Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Can You Cut Acrylic With a Laser Cutter?

Yes, acrylic sheets cut cleanly with a laser, and this guide shows which sheets to pick, how to keep the cut clean and what to watch.

Can You Cut Acrylic With a Laser Cutter?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KAITELA Pack of 10 Colored Cast Acrylic Sheet 12"KAITELA Pack of 10 Colored Cast Acrylic Sheet 12"9.5/10View on Amazon
  2. 21/8 Thick 10 x 10 inch Acrylic Sheets1/8 Thick 10 x 10 inch Acrylic Sheets9.4/10View on Amazon
  3. 3Colored Mirror Acrylic Sheet SetColored Mirror Acrylic Sheet Set9.4/10View on Amazon
  4. 412PCS 1/8 Thick Colorful Acrylic Sheet for Laser12PCS 1/8 Thick Colorful Acrylic Sheet for Laser9.4/10View on Amazon

Can you cut acrylic with a laser cutter? Yes, and acrylic is among the friendliest sheet materials for laser work. Makers use it for signs, keychains, ornaments, cake toppers and stand-up displays, and every sheet in this guide cuts with a laser, while the KAITELA, Gdhwxcl and Deylixay sheets (on Amazon) also list a table saw, a jigsaw and a band saw. The rest of this guide covers which acrylic to pick, how to keep the cut clean and what to watch.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

KAITELA Pack of 10 Colored Cast Acrylic Sheet 12"

KAITELA Pack of 10 Colored Cast Acrylic Sheet 12"

KAITELA9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of opaque cast acrylic sheets in 10 colors, 12 x 12 in and 1/8 in thick, listed for laser cutting, engraving and CO2 laser work.

Pros

  • Cast acrylic sheets cut by laser with clean edges and no chips
  • 10 colors in the pack, from orange to black and white
  • 12 x 12 in sheets suit signs, keychains and name tags
  • Weatherproof and UV-resistant, for indoor and outdoor projects

Cons

  • No warranty term is stated
  • Opaque sheets only, so no clear acrylic in this pack
  • Protective paper comes off both sides before use
  • 10 fixed colors, so you cannot pick a single color
1/8 Thick 10 x 10 inch Acrylic Sheets

1/8 Thick 10 x 10 inch Acrylic Sheets

Gdhwxcl9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of orange acrylic sheets, 10 x 10 in and 1/8 in thick, listed to cut cleanly with a laser and leave smooth edges.

Pros

  • Cuts cleanly with a laser, leaving smooth edges and minimal residue
  • 10 x 10 in size suits cake toppers, stands and photo frames
  • Suits outdoor signs, and will not crack or lose color
  • Recyclable material, durable and lightweight

Cons

  • Orange is the only color in this pack
  • 4 sheets in the pack, so bigger projects need more packs
  • No protective film is stated
  • No acrylic type is stated
Colored Mirror Acrylic Sheet Set

Colored Mirror Acrylic Sheet Set

SAKRNIC9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of colored mirror acrylic sheets, 8 x 8 in, with a reflective mirror finish and gray backing, listed for CO2 laser cutting.

Pros

  • Mirror finish on one side with gray backing, for reflective projects
  • 10 colors in the set, one of each color
  • Cuts, engraves or bends with CO2 laser cutters or hand tools
  • Shatterproof, lightweight and durable alternative to glass mirrors

Cons

  • Mirror finish limits it to decorative work
  • 8 x 8 in sheets suit small projects
  • Gray backing shows on the reverse side
  • No thickness is stated beyond the 8 x 8 in size
12PCS 1/8 Thick Colorful Acrylic Sheet for Laser

12PCS 1/8 Thick Colorful Acrylic Sheet for Laser

Deylixay9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Colorful assorted acrylic sheets, 8 x 8 in and 1/8 in thick, listed for laser cutting, engraving, badges and UV printed signs.

Pros

  • Cuts by laser, table saw, jigsaw, drill, router or band saw
  • Assorted colors suit badges, signs and crafts
  • Recyclable material, lightweight and shatter-resistant
  • 8 x 8 in size suits small signs and craft projects

Cons

  • No warranty term is stated
  • Assorted colors only, so a single color cannot be picked
  • No color list is stated, only assorted
  • No acrylic type is stated

Can You Cut Acrylic With a Laser Cutter?

Yes. Every sheet in this guide lists laser cutting among its cutting methods, and the listings describe clean edges with minimal residue, and clean edges with no chips. Cast acrylic earns a special mention: the KAITELA listing describes its cast sheets as cutting cleanly with no chips and no melting point when laser cutting or engraving. Keep the protective paper on the sheet while you cut, then peel it after, for a clean surface.

The KAITELA, Gdhwxcl and Deylixay sheets are 1/8 in thick, and the KAITELA sheet (on Amazon) is also listed as 3mm nominal. The SAKRNIC mirror (on Amazon) set states no thickness. A thin sheet like this suits signs, keychains, ornaments and cake toppers. If your project needs a thicker sheet, these listings state no thicker size, so check the listing you buy.

Which Laser Handles Acrylic

The listings name laser cutting in general, and the KAITELA and SAKRNIC listings name CO2 laser cutting in particular. If you already own a machine, match the sheet to the laser type its listing names. Our laser engraver types guide compares diode, CO2 and fiber machines.

How to Get a Clean Cut

Cut a sample piece from an offcut before the full sheet. Leave the protective paper on during the cut, then peel it from both sides after. Edges can be polished after cutting; our how to polish acrylic after laser cutting guide shows the steps.

Cut with ventilation that moves fumes outdoors, and stay with the machine while it runs. Keep a suitable extinguisher within reach. Never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS.

Acrylic Sheets for Laser Cutting

Each sheet below handles a different part of the job, from size and color range to mirror finish and cast quality, so match the sheet to your project.

FAQ: lasers and CNC

What thickness of acrylic can a laser cutter cut?

The KAITELA, Gdhwxcl and Deylixay sheets are 1/8 in thick, and the KAITELA sheet is also listed as 3mm nominal. The SAKRNIC mirror set states no thickness. Thicker sheets are not stated here, so check the listing for the sheet you buy.

Does laser cutting acrylic leave smooth edges?

The Gdhwxcl listing states the sheets cut cleanly with a laser, leaving smooth edges and minimal residue, and the KAITELA listing states clean edges with no chips. Keep the protective paper on during the cut for a clean surface.

Can you cut mirror acrylic with a laser cutter?

The SAKRNIC listing states its colored mirror acrylic sheets can be cut, engraved or bent with CO2 laser cutters or hand tools. The set holds 10 pieces in 10 colors, each 8 x 8 in.

Should I remove the protective paper before laser cutting acrylic?

The KAITELA listing recommends keeping the protective paper on the sheet when laser cutting, then removing the paper from both sides of the finished piece. Peel it after the cut for a clean surface.

Related: the engraving materials hub, can a CO2 laser engrave metal and CO2 laser engraver for beginners.

More buying guides