Best 1 1/2 Inch Cnc Router Bit (2026)
CNC router bits for slots, dados, channels and slab flattening, compared by cutting diameter, cutting length, shank and material.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best 1-1/2 Inch BitYonico 19107 Core Box9.7/10View on Amazon - 2
Best Spiral BitSpeTool Upcut Spiral9.6/10View on Amazon - 3
Best Straight BitYonico Straight 140319.6/10View on Amazon - 4
Best Surfacing BitBINSTAK 4-Wing 2 in9.7/10View on Amazon
A sign order calls for wide, rounded grooves across a hardwood panel, and the bit in the collet decides whether the channel comes out clean or ragged. The listings mix core box bits, straight bits, spiral bits and surfacing bits, each with its own diameter and length, so the size on the label is only the start. This guide to the best 1 1/2 inch cnc router bit compares the bits in this guide by cutting diameter, cutting length, shank, material and use, so the bit you buy matches the cut you need.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best 1-1/2 Inch Bit Yonico 19107 Core Box: The only 1-1/2 inch cutting diameter here, with a 3/4 inch radius and C3 carbide blades. Check price on Amazon
- Best Spiral Bit SpeTool Upcut Spiral: Solid carbide upcut spiral with a TAC coating and a maker claim of up to 2.5 times the life of an uncoated bit. Check price on Amazon
- Best Straight Bit Yonico Straight 14031: 1 inch straight bit in C3 carbide for dados and straight cuts on CNC, table mount and handheld routers. Check price on Amazon
- Best Surfacing Bit BINSTAK 4-Wing 2 in: 4-wing surfacing bit with a 2 inch cut diameter for slab flattening and spoilboard work. Check price on Amazon
Machines on the list

YONICO 19107 1-1/2-Inch Diameter Core Box Router
A 1-1/2 inch core box bit with a 3/4 inch radius and a 1 inch cutting depth, in C3 micro-grain tungsten carbide for CNC, table mount and handheld routers.
Pros
- 1-1/2 inch cutting diameter matches the search size
- 3/4 inch radius for rounded core box channels
- Premium C3 micro-grain tungsten carbide blades
- Silver induction brazing for strength and durability
Cons
- 1 inch cutting depth limits deep channels
- No warranty term is stated
- Overall length is not stated
- Rounded tip suits channels, not flat-bottom cuts

CNC Spoilboard Surfacing Router Bit 1/2" Shank
A 4-wing carbide-tipped surfacing bit with a 1/2 in shank, 2 in cut diameter and an anti-kickback design.
Pros
- Large 2 in cut diameter and 1/2 in cut length for quick bed surfacing and slab flattening
- Four carbide-tipped wings mounted to a solid hardened steel body
- Heat-resistant Teflon coating reduces resin build-up during long cuts
- Includes a 1/2 in to 1/4 in collet reduction sleeve in the box
Cons
- No warranty term is stated
- Needs a router with a 1/2 in chuck or collet to run without the adapter
- Operating speed is not stated in the listing
- Not for cutting metal or non-wood materials per the maker warning

SpeTool Upcut Spiral Router Bit 1/2 Shank
A solid carbide upcut spiral bit with a 1/2 inch cutting diameter, a 1-1/4 inch cutting length and a TAC coating, for slots, mortises, carving and engraving.
Pros
- Solid carbide with a TAC coating
- Maker claims up to 2.5 times the life of an uncoated bit
- 1-1/4 inch cutting length for slots and mortises
- Lists soft woods, hard woods, plywood, laminate, oak and MDF
Cons
- 1/2 inch cutting diameter is well under the 1-1/2 inch size
- No warranty term is stated
- Only one size in this listing

YONICO Router Bits Straight Bit 1-Inch Diameter X
A straight bit with a 1 inch cutting diameter and a 1-1/4 inch cutting length on a 1/2 inch shank, in C3 micro-grain tungsten carbide for dados and straight cuts.
Pros
- 1 inch cutting diameter with a 1-1/4 inch cutting length
- C3 micro-grain tungsten carbide blades
- Silver induction brazing for strength and durability
- For CNC, table mount and handheld routers
Cons
- 1 inch cutting diameter is under the 1-1/2 inch size
- No warranty term is stated
- Straight profile only: no rounded or shaped cuts
- Cutting length of 1-1/4 inch limits deep dados

CNC Spoilboard Surfacing Router Bit
A 1/2-inch shank surfacing router bit with a 1-inch cutting diameter, two-wing body and four-sided indexable carbide inserts.
Pros
- Four-sided solid carbide inserts can be rotated to fresh edges when worn, reducing replacement costs
- Heavy-duty 1/2-inch shank provides rigid support for flattening hardwood cutting boards
- Two-wing steel body includes an anti kickback design balanced for up to 18,000 rpm
- Handles soft and hard woods, MDF, plywood, acrylic and particle board
Cons
- 1-inch cutting diameter requires more passes than wider slab flattening bits
- No warranty term is stated in the listing
Other machines to compare
YONICO 19105 1-Inch Diameter Core Box Router Bit 1/2-InchCheck price on Amazon
YONICO Horizontal Crown Router Bit 1-1/2-Inch Radius 1/2-InchCheck price on Amazon
CNC Spoilboard Surfacing Router Bit 1/4 Inch ShankCheck price on Amazon
SpeTool 1/8 Inch Spiral Downcut Router Bit 1/4 Inch ShankCheck price on Amazon
SpeTool CNC Compression Router Bit 1/2 Inch Shank with ExtraCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Length | Shank | Material | Use | Warranty |
|---|---|---|---|---|---|---|---|
| Yonico 19107 Core Box | 9.7/10 | 1-1/2 inch | 1 inch (depth) | 1/2 inch | C3 tungsten carbide | Core box channels | Not stated |
| SpeTool Upcut Spiral | 9.6/10 | 1/2 inch | 1-1/4 inch | 1/2 inch | Solid carbide, TAC coated | Slots, mortises, carving | Not stated |
| Yonico Straight 14031 | 9.6/10 | 1 inch | 1-1/4 inch | 1/2 inch | C3 tungsten carbide | Dados, straight cuts | Not stated |
| BINSTAK 4-Wing 2 in | 9.7/10 | 2 inch | 1/2 inch | 1/2 inch | Carbide tipped steel | Slab flattening | Not stated |
| BINSTAK Surfacing 1 in | 9.6/10 | 1 inch | Not stated | 1/2 inch | Insert carbide | Slab flattening | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026.
The 1-1/2 inch diameter is the exception here
Only the Yonico core box bit carries a 1-1/2 inch cutting diameter. The SpeTool spiral cuts at 1/2 inch, the Yonico straight bit at 1 inch, the BINSTAK surfacing bit at 2 inch, and the other BINSTAK at 1 inch. A search for a 1-1/2 inch bit still turns up useful bits, but the diameter on the label is the first figure to check, since a bit that is too small leaves a narrow channel and a bit that is too large takes a wide pass.
Buying guide: best 1 1/2 inch cnc router bit
Match the diameter to the cut
Cutting diameter is the first figure to match. A 1-1/2 inch core box bit routes wide, rounded channels, a 1 inch straight bit cuts dados and straight grooves, a 1/2 inch spiral bit cuts slots and mortises, and a 2 inch surfacing bit flattens slabs. Pick the diameter by the channel or groove you need, not by the shank size.
Cutting length and depth
Cutting length sets how deep a pass runs. The SpeTool spiral and the Yonico straight bit each give a 1-1/4 inch cutting length, the Yonico core box bit gives a 1 inch cutting depth, and the BINSTAK surfacing bit gives a 1/2 inch cut length. The other BINSTAK title states no cut length, so check the listing before ordering.
Shank and collet
Every bit here has a 1/2 inch shank, so check that your router has a 1/2 inch collet before ordering. The SpeTool listing contradicts itself here: the title and spec table give a 1/2 inch shank, while the bullets mention a 1/4 inch collet. The BINSTAK surfacing bit comes with a collet reduction sleeve from 1/2 inch to 1/4 inch, with an inner diameter of 6.35 mm and an outside diameter of 12.7 mm.
Carbide and coating
Carbide is the cutting material on every bit here. The SpeTool is solid carbide with a TAC coating, and the maker claims the coating gives up to 2.5 times the life of an uncoated bit. The Yonico bits use C3 micro-grain tungsten carbide blades with silver induction brazing, and the BINSTAK surfacing bit is carbide tipped on hardened steel bodies. The other BINSTAK title states insert carbide.
Materials to cut
Match the bit to the material. The SpeTool lists soft woods, hard woods, plywood, laminate, oak and MDF. The BINSTAK surfacing bit lists woods, MDF, laminate, particle board, plywood, compact panel and acrylic, and states to avoid cutting metal and non-wood materials. The Yonico bits state general use on CNC, table mount and handheld routers without a material list, so check the listing for the material you cut.
Routing throws chips and dust. Wear eye and hearing protection, run dust extraction, and check the bit and collet before each run. Keep hands clear of the bit while the router runs, and let the bit stop before you lift the router from the work.
Project Match
- Rounded channels and grooves: Yonico 19107 Core Box, with a 1-1/2 inch cutting diameter and a 3/4 inch radius.
- Slots, mortises and carving: SpeTool Upcut Spiral, with a 1/2 inch cutting diameter and a 1-1/4 inch cutting length.
- Dados and straight grooves: Yonico Straight 14031, with a 1 inch cutting diameter and a 1-1/4 inch cutting length.
- Slab flattening and spoilboard work: BINSTAK 4-Wing 2 in, with a 2 inch cut diameter and a 1/2 inch cut length.
- Surfacing with a 1 inch diameter: BINSTAK Surfacing 1 in, with a 1 inch cutting diameter on a 1/2 inch shank.
How the scores add up
Each bit is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing. None of the listings states a safety listing or a warranty term, so safety and warranty score nothing here.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Yonico 19107 Core Box | 9.7 | 32 | 22 | 21 | n/a | 0 |
| SpeTool Upcut Spiral | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Yonico Straight 14031 | 9.6 | 29 | 21 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What size router bit do I need for a 1-1/2 inch channel?
A 1-1/2 inch core box bit routes a 1-1/2 inch channel in one pass. The Yonico core box bit here carries a 1-1/2 inch cutting diameter with a 3/4 inch radius. A smaller bit needs more passes to widen the channel.
Can I use these bits on a handheld router?
The Yonico bits state use on CNC, table mount and handheld routers. The SpeTool states use with a CNC router and a handheld router. The BINSTAK surfacing bit states use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
What is the difference between a core box bit and a straight bit?
A core box bit has a rounded tip for channels and grooves, while a straight bit has a flat tip for dados and straight cuts. The Yonico core box bit here has a 3/4 inch radius, and the Yonico straight bit has a 1 inch cutting diameter for dado grooves.
Do any of these bits state a warranty?
None of the listings here states a warranty term. The SpeTool listing mentions after-sales service, but gives no warranty term. Check the listing for the bit you buy.
Related: the cnc tooling hub, the best surfacing router bit with top bearing, the best carbide insert surfacing bit for CNC, the best beading router bit, v bit vs end mill for CNC and compression vs spiral router bit.




