Can a CO2 Laser Engrave Metal
A CO2 laser marks bare metal with a marking spray: coat the metal, dry it, and the beam bonds a mark to aluminum, stainless steel or brass.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Brilliance Laser Inks Black Metal Liquid-Ready Laser MarkingView on Amazon - 2
Sublimation Aluminum Metal Business Cards 50pcs 0.45mm PealView on Amazon - 3
Anodized Aluminium Metal Plate Etching Sheets 100X50mm GoldenView on Amazon - 4
PATIKIL 100 Pack Metal Business Cards BlankView on Amazon - 5
PATIKIL 15 Pack Metal Business Cards Anodized 0.8mm ThickView on Amazon - 6
PATIKIL 200 Pack Metal Business Cards BlankView on Amazon
A tumbler with a name on it, a tool with a serial number, a sign with a logo: can a CO2 laser engrave metal well enough to sell? Not on bare metal on its own. A CO2 machine needs a marking spray or powder to mark bare metal, and the sections below walk through how the coating works, which metals it suits and how to apply it step by step.
Other machines to compare
Brilliance Laser Inks Black Metal Liquid-Ready Laser MarkingCheck price on Amazon
Sublimation Aluminum Metal Business Cards 50pcs 0.45mm PealCheck price on Amazon
Anodized Aluminium Metal Plate Etching Sheets 100X50mm GoldenCheck price on Amazon
PATIKIL 100 Pack Metal Business Cards BlankCheck price on Amazon
PATIKIL 15 Pack Metal Business Cards Anodized 0.8mm ThickCheck price on Amazon
PATIKIL 200 Pack Metal Business Cards BlankCheck price on Amazon
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
A CO2 laser does not engrave bare metal directly. The mark comes from a marking spray or powder that bonds to the metal under the beam, and the beam alone leaves no dark mark on bare metal. A fiber laser marks bare metal without a coating, and OMTech states its spray gives more vivid designs with a fiber laser.
Step 1: How a CO2 laser marks metal
A CO2 beam passes over bare metal without leaving a dark mark, so the metal needs a coating that the beam can bond to the surface. The OMTech, JAOJAO and Brilliance sprays coat the metal with a thin layer that the beam turns into a mark where it hits, and the unmarked coating washes off with a rinse. The OMTech powder mixes with alcohol to make a spray that works the same way. WanKuMi states its spray enhances engraving effects and makes the marks more visible and durable. OMTech states its spray creates high contrast, permanent black designs on bare metals with a 25W and above CO2 laser engraver, and more vivid designs with a fiber laser. For the OMTech, JAOJAO and Brilliance sprays, the mark is a bonded coating on the surface, not a cut into the metal, so it suits names, logos, serial numbers and barcodes on finished pieces.
Step 2: Pick a marking spray or powder
Marking sprays come as aerosols, and marking powder comes as a dry agent that mixes with alcohol. OMTech lists its spray in 13 oz aerosol cans in 2, 3 and 4 piece packs, with a clog proof nozzle that leaves a thin and smooth coat. OMTech also lists a marking powder in a 4.1 fl. oz. pack: add 99% alcohol to the pre-marked lines, shake well to mix, and the result is 4.1 fl. oz. of spray. The powder packaging does not include alcohol, and the listing states to prepare an alcohol solution with a concentration greater than 90%. WanKuMi lists a 150 ml spray with a sponge brush and a wiping towel, and JAOJAO lists a 150 ml water based spray with a sponge brush. Brilliance lists a 12 oz copper tone red aerosol that marks copper red.
Step 3: Coat, dry and mark
Start with clean, bare metal, then coat it and let the coat dry before the beam runs. OMTech states its spray dries in under 5 minutes, or in only 2 minutes with a hot air blower, and the same drying time is stated for its powder. WanKuMi states to wait 5-10 minutes for the surface to dry fully before engraving. JAOJAO states to allow the coat to dry for 30-60 seconds, mark as normal, then wipe away residue with a clean cloth. Brilliance states to shake the spray for 2 minutes and spray from 6-8 inches away, then etch with the machine and rinse. For curved metal surfaces, WanKuMi states alignment with the print head is needed, or the product may not mark properly. After marking, rinse the unmarked excess off with water: OMTech, WanKuMi and JAOJAO all state a simple rinse leaves the mark behind.
Step 4: Which metals work
OMTech, WanKuMi and JAOJAO state the same core metals: aluminum, stainless steel and brass. OMTech states its fluid works with most metals including aluminum, stainless steel, brass, and many others, and its spray suits jewelry, tumblers and tools. Brilliance states its copper tone spray is formulated for uncoated stainless steel surfaces. WanKuMi states its spray also works on glass and ceramics, and JAOJAO states its spray also works on wood, acrylic, glass, ceramics, plastics, leather and stone. A fiber laser marks bare metal without a coating: OMTech states its spray gives more vivid designs with a fiber laser, and Brilliance states compatibility with fiber and YAG lasers at 10 Watt and diode lasers at 10 Watt. If the job is bare metal with no spray, a fiber machine marks the metal without a coating; see the fiber laser engravers and the CO2 laser cutters pages to compare the types.
Step 5: Stay safe while you mark metal
Marking metal still runs a laser, so the usual safety rules apply. Ventilate the room: exhaust fumes outdoors or use a filter designed for laser fumes, and see our fume extractor guide. Keep a suitable extinguisher within reach and never leave a running job unattended. Use eyewear only if its listing states an optical density and a wavelength range that matches your laser. Never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS: they can release harmful fumes and damage the machine. If you are buying a first machine, read how to choose a laser engraver before you pick a type.
Can a CO2 laser engrave metal: the short version
- Not on bare metal on its own: a CO2 laser needs a marking spray or powder.
- Use a 25W and above CO2 laser, as the OMTech listings state.
- Coat the metal, let it dry, mark it, then rinse the excess off.
- Aluminum, stainless steel and brass are the metals OMTech, WanKuMi and JAOJAO state.
- For bare metal with no coating, a fiber laser marks the metal without a spray.
FAQ: lasers and CNC
Can a CO2 laser engrave metal without marking spray?
Not on bare metal. OMTech and Brilliance state the spray works with a 25W and above CO2 laser, and the mark comes from the coating bonding to the metal under the beam. A fiber laser marks bare metal without a coating.
What wattage CO2 laser do I need to mark metal?
OMTech states 25W and above for its marking spray and powder. Brilliance states a 25 Watt minimum for CO2 lasers, and 10 Watt for fiber, YAG and diode lasers.
How long does marking spray take to dry?
OMTech states under 5 minutes, or 2 minutes with a hot air blower. JAOJAO states 30-60 seconds, and WanKuMi states 5-10 minutes.
Does the mark wash off?
OMTech, JAOJAO and Brilliance state permanent marks, and WanKuMi states durable marks. The unmarked excess washes off with a simple rinse. Brilliance states its spray marks copper red on stainless steel. A rinse leaves the mark behind.
Can I use marking spray on stainless steel?
Yes. OMTech lists stainless steel among the metals its spray works with, and Brilliance states its copper tone spray is formulated for uncoated stainless steel surfaces.
Can a fiber laser engrave metal?
Yes. OMTech states its spray gives more vivid designs with a fiber laser, and Brilliance states compatibility with fiber and YAG lasers at 10 Watt. A fiber laser marks bare metal without a coating, so it needs no spray for the job.
Related: the laser engraver hub, best laser engraver for small business and best laser engraver for wood. Also see our how to price laser engraving work. Also see our how much you can make with a laser engraver.




