Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best TPU Filament for Phone Cases (2026): 5 Picks for Flexible Cases

Five TPU filaments for phone cases, from a 1kg 95A spool with a 1 year warranty to a softer 85A spool and a four-color matte set, compared by hardness, spool size and print settings.

Best TPU Filament for Phone Cases (2026): 5 Picks for Flexible Cases
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1GIANTARM 95A TPU 1kgBest OverallGIANTARM 95A TPU 1kg9.5/10View on Amazon
  2. 2EONO3D Matte TPU SetBest Multi-Color SetEONO3D Matte TPU Set9.5/10View on Amazon
  3. 3Filajoy3D ChameleonBest Color-ShiftFilajoy3D Chameleon9.4/10View on Amazon
  4. 4IEMAI TPU 85A 1kgBest Soft PickIEMAI TPU 85A 1kg9.3/10View on Amazon

A phone case printed at home has a plain job: wrap the phone, take the knock, and still feel good in the hand. Too stiff and it cracks at the corner; too soft and it sags off the frame. That balance is why makers reach for TPU, and this guide compares the best TPU filament for phone cases from what each listing states, so the choice comes down to hardness, spool size and print settings rather than guesswork.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall GIANTARM 95A TPU 1kg: 95A TPU in a 1kg spool with a 1 year warranty, a stretch claim of 3 times its length and a tolerance of plus or minus 0.03mm. Check price on Amazon
  • Best Multi-Color Set EONO3D Matte TPU Set: Four matte colors in 250g spools, Shore 95A, with a low-gloss finish that helps hide layer lines. Check price on Amazon
  • Best Color-Shift Filajoy3D Chameleon: Chameleon green that shifts blue to purple with light and angle, Shore 95A, in a 250g spool with published print settings. Check price on Amazon
  • Best Soft Pick IEMAI TPU 85A 1kg: Softer 85A TPU in a 1kg spool for phone cases that need more give, with direct drive recommended. Check price on Amazon

Machines on the list

GIANTARM 95A Flexible TPU Filament 1.75mm, 1KG

GIANTARM 95A Flexible TPU Filament 1.75mm, 1KG

GIANTARM9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 95A TPU filament in a 1kg spool of clear blue, with a stretch claim of 3 times its original length, a tolerance of plus or minus 0.03mm and a 1 year warranty.

Pros

  • 1kg spool of 95A TPU, rated to stretch 3 times its original length
  • Diameter tolerance of plus or minus 0.03mm with CCD diameter measuring
  • Clog-free patent and complete drying for 24 hours before packaging
  • 1 year warranty and vacuum sealing with desiccants

Cons

  • No print speed or temperature range in the listing
  • Clear blue is the only color in this listing
  • No nozzle or bed temperature stated
  • 1kg spool is a large commitment for a color trial
EONO3D Matte TPU Filament 1.75mm

EONO3D Matte TPU Filament 1.75mm

EONO3D9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A four-color matte TPU set in 250g spools, Shore 95A, with a low-gloss finish that helps hide layer lines and rigid matte spools for stable feeding.

Pros

  • Four matte colors in 250g spools: green, yellow, purple and black
  • Low-gloss matte finish that reduces reflections and helps hide layer lines
  • Shore 95A, flexible and tear-resistant with abrasion resistance
  • Rigid matte spools for smooth unwinding and stable feeding

Cons

  • No warranty term in the listing
  • No diameter tolerance stated
  • No print speed or temperature range stated
  • 250g spools run out fast on a run of cases in the same color
Filajoy3D 95A Chameleon TPU Filament 1.75mm

Filajoy3D 95A Chameleon TPU Filament 1.75mm

Filajoy3D9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 95A chameleon TPU filament in a 250g spool, with a color-shift finish that moves blue to purple with light and angle and published print settings.

Pros

  • Chameleon finish shifts blue to purple with light and viewing angle
  • Published settings: nozzle range up to 250C, bed 30 to 60C, speed range from 30mm/s
  • Shore 95A (42D) with strong layer bonding and a smooth, bubble-free surface
  • 250g spool with an adapter available for Bambu Lab AMS

Cons

  • No warranty term in the listing
  • 250g spool suits small projects rather than a run of cases
  • Color is named green while the finish shifts blue to purple
  • AMS use needs an adapter, which is available rather than included
Lotactree Black TPU Filament 1.75mm 250g

Lotactree Black TPU Filament 1.75mm 250g

Lotactree9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A black 95A TPU filament in a 250g spool, with a diameter tolerance of plus or minus 0.03mm and vacuum-sealed packaging with desiccant.

Pros

  • Diameter tolerance of plus or minus 0.03mm for stable extrusion
  • Shore 95A with rubber-like elasticity, abrasion resistance and impact strength
  • Vacuum-sealed spool with desiccant for freshness
  • 250g spool suits a trial TPU print with no large commitment

Cons

  • No warranty term in the listing
  • No print speed or temperature range stated
  • Black is the only color in this listing
  • 250g spool runs out fast on a run of cases
IEMAI TPU 85A 3D Printer Filament 1.75mm

IEMAI TPU 85A 3D Printer Filament 1.75mm

IEMAI9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A softer 85A TPU filament in a black 1kg spool, with more elasticity than standard 95A TPU for phone cases, grips and protective covers that need more give.

Pros

  • 85A hardness is softer and more elastic than standard 95A TPU
  • 1kg spool for a run of cases in the same color
  • Strong layer adhesion with parts that bend and recover shape
  • Compatible with most 1.75mm FDM printers, including direct drive systems

Cons

  • No warranty term in the listing
  • Direct drive extruder recommended, which limits printer choice
  • No print speed or temperature range stated
  • Softer filament needs a slower speed and reduced retraction

Other machines to compare

Specs compared

Model HQ Score Hardness Diameter Spool Print speed Warranty
GIANTARM 95A TPU 1kg 9.5/10 95A 1.75mm 1kg Not stated 1 year
EONO3D Matte TPU Set 9.5/10 95A 1.75mm 4 x 250g Not stated Not stated
Filajoy3D Chameleon 9.4/10 95A (42D) 1.75mm 250g From 30mm/s Not stated
Lotactree TPU 95A 250g 9.4/10 95A 1.75mm 250g Not stated Not stated
IEMAI TPU 85A 1kg 9.3/10 85A 1.75mm 1kg Not stated Not stated

We give each product’s specs as its manufacturer rates them; listings read 3 November 2026.

How the picks were scored

Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
GIANTARM 95A TPU 1kg 9.5 30 21 21 0 2
EONO3D Matte TPU Set 9.5 29 21 20 0 0
Filajoy3D Chameleon 9.4 28 20 19 0 0
Lotactree TPU 95A 250g 9.4 27 19 19 0 0
IEMAI TPU 85A 1kg 9.3 27 19 18 0 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.

What the best TPU filament for phone cases listings actually offer

Every filament here is 1.75mm TPU, and every listing names phone cases as a use. The split is hardness: four of the five are Shore 95A, while the IEMAI spool is the softer 85A. For a case that needs to flex around a phone and spring back, the softer spool has the most give, while the 95A spools hold their shape with less sag. The listings also split on spool size, with the GIANTARM and IEMAI spools at 1kg and the Lotactree and Filajoy3D spools at 250g, while the EONO3D set holds four 250g spools in four matte colors.

Print settings are thin across the listings. Only the Filajoy3D listing publishes a nozzle range, a bed range and a print speed range, so the other listings leave temperature and speed to the maker’s own setup. Drying gets more attention: the GIANTARM listing states complete drying for 24 hours before packaging, the Filajoy3D listing states a 24-hour pre-drying process, and the Lotactree listing recommends drying before printing. TPU takes in moisture, and a damp spool strings and bubbles, so a dry box or a filament dryer for TPU is part of the workflow for phone cases that need a clean surface.

Buying guide: TPU filament for phone cases

Match hardness to the case

Shore 95A is the common pick for phone cases: firm enough to hold its shape, flexible enough to bend without breaking. The IEMAI 85A spool is softer and more elastic, which suits a case that needs more cushion and stretch, but the listing recommends a direct drive extruder and a slower speed, so it asks more of the printer.

Print settings that matter

The Filajoy3D listing is the only listing here to publish settings, with a nozzle range up to 250C, a bed range of 30 to 60C and a print speed range from 30mm/s. For the other spools, the listings state a diameter tolerance of plus or minus 0.03mm where published, which supports stable extrusion and strong layer adhesion. Start slow with a soft filament, reduce retraction, and keep the opening layer stuck before raising speed.

Drying and storage

TPU absorbs moisture from the air, and the listings that mention it agree on drying before printing. The Lotactree and Filajoy3D spools arrive vacuum-sealed with desiccant, and the GIANTARM spool is dried for 24 hours before packaging and vacuum sealed with desiccants. Store an open spool sealed and dry between prints, and dry it again if stringing or bubbles appear.

Spool size and color

A 1kg spool suits a run of cases in the same color, while a 250g spool suits a color trial or a small batch. The EONO3D set covers four matte colors at 250g each, and the Filajoy3D spool adds a chameleon finish that shifts blue to purple with light and angle. Matte finishes hide layer lines, which suits a case that will be seen up close every day.

Project Match

Typical phone case projects and the picks that fit them:

  • A daily-use case in the same color: the GIANTARM 1kg spool, with a 1 year warranty and a tolerance of plus or minus 0.03mm.
  • A set of cases in matching matte colors: the EONO3D four-color set, with 250g spools in matte green, matte yellow, matte purple and matte black.
  • A showpiece case with a color-shift finish: the Filajoy3D chameleon spool, which shifts blue to purple with light and angle.
  • A trial TPU print in a small spool: the Lotactree 250g spool, with a tolerance of plus or minus 0.03mm and vacuum-sealed packaging.
  • A soft, grippy case with more give: the IEMAI 85A spool, with direct drive recommended.

FAQ: lasers and CNC

What hardness TPU works for a phone case?

Shore 95A is the common hardness for phone cases, and four of the five filaments here are 95A. The IEMAI spool is 85A, which is softer and more elastic, and suits a case that needs more cushion, with a direct drive extruder recommended.

Is a direct drive extruder needed for TPU?

Not for every spool here: the listings for the 95A filaments do not call for direct drive. The IEMAI 85A listing recommends a direct drive extruder, a slower speed and reduced retraction, because the softer filament needs steadier feeding.

Should TPU filament be dried before printing phone cases?

The listings that mention drying say yes. Lotactree recommends drying before printing, GIANTARM dries its filament for 24 hours before packaging, and Filajoy3D states a 24-hour pre-drying process. A dry spool prints with less stringing and fewer bubbles, which matters for a case surface that stays visible.

What print speed works for TPU phone cases?

Only the Filajoy3D listing publishes a speed, with a range starting at 30mm/s. The other listings do not state a speed. The IEMAI listing recommends a slower speed for its softer 85A filament, and the EONO3D listing states support for faster speeds than standard TPU without giving a figure.

Related: best TPU filament under 25, best filament dryer for TPU, best matte black TPU filament and best PLA filament for 3D printers.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.