Plastic Sheet Thickness Chart
A plastic sheet thickness chart for laser makers, comparing acrylic sheet thickness, sizes and finishes so you can match a sheet to signs, keychains and small cut parts.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
XLNT TECH Colored Acrylic Sheets 8x129.5/10View on Amazon - 2
Geetery 30 Pcs Colored Acrylic Sheets9.5/10View on Amazon - 3
FaeliKnise Glitter Pearl Acrylic Sheet9.4/10View on Amazon - 4
Lesnlok 5 x 7 Transparent Colored Acrylic Sheet9.3/10View on Amazon
You have a sign design ready, a sheet loaded and a cut that either drops out clean or needs another pass, and the difference often starts before the job runs, with the sheet itself. A plastic sheet thickness chart helps you match the sheet in hand to the job, so a keychain blank, a cake topper and a small sign each start from stock that fits the bed and the design.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

XLNT TECH Colored Acrylic Sheets 8x12
Cell-cast acrylic at 8" x 12" and 1/8" thick, in 10 translucent colors for CO2 laser cutting.
Pros
- 8" x 12" size fits Glowforge, xTool P2 and K40 beds, per the maker
- Stated thickness tolerance of ±0.2mm
- 10 colors, a sheet of each color
- Kraft paper on both sides
Cons
- Transparent sheets require a CO2 laser, per the maker
- Only the 1/8" thickness in this pack
- Replacement window is 30 days
- Sheet size limits larger signs

Geetery 30 Pcs Colored Acrylic Sheets
Translucent cast acrylic at 8 x 8 inches and 1/8 inch thick, in a 30 piece pack across 15 colors.
Pros
- 30 sheets across 15 translucent colors
- Maker states sheets cut with lasers, saws, drills or CNC routers
- Protective paper on each sheet
- 8 x 8 inch size for ornaments and small signs
Cons
- Only the 1/8 inch thickness in this pack
- Colors are translucent, not opaque
- No warranty term is stated
- Square sheets limit long signs

FaeliKnise Glitter Pearl Acrylic Sheet
Glitter pearl cast acrylic at 12x8 inches and 1/8 inch thick, in a 6 color pack with swirl patterns.
Pros
- 12x8 inch sheets for signs and displays
- Glitter on one side, swirl pattern on both sides
- Pearlescent finish, stated as easy to clean
- Cast PMMA for laser, CNC, drill or saw work, per the maker
Cons
- Glitter sits on one side only
- Patterns vary slightly between sheets
- Only 6 sheets in the pack
- Only the 1/8 inch thickness in this pack

Lesnlok 5 x 7 Transparent Colored Acrylic Sheet
Transparent colored acrylic at 5 x 7 inches and 1/8 inch thick, in a 12 pack for small laser projects.
Pros
- 12 sheets in 12 colors for small parts
- Cast acrylic stated for laser engraving and cutting
- Double-layer bubble bags protect corners, per the maker
- 5 x 7 inch size for keychains and tags
Cons
- Smallest sheets here at 5 x 7 inches
- No warranty term is stated
- Panels are semi transparent, not opaque
- Only the 1/8 inch thickness in this pack
Plastic sheet thickness chart: what the figures mean
Every sheet below is stated at 1/8 inch thick, also written as 3mm. The packs differ in sheet size, color count and finish, not in stated thickness. Read the chart by size, then by finish.
| Pack | Sheet size | Stated thickness | Sheets in pack |
|---|---|---|---|
| XLNT TECH Acrylic 8×12 | 8″ x 12″ | 1/8″ (3mm) | 10 |
| Geetery Acrylic 8×8 | 8 x 8 inches | 1/8 inch (3 mm) | 30 |
| FaeliKnise Pearl 12×8 | 12×8 inches | 1/8 inch | 6 |
| Lesnlok Acrylic 5×7 | 5″ x 7″ | 1/8 inch (3mm) | 12 |
Thickness alone does not settle a job. The XLNT TECH pack states a tolerance of ±0.2mm, which matters when parts must slot together. Where no tolerance figure is given, leave room in slots and joints.
How to read thickness before you cut
Start with the machine. The XLNT TECH sheets are transparent and translucent, and the maker states they require a CO2 laser at a 10,600nm wavelength to cut and engrave, with diode users directed to opaque acrylic options instead. If your machine is a diode laser, that note decides the pack before size does. Our can you cut acrylic with a laser cutter guide covers the machine side in more depth.
Next, match sheet size to the design and the bed. The XLNT TECH sheets are sized at 8″ x 12″ (20 x 30 cm) to slide onto the bed of a Glowforge Pro, Glowforge Plus, xTool P2 or OMTech K40 without resizing, per the maker. For cutting methods beyond the laser, see acrylic sheets how to cut.
Keep the protective layer on while you work. The Geetery maker says not to tear the protective paper off during processing, and the XLNT TECH sheets ship with kraft paper on both sides.
One material warning belongs on every chart like this: never laser PVC, vinyl, PVC faux leather, polycarbonate or ABS. This chart covers acrylic sheets only.
Gear for working from the chart
Use these packs at the measuring step, when you pick a sheet size and finish for the design in front of you.
Choosing by sheet size and finish
Color and finish change what a finished piece looks like more than thickness does here. The Geetery pack spreads its sheets across 15 translucent colors, the Lesnlok pack across 12 colors at 5″ x 7″, and the XLNT TECH pack across 10 colors. The FaeliKnise pack adds glitter on one side and a swirl pattern under a pearlescent finish, and the maker notes that patterns vary slightly between sheets.
Translucent sheets let light through the finished piece, which suits LED night lights and ornaments named by the XLNT TECH maker.
FAQ: lasers and CNC
What thickness are the acrylic sheets in this chart?
Each pack here is stated at 1/8 inch thick, also written as 3mm. The XLNT TECH maker states a thickness tolerance of ±0.2mm for its cell-cast sheets.
Can a diode laser cut these transparent acrylic sheets?
The XLNT TECH maker states that its transparent and translucent sheets require a CO2 laser at a 10,600nm wavelength, and directs diode users to opaque acrylic options. Check your machine type against that note before ordering.
What sheet size fits a Glowforge or xTool P2 bed?
The XLNT TECH sheets at 8″ x 12″ (20 x 30 cm) slide onto those beds without resizing, per the maker.
Should protective paper stay on during laser work?
Yes, where the maker says so. The Geetery maker says not to tear the protective paper off during processing, and the XLNT TECH sheets ship with kraft paper on both sides.
Related: the engraving materials hub, can you cut acrylic with a laser cutter and acrylic sheets how to cut.




