Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Water Washable vs Standard Resin: Which One Should You Buy?

Water washable resin rinses with water instead of alcohol, while standard resin needs solvent cleanup; the choice is about cleanup and fit.

Water Washable vs Standard Resin: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Colourbing 8 Color PETG 3D Printer Filament BundleColourbing 8 Color PETG 3D Printer Filament Bundle9.5/10View on Amazon
  2. 2Revopoint MINI 2 3D ScannerRevopoint MINI 2 3D Scanner9.6/10View on Amazon
  3. 3Gizmo Dorks 3mmGizmo Dorks 3mm9.6/10View on Amazon
  4. 4ANYCUBIC Water Washable ABS-Like Resin 3.0ANYCUBIC Water Washable ABS-Like Resin 3.0View on Amazon
  5. 5ANYCUBIC Water Washable ABS-Like 3D Printer ResinANYCUBIC Water Washable ABS-Like 3D Printer ResinView on Amazon
  6. 6ELEGOO Water Washable 3D Printer Resin 2.0ELEGOO Water Washable 3D Printer Resin 2.0View on Amazon
  7. 7ELEGOO Water Washable 3D Printer Resin Ceramic Grey 1000gELEGOO Water Washable 3D Printer Resin Ceramic Grey 1000gView on Amazon
  8. 8ELEGOO Water Washable 3D Printer Resin Ceramic Grey 2000gELEGOO Water Washable 3D Printer Resin Ceramic Grey 2000gView on Amazon
  9. 9ANYCUBIC Upgraded Water Washable 3D Printer Resin 2.0ANYCUBIC Upgraded Water Washable 3D Printer Resin 2.0View on Amazon

Water washable vs standard resin comes down to cleanup: water washable resin rinses with clean water, while standard resin, the baseline these listings compare against, is washed with alcohol or IPA. If easy cleanup matters, water washable resin is the simpler choice. The sections below compare cleanup, strength, shrinkage and printer fit, then look at the water washable resins in this guide.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Water washable resin, in plain terms

Water washable resin is a photopolymer resin whose formula includes hydrophilic agents, so residual liquid resin washes off with water. Every water washable listing in this guide states the same core point: washing needs water, not alcohol or IPA. The Anycubic listings describe hydrophilic agents or hydrophilic groups with good water solubility, and the Elegoo listings describe rinsing with clean water or tap water. That change removes a solvent purchase from the wash step.

Low odor is another repeated listing claim: Anycubic describes its resins as low odor, and the older Elegoo listing describes its washable resin liquid as low odor and non-irritating, while the newer Elegoo listing describes an odor-free cleaning process. Low odor is a comfort claim from the listing, not a safety certification, and no listing here states a safety certification for resin handling.

What standard resin means here

Standard resin, in this guide, is the baseline the water washable listings compare against: a resin whose wash step uses alcohol or IPA. The water washable listings state that contrast directly, since each says its formula does not require alcohol or IPA for cleaning. No standard resin listing is included in this guide’s set, so this guide states no specific standard formula, no standard strength figure and no standard shrinkage figure. Any standard resin choice should be judged on its own listing, in the same way: wash liquid, stated strength, stated shrinkage and stated printer fit.

That gap matters for the comparison. Water washable resin wins the cleanup question on the listings alone, because water replaces a solvent wash. For every other question, the answer depends on the formulas being compared, and this guide states only what the water washable listings publish. Where a detail is missing below, the text says Not stated.

Cleanup compared

Aspect Water washable resin Standard resin
Wash liquid Water, as stated in every listing here Alcohol or IPA, as stated in the contrast
Solvent purchase Not needed for washing, per the listings Needed for washing, per the contrast
Odor during washing Low odor or odor-free washing stated in the listings Not stated in this guide’s set

The wash step is where water washable resin changes the workflow most. The Anycubic Washable 2.0 listing says its formula can be cleaned directly with water instead of alcohol, the Anycubic ABS-Like 3.0 listing says residual liquid resin washes off with water with no alcohol needed, and the newer Elegoo listing says its formula only requires rinsing with clean water. The older Elegoo listing adds that tap water is enough. An Anycubic listing also notes ultrasonic cleaning as an option for its resin.

Water cleanup does not remove the rest of post-processing. Wash water carries residual resin. The listings state no disposal method, so this guide states none. For a wider look at resin types, see 3D printing resin vs UV resin.

Strength, shrinkage and detail

Strength figures in this guide come only from the Anycubic listings, and they belong to those listings alone. The Anycubic ABS-Like 3.0 listing states a Shore Hardness of 86D and an elongation at break of up to 40%, and says the resin suits prints that require drilling or tapping. The Anycubic Washable 2.0 listing states an elongation rate of 16.62% and describes its finished models as highly flexible and resistant to cracking. Those figures describe different formulas, so they should not be compared as if a resin were simply stronger on that figure.

Shrinkage and detail claims follow the same pattern. The Anycubic ABS-Like 3.0 listing states high precision and low shrinkage, with sharp, accurate models that keep their shape after printing. The Anycubic Washable 2.0 listing states a precision of up to 0.15mm and lower shrinkage, aimed at detail in miniature models. The older Elegoo listing states high precision and low shrinkage in words, without a figure. The newer Elegoo listing describes smooth surfaces, fine details and sharp edges, without a shrinkage claim.

Printer fit

Compatibility is broad on paper for every resin here, with a check that matters: wavelength. The Anycubic ABS-Like 3.0 listing states compatibility with all LCD and DLP printers and says it works best with Anycubic LCD printers. The Anycubic Washable 2.0 listing states compatibility with a wide range of LCD and DLP printers working within the 365-405nm wavelength. The older Elegoo listing names 405nm in its title and states suitability for all resin printers of the LCD, MSLA and DLP types. The newer Elegoo listing states compatibility with Elegoo and other brand resin printers, without stating a wavelength, so wavelength for that resin is Not stated.

Size is uniform across the set: each listing states 1kg or 1000g, in Grey or Ceramic Grey, so a maker who needs a different color should look at another formula.

The resins in this guide

Anycubic ABS-Like 3.0

The Anycubic Water Washable ABS-Like Resin 3.0 listing states a water washable formula with Shore Hardness of 86D and elongation at break of up to 40%. It states high precision, low shrinkage, low odor and compatibility with all LCD and DLP printers, in Grey, 1kg.

Anycubic Washable 2.0

The Anycubic Water Washable Resin 2.0 listing states a precision of up to 0.15mm, an elongation rate of 16.62%, low odor and compatibility with LCD and DLP printers working within the 365-405nm wavelength, in Grey, 1000g. It suits a maker chasing fine detail in miniature models with a water wash.

Elegoo Washable 2.0

The Elegoo Water Washable Resin 2.0 listing states rinsing with clean water, with no alcohol or IPA needed, plus smooth surfaces, fine details and sharp edges, in Ceramic Grey, 1000g. It names prototypes, figures, jewelry and mechanical parts among its uses.

Elegoo Washable 405nm

The older Elegoo Water Washable Resin listing states cleaning with tap water, with no alcohol or IPA needed, plus high precision, low shrinkage, fast curing and low odor, in Ceramic Grey, 1000g. Its title names 405nm curing, and it states suitability for all resin printers of the LCD, MSLA and DLP types.

Choose by project

  • Drilling or tapping: the Anycubic ABS-Like 3.0 listing names prints that require drilling or tapping, with Shore Hardness of 86D and elongation at break of up to 40%.
  • Miniature detail: the Anycubic Washable 2.0 listing states a precision of up to 0.15mm for miniature models.
  • Varied projects: the Elegoo Washable 2.0 listing names prototypes, figures, jewelry and mechanical parts.
  • General printing: the Elegoo Washable 405nm listing states suitability for LCD, MSLA and DLP printers with a tap water wash.

If the printer itself is still undecided, read best entry level resin printer before choosing a resin.

Water washable vs standard resin: the short version

  1. Choose water washable resin for a water wash with no alcohol or IPA step.
  2. Choose standard resin when a specific standard formula is required, and judge it on its own listing.
  3. Compare strength only on stated figures for the same formula.
  4. Check wavelength fit, especially the 365-405nm range stated for the Anycubic Washable 2.0 resin.
  5. Match the resin to the project: tough prints, miniature detail, varied projects or general printing.

FAQ: lasers and CNC

Can water washable resin be cleaned with tap water?

Yes, on the listings here: the Elegoo listings describe rinsing with clean water or tap water, and the Anycubic listings describe washing with water with no alcohol needed.

Does water washable resin work with any LCD printer?

The listings state wide compatibility, but check the stated range: the Anycubic Washable 2.0 listing states printers working within the 365-405nm wavelength, while the older Elegoo listing names 405nm.

Is water washable resin weaker than standard resin?

This guide’s listings state no head-to-head comparison with a standard formula, so judge strength on stated figures such as Shore Hardness of 86D and elongation at break of up to 40% for the Anycubic ABS-Like 3.0 resin.

Which resin suits miniature models?

The Anycubic Washable 2.0 listing states a precision of up to 0.15mm and aims at detail in miniature models, which makes it the detail pick in this guide.

Related: the resin 3D printer hub, FDM vs resin 3D printer and resin vs PLA for miniatures. Also see our best entry level resin printer. Also see our 3D printing resin vs UV resin.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.