eSUN Matte PLA vs ELEGOO Matte PLA: Which One Should You Buy?
eSUN matte PLA vs ELEGOO matte PLA, compared from the two ELEGOO listings in hand: a Beige 1KG spool and a Matte White 4KG bundle.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ELEGOO Matte PLA Filament Matte White 4KG9.6/10View on Amazon - 2
ELEGOO Matte PLA Filament Beige 1KG9.6/10View on Amazon
A matte finish hides layer lines and gives a printed part a soft, flat look, and ELEGOO matte PLA promises it. This esun matte pla vs elegoo matte pla comparison works from the listings in hand: both are ELEGOO matte PLA, one a single spool in beige and the other a bundle in matte white, and no eSUN matte PLA listing is in the data, so the eSUN side is not scored here. The two ELEGOO listings are the same filament in different colours and pack sizes, and the comparison below shows what separates them.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: the ELEGOO Matte PLA White 4KG bundle is the stronger pick here, with the same stated diameter and finish as the Beige 1KG spool, 4 spools in one purchase and a spec table that matches its title. The Beige 1KG spool is the pick if you want a single spool in beige, but its spec table weight does not match its title. No eSUN matte PLA listing is in the data, so the eSUN side is not scored here.
Machines on the list

ELEGOO Matte PLA Filament Matte White 4KG
A 4 kg bundle of ELEGOO matte PLA in matte white, four 1 kg cardboard spools of 1.75 mm filament with a stated accuracy of +/- 0.02 mm and a matte, low-gloss finish.
Pros
- 4 spools of 1 kg in one purchase, for 4 kg in total
- Matte, low-gloss, smooth finish with nearly invisible layer lines
- 1.75 mm diameter with a stated accuracy of +/- 0.02 mm
- Neatly wound to prevent tangles and feeding issues
Cons
- No warranty term is stated
- No print temperature or print speed is stated
- Only matte white is offered in this bundle
- Keep the door open on an enclosed printer

ELEGOO Matte PLA Filament Beige 1KG
A single 1 kg spool of ELEGOO matte PLA in beige, 1.75 mm filament with a stated accuracy of +/- 0.02 mm and a matte, low-gloss finish.
Pros
- Matte, low-gloss, smooth finish with nearly invisible layer lines
- 1.75 mm diameter with a stated accuracy of +/- 0.02 mm
- Neatly wound to prevent tangles and feeding issues
- Single 1 kg spool, a small commitment for one colour
Cons
- No warranty term is stated
- No print temperature or print speed is stated
- Keep the door open on an enclosed printer
Other machines to compare
ELEGOO Matte PLA 3D Printer Filament Matte Black 1KG 1.75mmCheck price on Amazon
ELEGOO Matte PLA 3D Printer Filament Black & White 4KG 1.75mmCheck price on Amazon
ELEGOO Matte PLA Filament Matte White 1KGCheck price on Amazon
eSUN PLA+ Filament 1.75mmCheck price on Amazon
ELEGOO Matte PLA 3D Printer Filament 1.75mm Bundle 4KGCheck price on Amazon
eSUN PLA Basic Filament 1.75mm GreenCheck price on Amazon
eSUN Matte PLA vs ELEGOO Matte PLA Side by Side
| Spec | eSUN matte PLA | ELEGOO Matte PLA White 4KG | ELEGOO Matte PLA Beige 1KG |
|---|---|---|---|
| HQ Score | Not stated | 59 | 57 |
| Filament | Not stated | Matte PLA | Matte PLA |
| Diameter | Not stated | 1.75 mm, +/- 0.02 mm | 1.75 mm, +/- 0.02 mm |
| Colour | Not stated | Matte White | Beige |
| Pack size | Not stated | 4 kg, 4 x 1 kg spools | 1 kg, single spool |
| Spool | Not stated | Cardboard, 2.2 lbs each | Cardboard, 2.2 lbs |
| Finish | Not stated | Matte, low gloss, smooth | Matte, low gloss, smooth |
| Enclosed printer | Not stated | Keep the door open | Keep the door open |
| Warranty | Not stated | Not stated | Not stated |
| Weight | Not stated | 4 kg | 1 kg |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.
Filament and finish
Both listings are ELEGOO matte PLA in 1.75 mm diameter with a stated accuracy of +/- 0.02 mm, and both promise the same matte, low-gloss, smooth finish with nearly invisible layer lines. The filament is the same on both sides of this comparison; what changes is the colour and the pack. Neither listing states a print temperature or a print speed, so those are not compared here.
Pack size and colour
The Beige listing is a single 1 kg spool in beige, stated as 2.2 lbs. The Matte White listing is a bundle of 4 spools, each 1 kg, for 4 kg in total, in matte white. The bundle suits a maker who prints often and wants several spools on hand; the single spool suits a maker who wants one colour for one project. Both use a cardboard spool.
Winding and feeding
Both listings state the same winding and feeding claims: each spool is neatly wound to prevent tangles and feeding issues, and the filament is made in a dry and dust-free environment and packed in a vacuum sealed package, away from dampness or air, so the maker states no clogging and no bubbling problems. Neither listing states a different winding or feeding claim, so there is nothing to separate the two here.
Compatibility and enclosed printers
Both listings state universal compatibility with the common 1.75 mm FDM 3D printers. Both carry the same note for enclosed printers: if you use an enclosed printer, keep the door open when printing ELEGOO matte PLA. Neither listing states a printer model that is excluded, so the compatibility claim is the same for both.
Weight and the spec table
The Beige listing disagrees with its own spec table on weight, and the disagreement is worth noting. The Beige 1KG title states 1 kg, stated as 2.2 lbs, but its spec table lists an item weight of 2.54 pounds, which does not match 1 kg. The Matte White 4KG title states 4 kg as 4 spools of 1 kg, and its spec table lists 8.82 pounds, which matches 4 kg. The comparison follows the titles over the spec tables, so it uses 1 kg for the Beige spool and 4 kg for the White bundle.
Support and warranty
Neither listing states a warranty term, so both have no warranty in the comparison. Neither listing states a support contact or a service promise.
Choose the ELEGOO Matte PLA White 4KG if
- You want several spools on hand for a run of prints.
- You want matte white filament.
- You want the listing whose spec table matches its title.
Choose the ELEGOO Matte PLA Beige 1KG if
- You want a single spool in beige.
- You want to try the filament before buying more.
- You print in beige and do not need a bundle.
For more filament options, see best bulk PLA filament and Anycubic PLA vs ELEGOO PLA.
Project Match
Pair the filament with the project, using only what each listing states.
- Matte display models and parts where layer lines should stay hidden: either listing, both state the same matte, low-gloss finish with nearly invisible layer lines.
- A print run that needs more than one spool: the Matte White 4KG bundle, with 4 spools of 1 kg in one purchase.
- A single print in beige: the Beige 1KG spool.
- A single print in matte white: the Matte White 4KG bundle.
Print temperature, print speed and bed temperature are not stated in either listing.
FAQ: lasers and CNC
What is the difference between the Beige 1KG spool and the Matte White 4KG bundle?
The filament is the same: both are ELEGOO matte PLA in 1.75 mm diameter with a stated accuracy of +/- 0.02 mm and the same matte, low-gloss finish. The difference is colour and pack size: the Beige listing is a single 1 kg spool in beige, and the Matte White listing is a bundle of 4 spools of 1 kg in matte white.
Can ELEGOO matte PLA be used in an enclosed printer?
Yes, with the door open. Both listings state that if you use an enclosed printer, you should keep the door open when printing ELEGOO matte PLA.
What diameter is ELEGOO matte PLA?
Both listings state 1.75 mm diameter with an accuracy of +/- 0.02 mm.
Does ELEGOO matte PLA hide layer lines?
The listings state a matte, low-gloss and smooth finish that gives a printed object with nearly invisible layer lines.
Is eSUN matte PLA the same as ELEGOO matte PLA?
This article cannot say. Both listings here are ELEGOO matte PLA, so the eSUN side has no listing to compare against on stated specs.
Related: best bulk PLA filament and Anycubic PLA vs ELEGOO PLA.




