How Thick Is Wood Veneer: Sizes for Laser Projects
This guide compares the stated thicknesses, sheet sizes and laser notes of veneer sheets for laser projects.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Edge Supply Mahogany Wood Veneer Sheet Flat Cut9.5/10View on Amazon - 2
Boao 12 Pcs Wood Veneer Sheets 12" x 12", Cherry9.5/10View on Amazon - 3
Juexica 30 Pcs 7.9"x7.9" Wood Veneer Sheets9.4/10View on Amazon - 4
OMUKI Natural Wood Veneer, Thin Wood Sheets9.4/10View on Amazon
A veneer sheet can turn a plain box, a sign blank or a cabinet door into a piece that looks like solid wood, and the sheet you pick decides how it cuts, bends and glues. This guide answers how thick is wood veneer, using the thickness each maker states for the sheets in this guide, so you can match the sheet to the project.
The sheets in this guide state thicknesses from about 0.5 mm to .024 inch. The Juexica variety pack states about 0.5 mm, with the thickness varying by wood. The Boao set states 0.02 inches. The Edge Supply mahogany sheet states an overall thickness of .024 inch on a 10 mil paper back. The Omuki sheet states no thickness.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Thickness varies by maker and by sheet, and the Omuki sheet states no thickness at all.

Edge Supply Mahogany Wood Veneer Sheet Flat Cut
A mahogany wood veneer sheet, 24 x 96 inches, with a 10 mil paper back and an A grade face, ready to stain.
Pros
- A grade face, ready to stain
- 10 mil paper back for easy handling
- 24 x 96 inches covers large cabinet surfaces
- Flexible sheet that will not split the grain when bent
Cons
- Non glued, so you supply the contact adhesive
- Mahogany only, with no other wood in this listing
- Large sheet needs room to cut and handle
- 1 sheet per order, so big jobs need more sheets

Boao 12 Pcs Wood Veneer Sheets 12" x 12", Cherry
A set of 12 wood veneer sheets, 12 x 12 inches, in cherry, maple and walnut, 0.02 inches thick.
Pros
- 12 pieces: 4 each of cherry, maple and walnut
- 0.02 inches thick, a balance of durability and flexibility
- 12 x 12 inches fits jewelry boxes, door panels and marquetry
- Straight, parallel edges free of blemishes
Cons
- Maker says do not use a laser cutter
- 12 x 12 inches is a small sheet, so large surfaces need many pieces
- Cherry, maple and walnut only in this set
- Thin at 0.02 inches, so it needs care in handling

Juexica 30 Pcs 7.9"x7.9" Wood Veneer Sheets
A variety pack of 30 wood veneer sheets, 7.9 x 7.9 inches, in mixed brown colors, about 0.5 mm thick.
Pros
- 30 sheets in mixed brown colors
- About 0.5 mm thick, easy to cut into precise shapes
- Real wood with natural grain patterns
- Suits marquetry and inlay
Cons
- Thickness varies by wood, about 0.5 mm
- No adhesive included
- 7.9 x 7.9 inches is a small sheet
- No warranty term is stated

OMUKI Natural Wood Veneer, Thin Wood Sheets
A natural black walnut wood veneer sheet, 8 x 95 inches, with backing materials for durability and flexibility.
Pros
- Natural black walnut with varied grain and tone
- Flexible for flat or curved surfaces
- Backing materials add durability and stability
- Suits furniture, guitar and speaker work
Cons
- No thickness is stated
- No warranty term is stated
- Color, pattern and size can differ between batches
- Thin sheet, similar in shape to thicker paper, so it needs care
How thick is wood veneer?
Wood veneer sold for craft and restoration work is a thin sheet, far thinner than most plywood panels. The listings in this guide state about 0.5 mm, 0.02 inches and .024 inch overall, while the Omuki sheet gives no thickness figure at all.
A paper back adds handling strength. The Edge Supply sheet is 10 mil paper backed, which the maker says helps you grip the veneer while you work. The Boao set is backed hardwood veneer. The Juexica sheets carry no adhesive, so you pick the glue, and the Edge Supply sheet is non glued, with the maker saying to apply contact adhesive with a roller.
What thickness means for laser work
Thin veneer engraves with little effort, but it burns and curls more easily than thicker stock, and some thin sheets are not meant for a laser bed at all. That trade is why the stated thickness matters, even though the sheets in this guide sit close together, from about 0.5 mm to .024 inch overall.
Check the listing before you cut. The Boao listing says plainly: do not use a laser cutter. That set is made for jewelry boxes, door panels, marquetry and furniture refinishing, not for a laser bed. The other sheets in this guide carry no laser warning in their listings. Never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS.
How to pick a thickness for your project
Match the sheet to the job. For furniture and cabinet restoration, the Edge Supply sheet is the pick here: a 24 x 96 inch mahogany sheet, A grade face, ready to stain, paper backed.
For small crafts, the Boao set gives 12 pieces at 12 x 12 inches in cherry, maple and walnut, and the Juexica pack gives 30 pieces at 7.9 x 7.9 inches in mixed brown colors. Small sheets suit jewelry boxes, marquetry and inlay.
For guitar, speaker and automotive interior work, the Omuki black walnut sheet is the flexible pick, with backing materials for durability. Its listing states no thickness, so order it for the wood and the flexibility. The listing gives the size as 8 x 95 inches.
The veneer sheets in this guide
The sheets below cover the thickness range above, from about 0.5 mm to .024 inch, with the sheet sizes and uses each maker states.
FAQ: lasers and CNC
How thick is wood veneer for laser engraving?
The sheets in this guide state about 0.5 mm, 0.02 inches and .024 inch overall, and the Omuki sheet states no thickness. The Boao listing says do not use a laser cutter.
Is 0.02 inch veneer thick enough for furniture repair?
The Boao set at 0.02 inches is made for jewelry boxes, door panels, marquetry and furniture refinishing, and the maker calls it a balance of durability and flexibility. For larger cabinet and furniture surfaces, the Edge Supply sheet at .024 inch overall and 24 x 96 inches, paper backed, is the restoration pick here.
Can you laser cut wood veneer?
It depends on the sheet. The Boao listing says do not use a laser cutter, so keep that set off the laser bed. The other sheets in this guide carry no laser warning. Never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS.
What size veneer sheet should I buy?
The Edge Supply sheet is 24 x 96 inches for cabinets and furniture. The Boao set is 12 x 12 inches and the Juexica pack is 7.9 x 7.9 inches for small crafts. The Omuki sheet is listed at 8 x 95 inches.
Related: the veneer vs plywood for laser engraving guide, wood vs metal for laser engraving and how to engrave photos on wood with a laser.




