Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Sovol Sv08 vs Anycubic Kobra 3: Which One Should You Buy?

A CoreXY printer with a 700mm/s top speed and a 350x350x345mm build volume, compared with a replacement printhead assembly for the Anycubic Kobra 3.

Sovol Sv08 vs Anycubic Kobra 3: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sovol SV08 CoreXY 3D PrinterSovol SV08 CoreXY 3D Printer9.6/10View on Amazon
  2. 2Anycubic Printhead Assembly 3D Printer AccessoryAnycubic Printhead Assembly 3D Printer Accessory9.4/10View on Amazon

A 3D printer earns its bench space by turning ideas into parts you can hold, and the right one depends on what you plan to print. This comparison of sovol sv08 vs anycubic kobra 3 looks at the two listings side by side: a CoreXY printer on one side and a replacement printhead on the other, so you can see what each listing actually sells.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: Pick the Sovol SV08 if you want a complete, fast CoreXY printer with a stated 700mm/s top speed and a 350x350x345mm build volume. Pick the Anycubic printhead only if you already own a Kobra 3 and need a replacement printhead that installs in a few minutes. The two listings are not the same kind of product, so compare them as a printer against a spare part.

Machines on the list

Sovol SV08 CoreXY 3D Printer

Sovol SV08 CoreXY 3D Printer

Sovol9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A CoreXY 3D printer based on Voron 2.4 with a 700mm/s top speed, a 350x350x345mm build volume, Klipper firmware, quad-gantry leveling and a camera.

Pros

  • 700mm/s top speed with 40000mm/s² acceleration
  • 350x350x345mm build volume, 13.8x13.8x13.6in
  • Quad-gantry leveling with 4 independent Z motors
  • Klipper firmware with input shaping and pressure advance

Cons

  • No enclosure is stated in the listing
  • 39.0 pounds and 21.0 x 21.7 x 22.6 in, a large footprint
  • No nozzle size stated
  • Camera resolution is not stated
Anycubic Printhead Assembly 3D Printer Accessory

Anycubic Printhead Assembly 3D Printer Accessory

ANYCUBIC9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A replacement printhead assembly for the Anycubic Kobra 3, Kobra 3 Combo, Kobra 3 V2 and Kobra 3 V2 Combo, made to install in a few minutes.

Pros

  • Fits the Kobra 3, Kobra 3 Combo, Kobra 3 V2 and Kobra 3 V2 Combo
  • Original accessory, made to match the printer
  • Installs in a few minutes with videos provided
  • After-sale service offered by the seller

Cons

  • A spare part, not a printer: no print speed or build volume stated
  • Not compatible with the Kobra 3 Max
  • No warranty term stated
  • No nozzle size stated; no specific material is named

Other machines to compare

Side by side

Spec Sovol SV08 Kobra 3 Printhead Notes
HQ Score 69 54 Sovol leads on stated specs
What it is CoreXY 3D printer Replacement printhead assembly Only the Sovol listing is a complete printer
Top speed 700mm/s Not stated No speed stated for the printhead
Build volume 350x350x345mm, 13.8×13.8×13.6in Not stated No volume stated for the printhead
Hotend 300°C ceramic heating block Not stated No hotend figure stated for the printhead
Leveling Quad-gantry, 4 independent Z motors Not stated No leveling stated for the printhead
Firmware Klipper, open source Not stated No firmware stated for the printhead
Camera Included Not stated No camera stated for the printhead
Weight 39.0 pounds 1.1 pounds Printer vs spare part
Warranty 1 Year Manufacturer Not stated Only the Sovol listing states a term

Size and performance figures are the brand’s ratings quoted from listings on 6 November 2026.

sovol sv08 vs anycubic kobra 3: what each listing sells

The Sovol listing sells a complete CoreXY printer based on Voron 2.4. The Anycubic listing sells a printhead assembly, a spare part for the Kobra 3 family. That difference shapes the whole comparison: the Sovol side states speed, volume, hotend and firmware, while the Kobra 3 side states fit, installation and after-sale service.

Speed and build volume

The SV08 states a 700mm/s top speed with 40000mm/s² acceleration and a 350x350x345mm build volume, or 13.8×13.8×13.6in. The printhead listing states no speed and no build volume, since it is a part, not a printer. Do not read printer performance into the Kobra 3 side: the listing gives no figures for it.

Leveling and firmware

The SV08 levels with quad-gantry leveling and 4 independent Z motors, plus a pressure sensor that sets the nozzle distance from the build plate. It runs Klipper firmware with input shaping, pressure advance and PID tuning, and OrcaSlicer is the open-source slicer the listing describes. The printhead listing states no leveling and no firmware.

Hotend and heating

The SV08 uses a ceramic heating block that reaches 300°C, with 220°C in 40 seconds, and the listing says the ceramic block and AC heated bed together cut heating time by 70%. The printhead listing states no hotend temperature and no bed temperature.

Choose the Sovol SV08 if

  • You want a complete printer with a stated 700mm/s top speed.
  • You want a 350x350x345mm build volume for large parts.
  • You like open-source hardware with Klipper and OrcaSlicer.

Choose the Anycubic printhead if

  • You already own a Kobra 3, Kobra 3 Combo, Kobra 3 V2 or Kobra 3 V2 Combo.
  • You need a replacement printhead that installs in a few minutes.
  • You do not own a Kobra 3 Max, which this part does not fit.

For more printers, see best quiet 3D printer for home.

Safety

The SV08 hotend reaches 300°C. Keep hands clear of the nozzle and bed while printing, let parts cool before handling, ventilate the room, and stay with the machine while it runs.

Project Match

  • Large functional parts: the SV08, with a 350x350x345mm build volume.
  • Fast prototypes: the SV08, with a stated 700mm/s top speed.
  • Kobra 3 repairs: the Anycubic printhead, made for the Kobra 3 family.
  • Open-source tinkering: the SV08, based on Voron 2.4 with Klipper and OrcaSlicer.
  • Materials: no specific material is named on either listing.

FAQ: lasers and CNC

Is the Anycubic Kobra 3 listing a printer?

No. The listing sells a printhead assembly, a replacement part for the Kobra 3 family. It is not a printer and states no speed or build volume.

How fast is the Sovol SV08?

The listing states a 700mm/s top speed with 40000mm/s² acceleration.

What is the SV08 build volume?

350x350x345mm, or 13.8×13.8×13.6in, as stated in the listing.

Does the printhead fit the Kobra 3 Max?

No. The listing says it is not compatible with the Kobra 3 Max.

What warranty does the SV08 carry?

The listing states a 1 Year Manufacturer warranty. The printhead listing states no warranty term.

Related: Anycubic Kobra S1 vs Creality K2 Se, best PLA filament for 3D printers, 3D printer resin vs filament cost and best 3D printer enclosure for Ender 3.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.