Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Sovol SV08 vs Elegoo Centauri Carbon: Which One Should You Buy?

Sovol SV08 vs Elegoo Centauri Carbon compared through their accessories: chamber heat and enclosure on the Sovol side, carbon fiber filament and a PEI plate on the Elegoo side.

Sovol SV08 vs Elegoo Centauri Carbon: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sovol Metal and Tempered Glass Open EnclosureSovol Metal and Tempered Glass Open Enclosure9.6/10View on Amazon
  2. 2ELEGOO Carbon Fiber PLA 3D Printer Filament 1.75mmELEGOO Carbon Fiber PLA 3D Printer Filament 1.75mm9.5/10View on Amazon
  3. 3PEI Build Plate for Elegoo CentauriPEI Build Plate for Elegoo Centauri9.4/10View on Amazon
  4. 4Sovol Chamber Heating Module for Sovol SV08 MAXSovol Chamber Heating Module for Sovol SV08 MAX9.3/10View on Amazon

A maker who sells functional prints knows the printer is only part of the story. The enclosure that keeps chamber heat in, the filament that carries the load, and the plate that keeps the base layer down decide whether a part comes out straight or warped. This comparison looks at sovol sv08 vs elegoo centauri carbon through the accessories each side lists on Amazon, and names who should pick which side.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: the Sovol SV08 side wins on heat control, with a chamber heating module and a metal and tempered glass enclosure that holds in the module’s heat and blocks fumes. The Elegoo Centauri Carbon side wins on the print itself, with carbon fiber PLA filament and a double sided PEI plate that grips hard and releases clean. Pick Sovol accessories for high-temperature materials in a shared room; pick Elegoo accessories for strong functional parts.

Machines on the list

Sovol Metal and Tempered Glass Open Enclosure

Sovol Metal and Tempered Glass Open Enclosure

Sovol9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A metal and tempered glass enclosure for the Sovol SV08 Max that holds in chamber heat, blocks fumes and cuts noise.

Pros

  • Blocks 99% of toxic fumes and keeps airflow clean, per the listing
  • Holds a stable high temperature with the heating module for performance materials
  • Soundproof design reduces operating noise
  • Assembles in 15 minutes

Cons

  • Cannot print 500mm height prints with the enclosure installed
  • No warranty term stated
  • Fits the SV08 Max only, not other printers
ELEGOO Carbon Fiber PLA 3D Printer Filament 1.75mm

ELEGOO Carbon Fiber PLA 3D Printer Filament 1.75mm

ELEGOO9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Carbon fiber reinforced PLA in 1.75mm with accuracy of +/- 0.02mm, sold as a 1kg spool for strong functional parts.

Pros

  • Carbon fiber reinforcement for strong, rigid functional parts
  • Accuracy of +/- 0.02mm at 1.75mm diameter
  • Vacuum-sealed and fully dried before packaging to prevent clogs and bubbles
  • Fits most common 1.75mm FDM 3D printers

Cons

  • Listing recommends a hardened steel nozzle, which is an extra part
  • No print temperature stated in the listing
  • No warranty term stated
  • 1kg spool only; no larger spool size stated
PEI Build Plate for Elegoo Centauri

PEI Build Plate for Elegoo Centauri

UniTak3D9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A double sided PEI build plate sized 260x271mm for the Elegoo Centauri Carbon, with a textured grip side and a smooth finish side.

Pros

  • Double sided: textured PEI for grip, smooth PEI for a polished base
  • Textured side resists 300℃ and smooth side 200℃
  • Custom sized at 260x271mm for the Centauri Carbon and Centauri Carbon 2
  • Works with PLA, ABS, ASA, PETG, TPU, Nylon, PA and PC

Cons

  • Listing gives two sizes, 260x271mm and 265x271mm, so check your platform
  • Smooth side needs glue for filaments other than PLA
  • Must re-level the plate when switching sides
  • No warranty term stated
Sovol Chamber Heating Module for Sovol SV08 MAX

Sovol Chamber Heating Module for Sovol SV08 MAX

Sovol9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An auxiliary heating module for the Sovol SV08 MAX that holds a stable chamber temperature for high-temperature materials.

Pros

  • Auxiliary heating for high-temperature materials
  • Insulation baffle module included in the package
  • Aims for stable chamber temperature and smoother, more consistent results
  • Fits the Sovol SV08 MAX

Cons

  • No temperature figure stated in the listing
  • Listing warns of electric shock risk during wiring and burn risk from hot metal parts
  • No dimensions or power figure stated
  • No warranty term stated

Other machines to compare

Side by side

Spec Sovol SV08 side Elegoo Centauri Carbon side Notes
Heating Chamber Heating Module for high-temperature materials No chamber heater in the picks; PEI plate textured side resists 300℃ Sovol side adds heat; Elegoo side states plate limits
Enclosure Metal and tempered glass enclosure; blocks 99% of toxic fumes No enclosure in the picks Sovol side only
Filament No filament in the picks Carbon Fiber PLA, 1.75mm, +/- 0.02mm, 1kg spool Elegoo side only
Build surface No build plate in the picks PEI build plate, 260x271mm, double sided smooth and textured Elegoo side only
Print height limit Enclosure blocks 500mm height prints Not stated in the picks Sovol side only
Assembly Enclosure assembles in 15 minutes Not stated in the picks Sovol side only
Dimensions Enclosure: 27.95 x 27.56 x 29.53 inches Build plate: 260x271mm Each figure belongs to its own listing
Warranty Not stated in the picks Not stated in the picks Neither side states a term

Size and performance figures are the brand’s ratings quoted from listings on 6 November 2026.

Sovol SV08 vs Elegoo Centauri Carbon: heat and materials

Each side attacks a different end of the same job. Sovol lists a chamber heating module and a metal and tempered glass enclosure for the SV08 Max: the module adds heat and the enclosure holds it in, so performance materials print in a stable, high-temperature chamber. Elegoo lists carbon fiber PLA filament and a PEI build plate for the Centauri Carbon, both aimed at the print itself: stronger layers and a base layer that stays put.

Neither side lists a printer in this set, so this comparison stays with what the listings state. The Sovol enclosure states its size and its fume blocking; the Elegoo filament states its diameter and accuracy; the build plate states its heat limits. Where a listing stays silent, this article says so rather than filling the gap.

Enclosure and fume control

The Sovol enclosure is built from metal and tempered glass and made for the SV08 Max. With the heating module installed, the listing says it holds a high-temperature environment for better results with performance materials, and it blocks 99% of toxic fumes while keeping airflow clean. It also cuts operating noise, which matters in a shared room, and the listing says it assembles in 15 minutes.

A clear limit is plain in the listing: you cannot print 500mm height prints with the enclosure installed, and Sovol offers a height-increasing file for that case. The title also calls it an open enclosure while the bullets call it sealed, so the listing contradicts itself on this point; the fume blocking claim comes from the bullets. The Elegoo side lists no enclosure, so fume control on that side is not stated here.

Filament and build surface

The Elegoo side is about the material that leaves the nozzle. ELEGOO PLA-CF is carbon fiber reinforced PLA in 1.75mm diameter with accuracy of +/- 0.02mm, sold as a 1kg spool, and the listing says it prints strong, rigid, impact-resistant functional parts with tightly bonded layers. It comes fully dried and vacuum-sealed to keep moisture out, and the listing recommends a hardened steel nozzle for it.

The UniTak3D PEI plate is the matching build surface for the Centauri Carbon and Centauri Carbon 2, sized 260x271mm, with a textured side for grip and a smooth side for a polished base. The textured side resists 300℃ and the smooth side 200℃, and the plate works with PLA, ABS, ASA, PETG, TPU, Nylon, PA and PC. Note the listing also says it fits platforms of 265x271mm, a slightly different size, so measure before ordering. The Sovol side lists no filament or build plate, so material choice on that side is not stated here.

Choose the Sovol SV08 side if

  • You print high-temperature materials and want chamber heat plus an enclosure to hold it.
  • Fume blocking and a quieter room matter to you.
  • You run a Sovol SV08 Max and want accessories made for it.

Choose the Elegoo Centauri Carbon side if

  • You print functional parts and want carbon fiber reinforced PLA.
  • You want a double sided PEI plate with a textured grip side and a smooth finish side.
  • You print with PLA, ABS, ASA, PETG, TPU, Nylon, PA or PC and want a plate that covers all of them.

For more printer comparisons, see Sovol SV08 vs Anycubic Kobra 3 and Elegoo Centauri Carbon vs Creality K2 Se.

Safety

Power off the machine completely before connecting the chamber heating module, and do not touch its metal parts while it runs; the listing warns of electric shock and burn risk. Ventilate the room when printing, keep the enclosure intact while printing, and never print PVC or vinyl.

Project Match

Match the project to the pick it suits:

  • High-temperature functional parts: Sovol SV08 Heat Module with the Sovol SV08 Enclosure, for stable chamber heat.
  • Strong brackets, mounts and load-bearing parts: ELEGOO PLA-CF Filament, carbon fiber reinforced for rigidity.
  • Warp-prone prints that need grip: UniTak3D PEI Plate, textured side for adhesion.
  • Parts that need a polished base: UniTak3D PEI Plate, smooth side for a clean finish.
  • Shared-room printing with fume and noise concerns: Sovol SV08 Enclosure, which blocks fumes and cuts noise.

FAQ: lasers and CNC

Can the Sovol SV08 Max enclosure fit a 500mm tall print?

No. The listing says you cannot print 500mm height prints with the enclosure installed, and Sovol offers a height-increasing file on request.

Does ELEGOO carbon fiber PLA need a special nozzle?

The listing recommends printing it with a hardened steel nozzle.

What temperatures can the PEI build plate handle?

The textured PEI side resists 300℃ and the smooth PEI side resists 200℃, per the listing.

Is the Sovol chamber heating module safe to install?

The listing says to power off the machine completely before connecting any wires, and not to touch the metal parts on its surface while the module runs.

Which side suits high-temperature materials?

The Sovol side adds chamber heat, and its enclosure holds that heat in once the heating module is installed, while the Elegoo side states a build plate that resists 300℃ on its textured side. Each side addresses heat from a different end of the print.

Related: best 3D printer enclosure for Ender 3, best PETG filament for durable prints, Elegoo Centauri Carbon vs Ender 3 V3 and Sovol SV08 vs Anycubic Kobra 3.

More buying guides