Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Prusa Core One vs Prusa MK4: Which One Should You Buy?

Prusa Core One vs Prusa MK4 comes down to the accessories: enclosure monitoring and cleanup on the CORE One side, flow and abrasive-ready nozzles on the MK4 side.

Prusa Core One vs Prusa MK4: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Genuine E3D High Flow Prusa Nozzle for MK4/XL 3DGenuine E3D High Flow Prusa Nozzle for MK4/XL 3D9.7/10View on Amazon
  2. 2Buddy3D Camera for Original Prusa CORE One 3DBuddy3D Camera for Original Prusa CORE One 3D9.6/10View on Amazon
  3. 3BIQU Panda Diaper Filament Waste Collection MatBIQU Panda Diaper Filament Waste Collection Mat9.6/10View on Amazon
  4. 4E3D Prusa ObXidian MK4/XL Nozzle - 1 pcs - 0.4mmE3D Prusa ObXidian MK4/XL Nozzle - 1 pcs - 0.4mm9.6/10View on Amazon

A maker with a print order to fill and a prototype to iterate: the choice between Prusa’s current machines comes down to how you print, not just what you print. Prusa Core One vs Prusa MK4 compares different directions: an enclosed machine with accessories for monitoring and cleanup, and a Nextruder machine with nozzles built for flow and abrasive materials. The listings state no build volume or speed for either printer, so this article compares what the accessories on each side actually do.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: pick the CORE One side for remote monitoring and cleanup inside an enclosure; pick the MK4 side for flow and abrasive-ready nozzles.

Machines on the list

Genuine E3D High Flow Prusa Nozzle for MK4/XL 3D

Genuine E3D High Flow Prusa Nozzle for MK4/XL 3D

E3D9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A genuine E3D high flow 0.4mm ObXidian nozzle for the Prusa MK4 and XL, with a tool steel insert and E3DLC coating, claiming up to 70% higher flow.

Pros

  • 0.4mm ObXidian nozzle with tool steel insert and E3DLC coating
  • Maker claim: up to 70% higher volumetric flow rate
  • Size engraved on the nozzle for easy identification
  • Non-stick coating, less plastic build-up

Cons

  • Only compatible with Prusa MK4 and XL printers
  • Flow gain is a maker claim, not a measured figure
  • No warranty term is stated
  • No weight or dimensions are stated
Buddy3D Camera for Original Prusa CORE One 3D

Buddy3D Camera for Original Prusa CORE One 3D

ORIGINAL PRUSA9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1080p HD WiFi camera with IR night vision for the Original Prusa CORE One, with timelapse support and Prusa Connect integration.

Pros

  • 1080p HD with IR night vision, day or night monitoring
  • Magnetic mount on the CORE One frame
  • Direct integration with Prusa Connect and the Prusa App
  • Engineered to operate in temperatures up to 65 °C (149 °F)

Cons

  • No warranty term is stated
  • Only for the CORE One family, not other Prusa printers
  • Firmware updates run over the air, via Prusa Connect
BIQU Panda Diaper Filament Waste Collection Mat

BIQU Panda Diaper Filament Waste Collection Mat

BIQU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A flexible silicone waste collection mat for the Prusa CORE One, with a raised edge, two integrated handles and an anti-static surface, made to lift, tip and rinse clean.

Pros

  • Flexible silicone, soft and easy to clean
  • Raised edge contains filament waste
  • Two integrated handles for quick removal
  • Anti-static surface, less prone to dust

Cons

  • No dimensions are stated
  • No weight is stated
  • Only fits the Prusa CORE One
  • No warranty term is stated
E3D Prusa ObXidian MK4/XL Nozzle - 1 pcs - 0.4mm

E3D Prusa ObXidian MK4/XL Nozzle - 1 pcs - 0.4mm

E3D9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 0.4mm ObXidian nozzle for the Prusa MK4 and XL Nextruder, with an all-metal filament guide, a tool steel insert and E3DLC coating, built for abrasive and filled polymers.

Pros

  • 0.4mm ObXidian nozzle for the Nextruder
  • All-metal filament guide
  • Tool steel insert with E3DLC coating, non-stick properties
  • Built for abrasive and filled polymers

Cons

  • No flow figure is stated
  • No engraved size is mentioned
  • No warranty term is stated
  • No weight or dimensions are stated

Other machines to compare

Side by side

Spec E3D High Flow Nozzle Buddy3D Camera BIQU Waste Mat E3D ObXidian Nozzle
HQ Score 61 60 58 57
Side MK4 CORE One CORE One MK4
Nozzle size 0.4mm Not stated Not stated 0.4mm
Flow Up to 70% higher flow (maker claim) Not stated Not stated Not stated
Material ObXidian, tool steel, E3DLC Not stated Flexible silicone, anti-static ObXidian, tool steel, E3DLC
Fits Prusa MK4 and XL CORE One family Prusa CORE One Prusa MK4 and XL
Camera Not stated 1080p HD WiFi, IR night vision Not stated Not stated
Dimensions Not stated 2.36 x 3.54 x 1.97 inches Not stated Not stated

Specs are what each manufacturer publishes as its rating on the listing, collected 10 November 2026.

Prusa Core One vs Prusa MK4: the enclosure side

The CORE One side is about the workspace around the print. The BIQU mat sits inside the machine and catches filament waste before it falls into chassis gaps, and the Buddy3D camera watches the print from anywhere through Prusa Connect, with 1080p HD, IR night vision and a magnetic mount.

The MK4 side: nozzles and flow

The MK4 side is about the nozzle. Both E3D listings are 0.4mm ObXidian nozzles for the MK4 and XL Nextruder, with a tool steel insert and E3DLC coating for abrasive and filled polymers. The high flow version adds a maker claim of up to 70% higher flow and an engraved size; the plain version states neither.

Materials

The high flow listing splits materials by variant: brass versions suit everyday high flow printing with PLA, PETG and ASA, while the ObXidian version suits abrasive and filled polymers. The mat and camera listings name no printing materials. For more on filament choice, see the 3D printer filament types compared.

Monitoring and workflow

Only the CORE One side monitors: the Buddy3D camera pairs in minutes with a QR code, streams 1080p through Prusa Connect and the Prusa App, and updates its firmware over the air. The mat gathers waste in one place: lift, tip, done, in the listing’s words. On the MK4 side, the workflow gain is the nozzle change, described as easier. For more camera options, see the best 3D printer camera picks.

Safety and enclosure

None of the four listings states a safety certification or a warranty term. The camera is the only accessory with a stated temperature limit: engineered to run in temperatures up to 65 °C (149 °F) inside an enclosure. The mat keeps waste out of chassis gaps, where buildup could affect performance.

Support and warranty

Support on the CORE One side runs through Prusa Connect and the Prusa App, with automatic over-the-air firmware updates for the camera.

Choose the Prusa CORE One if

  • You print inside an enclosure and want to watch prints remotely.
  • You want waste collected in one place.
  • Prusa Connect is already part of your workflow.

Choose the Prusa MK4 if

  • You print abrasive or filled polymers and want a hardened nozzle.
  • More volumetric flow matters to you.
  • You want the nozzle size engraved for easy identification.

For a different head-to-head on the MK4, see Prusa Mk4 vs Bambu Lab P2s.

Safety

Nozzles run hot: change one only when it has cooled, and keep hands clear while the machine runs.

Project Match

  • Abrasive and filled polymers: E3D High Flow Nozzle or E3D ObXidian Nozzle, both 0.4mm ObXidian.
  • Everyday PLA, PETG and ASA: E3D High Flow Nozzle.
  • Remote print monitoring and timelapse: Buddy3D Camera.
  • Filament waste in a CORE One: BIQU Waste Mat.
  • Work area: Not stated on any listing.

FAQ: lasers and CNC

Is the Prusa CORE One better than the Prusa MK4?

The listings compare accessories, not the printers themselves. The CORE One accessories add monitoring and cleanup around an enclosed machine, while the MK4 accessories add flow and abrasive-ready nozzles.

Do the E3D nozzles fit the Prusa CORE One?

No. Both E3D listings state compatibility with MK4 and XL printers only; the CORE One accessories here are the BIQU mat and the Buddy3D camera.

What is the difference between the two E3D nozzles?

Both are 0.4mm ObXidian nozzles for the MK4 and XL Nextruder. The high flow version claims up to 70% higher volumetric flow rate and has its size engraved on it; the plain version states no flow figure.

Can I monitor a CORE One print remotely?

Yes, with the Buddy3D camera: 1080p HD with IR night vision through Prusa Connect, paired with a QR code.

Related: 3D printer maintenance and 3D printer types.

More buying guides

3D Printer Accessories ·

Best 3D Scanner for Jewelry (2026)

Five handheld 3D scanners for jewelry work, compared by accuracy, scan speed, color capture and weight, from fine laser detail to full-color scans.