PTFE Tubing Temperature Rating for 3D Printers
PTFE tubing for 3D printers is rated up to 260°C in the listings that state a number, with 5M tubes, cutters in every kit and couplers in some kits.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Sovol Upgraded PTFE Tube Star-shaped Inner9.7/10View on Amazon - 2
5M (16.4ft) PTFE Teflon Tube for 1.75mm Filament9.6/10View on Amazon - 3
PTFE Tube Kit 2.5mm ID x 4mm OD9.5/10View on Amazon - 4
Asbrot Compatible with Bambu-Lab PTFE Tube 2.5mm9.5/10View on Amazon
What is the PTFE tubing temperature rating? The listings in this guide rate their PTFE tubing for high-temperature printing, and the listings that give a number agree on the same ceiling. The sections below give that number, explain what it covers, and compare the tubes in the gear section.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Some listings state a temperature number and others do not, so this guide names the number where it is stated.

Sovol Upgraded PTFE Tube Star-shaped Inner
Star-shaped inner channel PTFE tube, 5M long, rated up to 260°C, with 2 couplers and a tubing cutter.
Pros
- Rated up to 260°C, stated by the maker
- Star-shaped inner channel, claimed 30% less resistance than round inner channel tubes
- 2 couplers and a tubing cutter included
- 1 Year Warranty stated in the listing
Cons
- The 5M length is uncut; longer runs need the couplers to join pieces
- Couplers fit only tubes with a 4mm outer diameter
- Sized for 1.75mm filament only
- The rating tops out at 260°C

5M (16.4ft) PTFE Teflon Tube for 1.75mm Filament
Clear PTFE tube, 5M long and 2.5mm ID by 4mm OD, rated up to 260°C, with a tubing cutter.
Pros
- Rated up to 260°C, stated by the maker
- Low-friction surface for TPU, TPE and PLA filament
- Tubing cutter included for clean, flat cuts
- Resists abrasion, cracking and deformation under pressure
Cons
- No warranty term is stated
- No couplers are included for joining tube pieces
- Sized for 1.75mm filament only
- The rating tops out at 260°C

PTFE Tube Kit 2.5mm ID x 4mm OD
White PTFE tube kit, 5M long and 2.5mm ID by 4mm OD, with a cutter, 4 couplers and 3 fastener strips.
Pros
- 4 couplers and 3 fastener strips included
- Tubing cutter included
- Fits Bambu Lab, Creality, Flashforge, Prusa and Anycubic printers named in the listing
- Low-friction surface for TPU and TPE filament
Cons
- No temperature number is stated, only high-temperature resistance
- No warranty term is stated
- The 5M length is uncut; longer runs need the couplers to join pieces
- Couplers fit only tubes with a 4mm outer diameter

Asbrot Compatible with Bambu-Lab PTFE Tube 2.5mm
Cream-color PTFE tube, 5M long and 2.5mm ID by 4mm OD, with a tubing cutter.
Pros
- Low-friction surface for TPU and TPE filament
- Tubing cutter included
- Heat-resistant, milky white construction
- Resists corrosion for long-lasting performance
Cons
- No temperature number is stated, only high-temperature resistance
- Compatibility covers only the Bambu Lab, Creality and Prusa models named in the listing
- No couplers are included for joining tube pieces
- The 5M length is uncut, so trimming it needs the included cutter
PTFE Tubing Temperature Rating: The Number
The 3DMkspaceu tube (on Amazon) and the Sovol tube (on Amazon) each state a temperature rating of up to 260°C, so the rating is the same across the listings that give a number. The Asbrot tube (on Amazon) and the Generic tube (on Amazon) describe high-temperature resistance but give no temperature number, so their ceilings are not stated.
At that ceiling the 3DMkspaceu tube keeps its shape through long printing sessions, and the Sovol tube resists carbonization and brittleness during long high-temperature printing.
What the Rating Covers
The rating covers the tube keeping its shape while the printer runs hot. The 3DMkspaceu listing states the tube keeps its structural integrity during prolonged printing sessions, and the Sovol listing states stable extrusion with no carbonization or brittleness during prolonged high-temperature printing. Stay within the stated ceiling.
The 3DMkspaceu, Asbrot and Generic tubes state a size of 2.5mm ID by 4mm OD, and the 3DMkspaceu and Sovol tubes state they are made for 1.75mm filament. Every tube in this guide comes in a 5M length, listed as 16.4 ft.
How to Choose Between the Tubes
Start with the rating: the 3DMkspaceu and Sovol tubes state a ceiling of up to 260°C, while the Asbrot and Generic tubes state high-temperature resistance without a number. If the rating matters for the printer, pick a tube that states a rating.
Then look at what comes in the box. The Sovol kit adds 2 couplers and a cutter, and the Generic kit adds 4 couplers, 3 fastener strips and a cutter. The 3DMkspaceu and Asbrot kits each add a cutter. Couplers join tube pieces when a length is not enough.
Finish with fit. The tubes name Bambu Lab, Creality, Prusa and Flashforge printers, with the Generic kit also naming Anycubic models. Match the tube to the models the listing names. For filament sizes, see our guide to 3D printer filament sizes.
PTFE Tubing for 3D Printers
The rating above points to a tube that holds its shape at high temperature, so the gear below is the PTFE tubing from the listings in this guide, ranked by the temperature rating and the kit contents.
FAQ: lasers and CNC
What is the PTFE tubing temperature rating?
Up to 260°C, per the 3DMkspaceu and Sovol listings. The Asbrot and Generic listings describe high-temperature resistance without giving a temperature number.
What size PTFE tubing fits 1.75mm filament?
The 3DMkspaceu, Asbrot and Generic tubes state a size of 2.5mm ID by 4mm OD, and the 3DMkspaceu and Sovol tubes state they are made for 1.75mm filament. See our PTFE tubing sizes chart for the full range.
How long is the PTFE tubing in these kits?
Every tube in this guide comes in a 5M length, listed as 16.4 ft.
Does PTFE tubing work with TPU and TPE filament?
Yes, per the listings. The 3DMkspaceu tube is listed for TPU, TPE and PLA filament, and the Asbrot and Generic listings describe low-friction feed for soft filaments such as TPU and TPE.
What comes with the PTFE tubing kits?
Every kit includes a tubing cutter. The Sovol kit adds 2 couplers, and the Generic kit adds 4 couplers and 3 fastener strips. The 3DMkspaceu and Asbrot kits include the cutter only.
Which printers do these PTFE tubes fit?
The listings name Bambu Lab, Creality, Prusa and Flashforge printers, with the Generic kit also naming Anycubic models.
Related: our PTFE tubing sizes chart, guide to 3D printer filament sizes and guide to improving 3D print quality. Also see our 3D printers hub.




