Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Milling Machines for Makers

Types of milling machines for makers: benchtop mill drills, mini mills and CNC mills, and the spindle speed, travel, table size and weight that separate them.

Types of Milling Machines for Makers
On this page

A bracket for the drill press table, a small aluminum plate with a neat row of holes, and a model part that has to fit: that is the work a benchtop mill takes on. Types of milling machines differ by size, power and control: a benchtop mill drill handles metal, wood and plastic on a bench, a mini mill handles small hobby parts at high spindle speed, and a CNC mill runs programmed toolpaths. The sections below walk through each type and the numbers that separate them.

As an Amazon Associate I earn from qualifying purchases. LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

This guide gives no prices, because the listings carry no price data. Compare spindle speed, travel, table size and weight, and build a shortlist from those figures. Some listings disagree with themselves, and each one is flagged below.

Step 1: Start with the part, not the machine

Start with the part, not the machine. Good starting work is brackets, small plates, model parts, drilled holes in a neat row and slots in soft metal or plastic. Pick the part where the size and the material are already known.

Ask this first: how big is the part, and which material does it need? A benchtop mill drill covers metal, wood and plastic, and a mini mill covers wood, soft metal and plastic at small scale. The CNC routers hub shows the router side of the choice.

Step 2: The types at a glance

Type Example listings What sets it apart
Benchtop mill drill INTBUYING RCOG-25V, MechMaxx VM18L, Yokoma 1 HP to 1.5HP motors, R8 spindle, tilting head
Mini milling machine XENDOLL W104MA, ZHRUI 36W 24W and 36W motors, motor speeds up to 20,000 RPM, benchtop hobby size
CNC mill None listed here Programmed toolpaths; no listing here states CNC control

The table uses the listing figures: read each row on its own, because the types serve different jobs.

Step 3: Read the numbers that matter

The figures that separate the listings are spindle speed, travel, table size and weight. Spindle speed runs from 50 to 2250 RPM on the INTBUYING and Yokoma mill drills and from 0 to 2500 RPM on the MechMaxx VM18L. The ZHRUI mini mill (on Amazon) lists a motor speed up to 20,000 RPM, and the XENDOLL lists a 20000 RPM motor with a 3000 RPM spindle speed. Travel on the Yokoma runs X 18.9 inches, Y 6.9 inches and Z 11 inches, and the MechMaxx VM18L lists X 8-5/8 inches, Y 6-5/16 inches and Z 10-27/32 inches. Table size runs 27.5 by 7.1 inches on the INTBUYING and Yokoma machines and 6 by 20 inches on the MechMaxx VM18L. Weight runs from 6 lbs on the XENDOLL to 400.0 lbs on the INTBUYING RCOG-25V.

Motor power runs from 24W on the XENDOLL to 1100W on the INTBUYING and Yokoma machines, with 1 HP on the MechMaxx VM18L and 1.5HP on the INTBUYING RCOG-25V. The MechMaxx VM18L lists a 3/4 inch drilling capacity and a 2 inch face milling capacity, and the INTBUYING and Yokoma machines list a 0.9 inch maximum drilling diameter.

Step 4: Check the head tilt, the spindle and the contradictions

The head tilt sets the angles the machine can cut. The INTBUYING RCOG-25V and the Yokoma tilt to ±90°, and the MechMaxx VM18L tilts to ±60°. The spindle taper matters for tooling: the INTBUYING, MechMaxx and Yokoma machines use an R8 spindle, and the INTBUYING machines add ER32 chucks.

Some listings disagree with themselves. The XENDOLL lists a 20000 RPM motor and a 3000 RPM spindle speed in the same bullets: those are different speeds, so compare the spindle speed when you compare machines. The MechMaxx VM18LD title states a ±90° head tilt while its bullets state ±60° and describe the VM18L by name, so the bullets were copied from the VM18L listing and the tilt figure is unsettled.

Step 5: Set up the workspace and the first job

Weight decides the bench. The XENDOLL weighs 6 lbs and the ZHRUI is a compact benchtop machine, while the MechMaxx VM18L weighs 180 lbs and the INTBUYING RCOG-25V weighs 400.0 lbs. The INTBUYING and Yokoma machines run on 110V, and the XENDOLL runs on AC100V to 240V. The INTBUYING RCOG-25V and the Yokoma state overload and overheat protection, the Yokoma adds a one-key start and stop switch with forward and reverse control, and the XENDOLL ships with safety glasses. The MechMaxx VM18L spec table states a one-year warranty; the VM18LD spec table states no warranty term.

Common mistakes to avoid

  • Comparing a motor speed with a spindle speed.
  • Buying for the table size and forgetting the weight.
  • Trusting a copied bullet block: the VM18LD bullets describe the VM18L.
  • Assuming every benchtop mill is CNC: no listing here states CNC control.
  • Skipping the spindle taper check before ordering tooling.

Types of milling machines: the short version

  1. Pick the part and the material first.
  2. Choose a benchtop mill drill for metal, wood and plastic, or a mini mill for small hobby parts.
  3. Compare spindle speed, travel, table size and weight listing by listing.
  4. Check the head tilt, the R8 spindle and the chuck set.
  5. Set the machine on a bench that holds its weight, and check the power supply.

Everything after that is repetition: keep notes on each job and add one project at a time.

FAQ: lasers and CNC

What is the difference between a mill drill and a mini milling machine?

A mill drill is a benchtop machine that drills and mills with a larger table and a heavier build: the listings here show 1 HP to 1.5HP motors and tables of 27.5 by 7.1 inches and 6 by 20 inches. A mini mill is smaller and lighter: the XENDOLL weighs 6 lbs with a 24W motor, and the ZHRUI lists a 36W motor.

What does R8 mean on a milling machine?

R8 is the spindle taper the listings state on the INTBUYING, MechMaxx and Yokoma machines. It sets which tooling fits, and the INTBUYING machines add ER32 chucks.

How fast does a benchtop mill spindle spin?

From 50 to 2250 RPM on the INTBUYING and Yokoma machines, and from 0 to 2500 RPM on the MechMaxx VM18L. The mini mills list motor speeds up to 20,000 RPM, and the XENDOLL lists a 3000 RPM spindle speed.

Can a benchtop mill cut metal?

The listings state metal, wood and plastic for the mill drills, and wood, soft metal and plastic for the XENDOLL mini mill, with aluminum and copper on the ZHRUI. Match the material to the listing, and check the drilling and face milling capacities the MechMaxx lists.

Do I need CNC to mill parts?

No. The machines in these listings are manual mill drills with handwheel control, a 3-axis DRO on the INTBUYING RCOG-25V and power feed on its X axis. No listing here states CNC control.

How heavy is a benchtop milling machine?

From 6 lbs on the XENDOLL to 400.0 lbs on the INTBUYING RCOG-25V, with the MechMaxx VM18L at 180 lbs. Check the bench before the machine arrives.

Related: the types of milling machines hub, low cost milling machines for hobby shops, manual vertical milling machines, types of CNC machines and CNC milling machine parts.

More buying guides

CNC Routers ·

CNC Milling Machine Setup for Beginners

A beginner guide to CNC milling machine setup: square the vise, indicate the fixed jaw, set the work stop, clamp the part and check…