Manual Vertical Milling Machine: Buyer’s Guide
A step-by-step guide to choosing a manual vertical milling machine: table size, spindle speed, head tilt and setup for a small shop.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CNCTOPBAOS 3 Axis GRBL CNC Offline Controller Board Remote9.4/10View on Amazon - 2
HUAREW Vertical Limit Switch 3D Printer Switch Mechanical9.4/10View on Amazon - 3
6050 CNC Router Machine9.6/10View on Amazon
A manual vertical milling machine is a machine tool with a vertical spindle that cuts metal, wood and plastic while the operator moves the table by hand. The cutter spins above the workpiece, and handwheels move the table along the X and Y axes while the head moves along the Z axis, so each cut follows the layout. Shops use it for drilling holes, milling flat surfaces, cutting slots and shaping small parts. This guide explains how a manual vertical milling machine works, what to compare before buying, and how to set one up in a small shop.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Listings sometimes disagree with their own spec tables. This guide uses the figures the title and bullets state.
Step 1: What a manual vertical milling machine is
The spindle points down, and the cutter mounts in the spindle taper. Common tapers in the listings are R8 and MT2. The operator raises and lowers the head, locks the axes that should stay still, and feeds the work into the cutter by hand.
A drill press only bores straight down, while a mill also moves the work sideways under the cutter, which is what makes slots, pockets and flat faces possible. For repeated parts cut by computer control, the CNC vs milling machine comparison explains the split.
Step 2: Match the table and travel to the work
Table size limits the workpiece that fits on the machine, and travel sets how far the cutter can move across it. The Jet JMD-18 lists a 9-1/2 inch by 32-1/4 inch table with 20-1/2 inch table travel and a 400 lb table capacity. The MechMaxx VM18L (on Amazon) lists a 6 inch by 20 inch table with X travel of 8-5/8 inch, Y travel of 6-5/16 inch and Z travel of 10-27/32 inch. The MechMaxx VM25LD (on Amazon) lists a 7 inch by 27-1/2 inch table, and the INTBUYING RCOG-16V lists a 5-1/2 inch by 20 inch table.
Compare the travel figures with the longest part planned for the machine, not the table size alone. Spindle-to-table distance matters as well: the Jet lists 17-1/2 inch with 5 inch spindle travel, while the VM25LD lists 14-1/2 inch, also given as 370 mm.
Step 3: Compare spindle speed, power and taper
Spindle speed and power affect which materials the machine handles and how fast it cuts. The Jet JMD-18 (on Amazon) uses a 2HP motor with 12 belt-driven speeds from 150 to 3,000 RPM. The listing states it is not electronic variable speed. The INTBUYING RCOG-25V uses a 1.5HP brushless motor with variable speed from 50 to 2250 RPM, and the MechMaxx VM18L and VM25LD use 1 HP and 1.5 HP DC brushless motors with variable speed from 0 to 2500 RPM.
The INTBUYING RCOG-16V lists a 600W brushless spindle drive with variable speed from 50 to 2250 RPM, while the XENDOLL mini mills list 24W and 36W motors with a 20,000 RPM motor speed and a 3,000 RPM spindle speed. The ZHRUI and AcmeFlare mini mills state a 20,000 RPM motor speed but do not state a spindle speed.
The Jet drills to 1-1/4 inch, face-mills to 3 inch and end-mills to 3/4 inch. The VM18L lists a 3/4 inch drilling capacity, also given as 18 mm, and a 2 inch face milling capacity, also given as 50 mm. The R8 taper appears on the Jet, the VM18L, the VM25LD and the RCOG-25V, while the RCOG-16V lists MT2 in the title and R8 in the bullets, so confirm the taper before ordering collets. The 1/4 vs 3/8 inch end mill guide helps with cutter size once the taper is known.
Step 4: Check head tilt and spindle travel
A tilting head cuts angles without repositioning the workpiece. The VM18L head tilts to 60 degrees in either direction, and the VM25LD and the RCOG-25V heads tilt to 90 degrees in either direction. The Jet head swivels 360 degrees, and the RCOG-16V head tilts up to 90 degrees.
The RCOG-16V lists a micro-feed function with accuracy up to 0.01 mm. The XENDOLL mini mills list a 0.1 mm handle scale, and the AcmeFlare mini mills list 0.02 mm scaled handwheels. The RCOG-25V adds a 3-axis DRO with zero clear and power failure memory.
Step 5: Read the listing like a checklist
Check the spec table against the title and bullets. The RCOG-16V title and spec table state MT2, while the bullets state R8 and R8-ER32 chucks, so confirm the taper with the seller. The Jet spec table lists product dimensions of 10.0 inches by 10.0 inches by 10.0 inches, which does not match the table in the bullets, so trust the bullets for the table size.
Check what ships in the box. The Jet lists a worklamp, drill chuck, carbide facemill, 3-1/2 inch angle vise and a drawbar, with a 2-year warranty. The VM18L lists a 1-year warranty service. The ZHRUI mini mill (on Amazon) ships with a milling cutter set, and the XENDOLL kits include safety glasses, tools and a power adapter rated AC100V-240V. Listings that state no warranty term should be read as no warranty term stated.
Step 6: Plan the bench, weight and power
Weight decides the bench and the move. The Jet ships crated at about 660 lb, and the listing advises planning a hoist and helpers. The RCOG-25V lists an item weight of 400 lb. The RCOG-16V lists 215.0 lb, and the VM18L lists 180 lb, also given as 82 kg. The XENDOLL mini mills list 6 lb.
The Jet bench-mounts or fits the optional JET CS-18 cabinet stand, sold separately. The Jet lists 115/230V single phase, prewired for 115V, with a UL-listed motor, and the INTBUYING machines list 110V. Check the outlet and the circuit before the machine arrives.
Step 7: Set up safely and make the first cuts
Set the machine on a level bench and check that the head and table move freely before powering on. The VM25LD lists a chip guard, rubber chip guards and a built-in safety switch. The Jet lists a drill chuck guard and a worklamp. Wear eye protection; a face shield adds protection from chips, see the face shield guide for options.
Clamp the workpiece firmly in the vise and take a light pass on scrap material to confirm the setup. Use an edge finder to locate the workpiece edges; see the 1/2 inch edge finder guide. Clear chips with a brush and switch the machine off before changing tooling.
Common mistakes to avoid
- Buying the smallest table, then finding the workpiece does not fit.
- Comparing motor speed with spindle speed as if they were the same figure.
- Ordering collets in the wrong taper.
- Trusting the spec table when the title and bullets say something else.
- Skipping the bench, hoist and power plan for a heavy machine.
Manual vertical milling machine: the short version
- Match the table and travel to the work.
- Match spindle speed and power to the material.
- Confirm the taper before ordering tooling.
- Check head tilt, spindle travel and included accessories.
- Plan the bench, weight and power supply.
- Set up guards and eye protection before the first cut.
FAQ: lasers and CNC
What is a manual vertical milling machine?
It is a machine tool with a vertical spindle that the operator controls by hand. Handwheels move the table along the X and Y axes while the cutter spins, and the head moves along the Z axis, drilling holes, milling flat surfaces and cutting slots in metal, wood and plastic.
What materials can a manual vertical milling machine cut?
The listings state metal, wood and plastic. The RCOG-16V lists stainless steel, iron, aluminum, copper, wood and nylon. The mini mills list wood, soft metal, plastic, aluminum, copper and acrylic.
How much table travel is needed?
The Jet lists 20-1/2 inch table travel, while the VM18L lists X travel of 8-5/8 inch, Y travel of 6-5/16 inch and Z travel of 10-27/32 inch.
Which spindle taper fits these machines?
R8 is the taper listed on the Jet, the VM18L, the VM25LD and the RCOG-25V. The RCOG-16V lists MT2 in the title and R8 in the bullets, so confirm the taper with the seller before ordering collets.
Does a benchtop mill need a stand?
The Jet bench-mounts or fits the optional JET CS-18 cabinet stand, sold separately, and ships crated at about 660 lb. The RCOG-25V lists 400 lb, the RCOG-16V lists 215.0 lb and the VM18L lists 180 lb, while the XENDOLL mini mills list 6 lb.
Can a manual vertical milling machine drill holes as well as mill?
Yes. The Jet is listed for drilling and light milling, and it drills to 1-1/4 inch, face-mills to 3 inch and end-mills to 3/4 inch. The VM18L lists a 3/4 inch drilling capacity and a 2 inch face milling capacity.
Related: the CNC vs milling machine comparison, what a CNC router machine is, best CNC machine for home shop and the 1/2 inch edge finder guide.




