What Is a PEI Build Plate and How to Choose One
What a PEI build plate is, how its textured coating grips the first layer, and how to pick the right size and surface for your printer.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Official Creality K1C Build Plate 235x235mm9.6/10View on Amazon - 2
BIQU PyroGrip Double Side Textured PEI Build Plate9.5/10View on Amazon - 3
FLASHFORGE Adventurer 5M /Pro /AD5X Upgrade Double9.5/10View on Amazon - 4
TIOPY A1mini Double Sided Textured PEI Build Plate9.4/10View on Amazon
A print that sticks through the first layers and pops off when cool starts with the surface it prints on, and what is a pei build plate is the question every new printer owner asks sooner or later. A PEI build plate is a flexible spring steel sheet with a PEI coating that grips the first layer while the bed is hot, and releases the print when the plate cools and bends. The sections below explain the coating, the sizes and the textures.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Plates differ by printer: the BIQU plate (on Amazon) fits 257x257mm Bambu Lab beds, the TIOPY plate (on Amazon) fits the 184x184mm A1 Mini, and the Creality plate (on Amazon) fits 235x235mm printers.

Official Creality K1C Build Plate 235x235mm
A 235x235mm textured PEI plate in spring steel with a nozzle cleaner strip, for the K1C and other 235x235mm printers.
Pros
- 235x235mm textured PEI with a nozzle cleaner strip
- Fits K1, K1C, K1 SE and Ender 3 models
- Works with PLA, ABS, ASA, PETG, TPU, PC and PA
- Magnetic fixation with positioning slots
Cons
- No warranty term is stated
- Textured surface only, no smooth side stated
- Nozzle cleaner strip suits the K1C first
- Fits only 235x235mm beds

BIQU PyroGrip Double Side Textured PEI Build Plate
A double-sided textured PEI plate at 257x257mm in spring steel, for Bambu Lab P1P, P1S, P2S, X2D, X1C, X1E and A1.
Pros
- Double-sided textured PEI
- 257x257mm for Bambu Lab P1, P2, X1, X2D and A1
- Bend the plate and prints pop up
- Flame retardant with high temperature resistance
Cons
- Fits only the listed Bambu Lab models
- Textured surface only, no smooth side stated
- P2S and X2D need build plate detection closed
- No size option besides 257x257mm

FLASHFORGE Adventurer 5M /Pro /AD5X Upgrade Double
A double-sided PEI platform for the Adventurer 5M, 5M Pro and AD5X, with powder-coated, smooth PEI and smooth PC options.
Pros
- 3 platform options: powder-coated, smooth PEI and smooth PC
- Smooth PEI needs no glue for PLA, PETG and TPU
- Smooth PC suits ABS, PC and ASA at high temperatures
- Models separate after cooling, with no tools
Cons
- No plate size is stated
- Powder-coated plates may need glue for certain filaments
- Bending is necessary to remove models from a PC platform
- 3 surfaces to choose from, so matching filament takes care

TIOPY A1mini Double Sided Textured PEI Build Plate
A double-sided PEI plate at 184x184mm for the Bambu Lab A1 Mini, with a smooth golden PEI side and a textured side.
Pros
- A smooth golden PEI side and a textured side
- 184x184mm for a secure fit on the A1 Mini bed
- Strong first-layer adhesion for PLA, ABS, PETG, TPU and PC
- Prints release when cooled, with no tools or scrapers
Cons
- No warranty term is stated
- 184x184mm fits the A1 Mini only
- Needs isopropyl alcohol to clean for repeated use
- No smooth PC option for ABS, PC and ASA at high temperatures
What a PEI build plate is
A PEI build plate is a spring steel sheet with a PEI coating on the print surface, set on the heated bed. The coating grips the first layer while the bed is hot, which cuts warping, and the print releases when the plate cools. Bend the plate a little and the print pops up. The BIQU plate is double-sided textured PEI, the TIOPY plate pairs a smooth golden PEI side with a textured side, and the Creality plate is textured PEI in high-strength spring steel.
Pick the right size
Match the plate to the bed. The BIQU plate is 257x257mm for Bambu Lab P1P, P1S, P2S, X2D, X1C, X1E and A1 printers. The TIOPY plate is 184x184mm for the Bambu Lab A1 Mini. The Creality plate is 235x235mm for the K1C, K1, K1 SE and Ender 3 models. The FLASHFORGE listing states no plate size, so match it by printer model.
Textured or smooth?
The surface sets the bottom finish. A textured surface gives the bottom of the print a distinctive textured touch, as on the BIQU and Creality plates. A smooth PEI surface gives a flawless bottom finish, as on the FLASHFORGE smooth PEI platform, and the TIOPY smooth golden PEI side gives a glossy bottom. The FLASHFORGE powder-coated platform gives a textured finish of its own.
Match the filament
Match the surface to the filament. The FLASHFORGE smooth PEI platform gives excellent adhesion for PLA, PETG and TPU without glue, while its powder-coated platform may need glue for certain filaments. Its smooth PC platform suits ABS, PC and ASA at high temperatures with strong adhesion. The TIOPY coating covers PLA, ABS, PETG, TPU, PC and more, and the Creality plate covers PLA, ABS, ASA, PETG, TPU, PC and PA. See the best build plate for ABS picks for more on high-temperature plates.
What is a pei build plate: the gear
The plates below cover the sizes in this guide: Creality for 235x235mm beds, BIQU for 257x257mm Bambu Lab beds, FLASHFORGE for the Adventurer 5M family, and TIOPY for the A1 Mini.
Common mistakes to avoid
- Ordering a plate that does not match the bed size.
- Using a powder-coated plate for filaments that need glue, without glue.
- Scraping prints off instead of cooling the plate and bending it.
- Running P2S or X2D prints with build plate detection left on.
What is a pei build plate: the short version
- Measure the bed and pick a matching plate size.
- Pick textured for grip or smooth for a glossy bottom.
- Match the surface to the filament.
- Set the plate on the heated bed and print.
- Cool the plate, bend it, and lift the print off.
FAQ: lasers and CNC
What is a PEI build plate?
A PEI build plate is a flexible spring steel sheet with a PEI coating that grips the first layer while the bed is hot and releases the print when the plate cools and bends.
How do you remove a print from a PEI plate?
Cool the plate first, then bend it and the print pops up. The BIQU plate releases this way, the TIOPY prints release cleanly when cooled, and the FLASHFORGE models separate after cooling to room temperature, though the PC platform also needs bending.
What size PEI build plate do I need?
Match the bed size. The BIQU plate is 257x257mm, the TIOPY plate is 184x184mm for the A1 Mini, and the Creality plate is 235x235mm. The FLASHFORGE listing states no plate size, so match it by printer model: Adventurer 5M, Adventurer 5M Pro and AD5X.
Does a PEI plate need glue?
Not always. The FLASHFORGE smooth PEI platform needs no glue for PLA, PETG and TPU, and its smooth PC platform needs no glue for most materials. Its powder-coated platform may need glue for certain filaments.
Related: the 3D printers hub, best build plate for ABS, do 3D printers come with filament and how to change a 3D printer nozzle.




