What Is PLA Silk? A Guide to Glossy Filament
PLA silk is a PLA filament that prints with a glossy, silky shine for art and decor, with no polishing needed.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SUNLU Silk Pla Plus Filament 4kg Bundle9.7/10View on Amazon - 2
SUNLU 3D Printer Silk Filament,Shiny Silk PLA9.6/10View on Amazon - 3
SUNLU Silk PLA+ Filament 1.75mm9.6/10View on Amazon - 4
ANYCUBIC Christmas Silk PLA Bundle 4KG9.5/10View on Amazon
PLA silk is the filament to reach for when a print should shine. What is PLA silk? It is a PLA filament made to print with a glossy, smooth silky surface, so art pieces, decorative models and display prints come off the printer with a sheen that plain PLA does not have, and with no polishing step after printing.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

SUNLU Silk Pla Plus Filament 4kg Bundle
A 4-pack of silk PLA+ in black, silver, red copper and brass, with a 1 year manufacturer warranty.
Pros
- Nozzle 200-230°C, bed 60-80°C and speed 30-60mm/s all stated
- 4 colours in one bundle: black, silver, red copper and brass
- Dimensional accuracy of ±0.02mm for 1.75mm filament
- 1 year manufacturer warranty
Cons
- 4 spools to store and keep dry once opened
- 4 colours only: black, silver, red copper and brass
- A glossy finish, so it does not suit a buyer who wants a matte look
- No white spool in the bundle, so a white print needs a separate spool

SUNLU 3D Printer Silk Filament,Shiny Silk PLA
A 1 kg spool of silk white PLA with a glossy finish and a stated tolerance of ±0.02mm.
Pros
- Glossy, smooth silky surface with no polishing needed
- Nozzle 205-215°C, bed 60-80°C and speed 30-60mm/s stated
- Tolerance of ±0.02mm and 330m on the spool
- Vacuum sealed with a desiccant pack, with no bubbles and low warping
Cons
- No warranty term is stated
- Silk white only, so other colours need a separate spool
- Spool diameter of 203.2mm needs a holder that fits it
- A glossy finish, so it does not suit a buyer who wants a matte look

SUNLU Silk PLA+ Filament 1.75mm
A 1 kg spool of red silk PLA+ with a chrome-like gloss finish and a reusable spool.
Pros
- Chrome-like gloss finish straight from the printer, no post-processing
- Nozzle 205-215°C, bed 60-80°C and speed 30-60mm/s stated
- Slower speeds enhance the silky finish
- Reusable spool, compatible with Bambu Lab, ELEGOO and MarsWork refill filament
Cons
- No warranty term is stated
- Red only, so other colours need a separate spool
- Slower speeds enhance the silky finish, so a glossier finish takes more print time
- A glossy finish, so it does not suit a buyer who wants a matte look

ANYCUBIC Christmas Silk PLA Bundle 4KG
A 4-colour Christmas bundle of silk PLA in green, white, gold and red, in a gift-ready box.
Pros
- 4 Christmas colours: green, white, gold and red
- 1 kg reusable spool per colour
- Gift-ready Christmas box, no extra wrapping needed
- Shiny gold with a metallic sheen for star tree toppers, bells and gift bows
Cons
- Christmas colours only, so everyday prints need another spool
- 4 spools to store once the gift box is open
- A glossy finish, so it does not suit a buyer who wants a matte look
- A Christmas box and palette, so it suits the holiday season rather than year-round printing
What is PLA silk?
PLA silk is a variety of PLA filament with a glossy, silky finish built into the material. The SUNLU listings describe a smooth, shiny surface, and the white spool adds that it needs no polishing, while the red silk PLA+ listing adds that the gloss comes straight from the printer with no post-processing. The finish is the point: the listings pitch silk PLA for art and craft, decorative pieces and display prints, where the look of the surface matters.
The filament is 1.75mm in diameter, with a stated tolerance of ±0.02mm on the SUNLU spools. The listings describe smooth feeding without clogging the nozzle, and the white spool lists 330m of filament on a 1 kg spool. The difference from regular PLA is the surface: a glossy, smooth silky finish that needs no polishing.
How to print PLA silk
The SUNLU spools state their settings, and they agree on most of them. The white silk PLA and the red silk PLA+ both list a nozzle of 205-215°C, a bed of 60-80°C and a speed of 30-60mm/s. The SUNLU 4-pack lists a wider nozzle range of 200-230°C with the same bed of 60-80°C and speed of 30-60mm/s. Slower speeds enhance the silky finish, according to the red spool, so a slower pass within the stated 30-60mm/s range brings out more of the finish.
The ANYCUBIC Christmas bundle (on Amazon) states no nozzle, bed or speed settings. The white and red SUNLU spools arrive vacuum sealed with a desiccant pack, and the SUNLU listings describe neat winding that avoids knots and reduces tangling during printing.
What to print with PLA silk
Silk PLA suits prints made to be looked at. The listings point to art and craft, artistic models and decorative pieces, and the ANYCUBIC bundle is built for Christmas decorations: stockings, candy canes, tree ornaments, wreath components, star tree toppers, bells, gift bows, snowflakes and snowman bodies. The SUNLU 4-pack adds black, silver, red copper and brass for display prints with a shiny, reflective surface.
The finish is the reason to choose silk PLA: a glossy surface for pieces made to be seen, in the colours each spool offers.
PLA silk filament to start with
The spools below cover the colours and pack sizes in this guide, with the settings each one states.
FAQ: lasers and CNC
Is PLA silk the same as regular PLA?
It is a PLA filament, but the SUNLU listings describe it as glossier than regular PLA, with a smooth silky surface that needs no polishing.
What nozzle temperature does PLA silk need?
The SUNLU white spool and the red silk PLA+ spool both list 205-215°C, while the SUNLU 4-pack lists 200-230°C. The ANYCUBIC bundle states no nozzle temperature.
Does PLA silk need a heated bed?
The SUNLU spools list a bed of 60-80°C. The ANYCUBIC bundle states no bed temperature.
What speed should I print PLA silk at?
The SUNLU spools list 30-60mm/s, and the red spool adds that slower speeds enhance the silky finish.
What can I print with PLA silk?
Art and craft pieces, artistic models and decorative pieces, and Christmas decorations such as stockings, candy canes, tree ornaments, wreaths, star tree toppers, snowflakes and snowman bodies.
Related: best silk PLA filament, silk PLA vs PLA Plus, best PLA filament for 3D printers and how we pick.




