: the diameter, the dimensional accuracy, the recommended temperatures and the winding. SUNLU states accuracy of plus or minus 0.02mm for its PLA+ filament, which is the kind of figure to compare between brands. A brand that states its figures gives the buyer something concrete to compare.

Can any filament be used in any 3D printer?

No. The diameter must match the printer, the nozzle temperature must suit the material, and the spool must fit the holder. The SUNLU PLA+ listing recommends a nozzle temperature of 210 to 235 degrees Celsius and a bed temperature of 55 to 65 degrees Celsius, which shows the temperatures the maker recommends for that filament. Check those figures against the printer manual before ordering.

Related: types of PLA filament, what is the best 3D printing filament, how long to dry filament, cost of PLA filament and the 3D printers hub.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.