Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Elegoo Mercury Plus vs Anycubic Wash and Cure Plus: Which to Buy?

Two wash and cure station lines for resin 3D printers, compared on wash size, curing lights, cleaning modes, timer and safety.

Elegoo Mercury Plus vs Anycubic Wash and Cure Plus: Which to Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ELEGOO Mercury Plus 2.0 Large Wash and CureELEGOO Mercury Plus 2.0 Large Wash and Cure9.6/10View on Amazon
  2. 2ANYCUBIC Wash & Cure Plus 3.0ANYCUBIC Wash & Cure Plus 3.09.5/10View on Amazon
  3. 3ELEGOO Mercury Plus 3.0 Larger Wash and CureELEGOO Mercury Plus 3.0 Larger Wash and Cure9.5/10View on Amazon
  4. 4ANYCUBIC Wash and Cure Station 3.0ANYCUBIC Wash and Cure Station 3.09.4/10View on Amazon

A fresh resin print comes off the build plate sticky with uncured resin, and it needs a wash and a cure before it can be handled bare-handed, painted or sold. This elegoo mercury plus vs anycubic wash and cure plus comparison puts two wash and cure station lines side by side, using what each listing states about wash size, curing lights, cleaning modes, timer and safety.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: Choose the ELEGOO Mercury Plus 2.0 if you want the stated UV protection and auto-suspend on a sealed wash. Choose the ANYCUBIC Wash and Cure Plus 3.0 if you want the largest stated bucket and a 12-month warranty. The ELEGOO Mercury Plus 3.0 lists a 7.5L cleaning capacity, and the ANYCUBIC Wash and Cure 3.0 suits smaller printers.

Machines on the list

ELEGOO Mercury Plus 2.0 Large Wash and Cure

ELEGOO Mercury Plus 2.0 Large Wash and Cure

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-in-1 wash and cure station with 8+8 405 nm lamp beads, a 360-degree rotating turntable and a sealed 180x150x206mm washing container.

Pros

  • 8+8 405 nm lamp beads, 360-degree turntable
  • Anti-UV hood blocks up to 99.95% of 405 nm UV
  • Curing suspends when the cover is lifted
  • Two cleaning modes: basket or suspension washing

Cons

  • No curing size is stated
  • No clear warranty term is stated
  • No timer range is stated
ANYCUBIC Wash & Cure Plus 3.0

ANYCUBIC Wash & Cure Plus 3.0

ANYCUBIC9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A wash and cure station with a 7.6L basket, a 12L bucket, Flexicure gooseneck lights and a 1 to 30 minute timer.

Pros

  • 7.6L washing basket, 12L bucket total
  • Flexicure gooseneck lights for delicate areas
  • Two platform heights, 150 mm and 250 mm
  • 12-month warranty stated

Cons

  • No curing size is stated
  • No UV hood rating is stated
  • No auto-suspend feature is stated
  • 20% uniformity gain is measured against the older Plus
ELEGOO Mercury Plus 3.0 Larger Wash and Cure

ELEGOO Mercury Plus 3.0 Larger Wash and Cure

ELEGOO9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A larger 2-in-1 wash and cure station with a 7.5L cleaning capacity, a 230*135*260mm wash size and a 250 mm diameter by 290 mm high curing size.

Pros

  • Wash size of 230*135*260mm, up to 7.5L
  • Curing size of 250 mm diameter by 290 mm high
  • 24 405 nm LEDs with a reflective mirror design
  • 360-degree rotating turntable, bottom light source

Cons

  • No UV hood rating is stated
  • No auto-suspend feature is stated
  • No clear warranty term is stated
  • No timer range is stated
ANYCUBIC Wash and Cure Station 3.0

ANYCUBIC Wash and Cure Station 3.0

ANYCUBIC9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact wash and cure station with a 3L basket, a 4L bucket, Flexicure gooseneck lights and a 1 to 30 minute timer.

Pros

  • Flexicure gooseneck lights for small parts and model tops
  • Dual-layer basket, two platform heights
  • Curing uniformity up 20% over the 2.0
  • Timer adjusts from 1 to 30 minutes

Cons

  • 3L basket, smaller than the larger stations' stated baskets
  • Fits resin printers 7.3 in or less only
  • No curing size is stated
  • No warranty term is stated

Other machines to compare

Side by side

Spec ELEGOO Mercury Plus 2.0 ANYCUBIC Wash Cure Plus 3.0 ELEGOO Mercury Plus 3.0 ANYCUBIC Wash Cure 3.0
HQ Score 70 67 62 55
Cleaning size 180x150x206mm sealed container 8.97 x 5.03 x 10.23 in, 7.6L basket 230*135*260mm, up to 7.5L 165 x 100 x 180 mm, 3L basket
Curing size Not stated Not stated 250 mm diameter by 290 mm high Not stated
Curing lights 8+8 405 nm beads, 360-degree turntable Lens source, Flexicure gooseneck 24 405 nm LEDs, mirror design, turntable Lens source, Flexicure gooseneck
Cleaning modes Basket or suspension, adjustable bracket Platform mode, 150 mm and 250 mm Basket or hanging, adjustable bracket Platform mode, 100 mm and 165 mm
Timer Not stated 1 to 30 minutes Not stated 1 to 30 minutes
UV safety 99.95% UV block; auto-suspend Not stated Not stated Not stated
Warranty No clear term stated 12 months No clear term stated Not stated
Fits printers Most LCD/DLP/SLA, Mars series LCD printers 10.6 in and below Resin printers up to 10 in Resin printers 7.3 in or less

These numbers come straight from each maker’s listing and are rated, not measured by us (5 November 2026).

Elegoo Mercury Plus vs Anycubic Wash and Cure Plus: Wash Size and Capacity

The Mercury Plus 3.0 lists a maximum cleaning size of 230*135*260mm and a cleaning capacity of up to 7.5L. The Mercury Plus 2.0 lists a sealed 180x150x206mm container and no basket volume. The Anycubic Wash and Cure Plus 3.0 lists a cleaning volume of 8.97 x 5.03 x 10.23 in, a 7.6L basket and a 12L bucket. The Station 3.0 lists a washing size of 165 x 100 x 180 mm, a 3L basket and a 4L bucket.

Curing lights and turntable

The Mercury Plus 3.0 lists 24 405 nm LEDs with a reflective mirror design, a 360-degree rotating turntable and a bottom light source, for a maximum curing size of 250 mm diameter by 290 mm high. The Mercury Plus 2.0 lists double-row 405 nm lamp beads, 8+8, with a 360-degree rotating turntable, and no curing size. Both Anycubic stations list a lens light source with Flexicure gooseneck lights that add 30,000uW/cm² over a 1-3 cm range, for delicate areas and small parts. Neither Anycubic listing states a curing size.

Cleaning modes and timer

Both Elegoo stations support basket washing and hanging the print platform on an adjustable bracket. Both Anycubic stations use a platform mode with two heights: 150 mm and 250 mm on the Plus 3.0, for platforms from 6.6 in to 10.3 in, and 100 mm and 165 mm on the Station 3.0, for platforms from 5.9 in to 7.3 in. The Plus 3.0 lists cleaning and curing time of 1 to 30 minutes, and the Station 3.0 lists cure time of 1 to 30 minutes with a rotary knob. The Mercury Plus 2.0 lists touch-sensitive buttons and a large LED screen; neither Elegoo listing states a timer range.

Safety: UV hood and auto-suspend

Only the Mercury Plus 2.0 states UV safety features. Its anti-UV hood blocks up to 99.95% of ultraviolet rays at 405 nm, curing suspends automatically when the cover is lifted, and sealed cleaning stops splashing liquid from leaking. The other 3 listings state no UV hood rating, no auto-suspend feature and no safety certification.

Choose the Elegoo Mercury Plus side if

  • You want a sealed wash with stated UV protection
  • You want a 7.5L capacity and a stated curing size
  • You want two cleaning modes with a hanging bracket

Choose the Anycubic Wash and Cure side if

  • You want Flexicure lights for delicate areas and small parts
  • You want a timer that adjusts from 1 to 30 minutes
  • You want a 12L bucket and a 12-month warranty
Safety

UV light needs respect while a print is curing: the Mercury Plus 2.0 hood blocks up to 99.95% of 405 nm UV, and its curing suspends when the cover is lifted.

Project Match

  • Large prints from a Saturn 4 Ultra: the Mercury Plus 3.0, with a stated curing size of 250 mm diameter by 290 mm high.
  • Delicate figures with fine tops: either Anycubic station, with Flexicure gooseneck lights.
  • Small printers of 7.3 inches or less: the Anycubic Wash and Cure 3.0.

FAQ: lasers and CNC

Which wash and cure station has the largest wash size?

The Mercury Plus 3.0 lists 230*135*260mm and up to 7.5L. The Anycubic Wash and Cure Plus 3.0 lists 8.97 x 5.03 x 10.23 in with a 7.6L basket. The listings use different units, so compare the figures in the same unit before choosing.

Do these stations wash and cure in one machine?

Yes. All 4 listings describe 2-in-1 stations that wash a resin print and then cure it.

What is the Flexicure gooseneck light for?

The Flexicure gooseneck lights on both Anycubic stations add 30,000uW/cm² over a 1-3 cm range, for delicate areas and small parts.

How long can a wash or cure cycle run?

The Anycubic Wash and Cure Plus 3.0 states cleaning and curing time of 1 to 30 minutes. The Station 3.0 states cure time of 1 to 30 minutes, and no wash time is stated. Neither Elegoo listing states a timer range.

Which station has a stated warranty?

The Anycubic Wash and Cure Plus 3.0 states a 12-month warranty. The other 3 listings state no clear warranty term.

Related: wash and cure station vs UV curing lamp, best entry level resin printer, Elegoo Saturn vs Anycubic Photon Mono, 3D printer resin vs filament cost and resin vs PLA for miniatures.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.

3D Printer Accessories ·

How to Fix a Clogged Nozzle 3D Printer

Clear a clogged printer nozzle by heating it, using a sized cleaning needle, cleaning feed parts and checking extrusion before the next print.