Best CO2 Laser Cutter for Home Use: 5 Picks From 45W to 90W
Five CO2 laser cutters for a home shop or garage, from a 12 x 8 in desktop K40-style machine to an enclosed 80W with a 36 x 18 in bed.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallxTool P39.7/10View on Amazon - 2
Best Large Bed for the MoneyOMTech Maker 90W9.6/10View on Amazon - 3
Best DesktopOMTech K40+ 45W9.6/10View on Amazon - 4
Best Mid-SizeVEVOR 50W9.6/10View on Amazon - 5
Budget Pick With RotaryVEVOR 45W9.5/10View on Amazon
A CO2 laser cutter does what a diode cannot: it cuts clear acrylic, cuts thicker wood in fewer passes, and engraves glass. It also asks more of your home. This guide is for hobbyists and home businesses choosing a CO2 machine, and it compares five from 45W to 90W on bed size, cooling, interlocks and cut ratings, plus what each listing says about safety and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall xTool P3: 80W in a fully enclosed Class 1 body with lid interlocks, fire detection and suppression, and a 36 x 18 in bed. Check price on Amazon
- Best Large Bed for the Money OMTech Maker 90W: 90W, a 28 x 20 in bed, four-way pass-through and a water chiller in the bundle, with a cover interlock. Check price on Amazon
- Best Desktop OMTech K40+ 45W: A 45W K40-style machine with built-in air assist, door and water protection and an emergency stop. Check price on Amazon
- Best Mid-Size VEVOR 50W: 50W, a 20 x 12 in bed and pass-through doors, with a laser class statement that matches its power. Check price on Amazon
- Budget Pick With Rotary VEVOR 45W: The lowest price here, with a rotary axis in the box for cups and bottles. Check price on Amazon
Machines on the list

xTool P3 80W Flagship CO2 Laser Cutter
A fully enclosed 80W CO2 cutter with a 36 x 18 in bed, LiDAR autofocus, dual cameras and fire suppression.
Pros
- 80W tube rated to cut 20 mm wood and 25 mm acrylic
- 36 x 18 in bed, the largest here, with an auto-lift base up to 8.7 in
- Fully enclosed Class 1 design with lid interlocks and active fire detection and suppression
- LiDAR autofocus and dual HD cameras for placement
Cons
- Priced far above the other picks
- 317 lb: plan where it will live before it arrives
- Conveyor, rotary and air purifier are sold separately

OMTech Maker 90W CO2 Laser Engraver & Cutter
A 90W CO2 cutter with a 28 x 20 in bed, four-way pass-through and a bundled water chiller.
Pros
- 90W Yongli H2 tube rated for up to 8,000 hours
- 28 x 20 in bed with honeycomb and blade beds
- Water chiller included for long sessions
- Cover interlock cuts the beam when the lid opens
Cons
- No warranty term in the listing
- No ratings on this bundle yet
- 227 lb and a full-size footprint
- No camera or autofocus

OMTech K40+ 45W Desktop CO2 Laser Engraver
A desktop 45W CO2 cutter with a 12 x 8 in bed, built-in air assist, door and water protection and an emergency stop.
Pros
- 45W tube rated to cut 10 mm acrylic and 8 mm wood
- Built-in 45 degree air assist that adjusts with power
- Door and water protection, emergency stop and flame-retardant panel
- Works with LightBurn and LaserGRBL
Cons
- Small 12 x 8 in bed
- Offers 2 years of service, not a stated warranty term
- Rotary is optional, not included
- Still 81.8 lb for a desktop machine

VEVOR 50W CO2 Laser Engraver, 20 x 12
A 50W CO2 cutter with a 20 x 12 in bed, honeycomb and blade beds, and four-way pass-through.
Pros
- 20 x 12 in bed, a step up from 12 x 8 in desktop machines
- Rated up to 600 mm/s
- Honeycomb and aluminum blade beds included
- States Class 4 at 50,000 mW, which matches the tube
Cons
- No warranty term in the listing
- Only two ratings
- Conservative cut ratings: 7 mm acrylic and 5 mm wood
- 220 lb

VEVOR 45W CO2 Laser Engraver, 12 x 8
A 45W desktop CO2 cutter with a 12 x 8 in bed and a rotary axis in the box, at the lowest price here.
Pros
- Rotary axis included for cups and bottles
- Lowest price of the five picks
- Built-in air assist and a pull-out waste tray
- Works with LightBurn, GRBL, CorelDraw and AutoCAD
Cons
- Manual knob focus with a red dot, no autofocus
- States Class 1 next to 45,000 mW without naming an interlock
- Conservative cut ratings: 5 mm acrylic, 3 mm wood
- No warranty term in the listing
Other machines to compare
OMTech K40+ 45W CO2 Laser Engraver & Cutter with Rotary AxisCheck price on Amazon
xTool P2S 55W CO2 Laser CutterCheck price on Amazon
OMTech K40+ 45W CO2 Laser Engraver & Cutter with LaserCheck price on Amazon
Twotrees TTS-20 Max 20000mW Laser Engraver and Cutter MachineCheck price on Amazon
Longer New Upgrade RAY5 Laser Engraver CutterCheck price on Amazon
Specs compared
| Model | HQ Score | Tube | Work area | Rated speed | Cooling | Interlock | Pass-through | Warranty |
|---|---|---|---|---|---|---|---|---|
| xTool P3 | 9.7/10 | 80W CO2 | 36 x 18 in | 1,200 mm/s | Not stated | Lid interlocks | Conveyor sold separately | 12 months |
| OMTech Maker 90W | 9.6/10 | 90W CO2 (Yongli H2) | 28 x 20 in | 600 mm/s | Water chiller included | Cover interlock | 4-way | Not stated |
| OMTech K40+ 45W | 9.6/10 | 45W CO2 | 12 x 8 in | 300 mm/s | Water, with flow protection | Door protection | No | 2 years support (no warranty term) |
| VEVOR 50W | 9.6/10 | 50W CO2 | 20 x 12 in | 600 mm/s | Water pump | Not stated | 4-way | Not stated |
| VEVOR 45W | 9.5/10 | 45W CO2 | 12 x 8 in | 300 mm/s | Water pump | Not stated | No | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 5 October 2026.
What the CO2 listings tell you
We read 16 CO2 laser listings. Six were bundles of the same OMTech K40+ 45W machine with different accessories, so check what you are actually comparing. Only 2 of the 16 stated a warranty term, and one listed its warranty as “None”.
Laser class statements need reading in context. Eight OMTech listings state Class 2 at 0.827 or 0.874 mW. On an enclosed machine with interlocks, the class describes the light that can reach you from outside with the lid closed, not the tube’s power. The tube itself is a Class 4 laser, and the class only holds while the interlock works.
Buying guide: a CO2 laser at home
Bed size and pass-through
The 12 x 8 in bed on K40-style machines fits coasters, tags and small signs. A 20 x 12 in bed handles most crafts, and 28 x 20 in or larger takes sheet goods. Pass-through doors let you feed longer boards through the machine in sections.
Cooling
CO2 tubes are water cooled. A simple pump in a bucket works for short jobs; a chiller holds the water temperature during long sessions, which helps the tube last. The OMTech Maker 90W bundle includes one.
Ventilation
Every CO2 machine here vents smoke through an exhaust fan and duct. Plan a route to a window or wall vent before you buy, or budget for a fume extractor. Cutting acrylic and plywood produces strong fumes.
Space and power
Even the desktop K40-style machines weigh 64 to 82 lb, and the larger ones 220 to 317 lb. Check doorways, floor strength and that the circuit can carry the machine plus its chiller and exhaust.
CO2 or diode
If you mainly engrave wood and leather and cut thin plywood, a diode is cheaper and simpler. If you need clear acrylic, thicker cuts or glass engraving, CO2 is the tool. Our Machine Finder helps you decide, and the acrylic material notes explain why.
CO2 lasers emit invisible infrared light at 10,600 nm. Keep the lid closed and never defeat an interlock, keep a fire extinguisher next to the machine, and never leave a cut running unattended, since acrylic and wood can catch fire. Never cut PVC or vinyl. If your machine has no working interlock, wear glasses rated with an optical density for 10,600 nm. See the FDA guidance on laser products.
How the scores add up
Each machine is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| xTool P3 | 9.7 | 34 | 24 | 16 | 9 | 2 |
| OMTech Maker 90W | 9.6 | 33 | 22 | 20 | 6 | 0 |
| OMTech K40+ 45W | 9.6 | 28 | 22 | 22 | 6 | 1 |
| VEVOR 50W | 9.6 | 30 | 21 | 20 | 4 | 0 |
| VEVOR 45W | 9.5 | 27 | 20 | 21 | 2 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
Can I use a CO2 laser cutter at home?
Yes, with ventilation to the outside, a fire extinguisher, steady water cooling and a lid interlock that works. Enclosed machines with interlocks, like the xTool P3, are designed for indoor use.
Can a CO2 laser cut metal?
No. The CO2 machines here engrave coated metal only. For bare metal see our metal laser guide.
How long does a CO2 laser tube last?
Listings here rate tubes from 3,500 hours (VEVOR) to 8,000 hours (OMTech Maker 90W). Running at lower power settings extends tube life, according to OMTech.
Do I need a water chiller?
Not for short jobs on a small machine, where a pump and reservoir work. For long sessions and larger tubes a chiller keeps the water at a stable temperature.
What does Class 2 mean on a CO2 laser listing?
On an enclosed machine it describes the light reachable from outside with the lid closed and interlocks working. The tube inside is still a Class 4 laser.
Related: diode vs CO2 laser, best enclosed laser engraver, best laser engraver for small business, best laser engraver under ,000, best laser engraver for wood, the CO2 laser hub and the Machine Finder. Also see our xtool p3 review. Also see our how to align mirrors on a co2 laser. Also see our 60w vs 80w co2 laser. Also see our pass through slot vs removable bottom laser. Also see our flying optics vs moving material laser cutter.




