Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tool for Cleaning Filament Tubes (2026): 5 Kits Compared

Tool kits and a clog tool for clearing filament tubes and nozzles, compared by needles, brushes, PTFE tube size and printer fit.

Best Tool for Cleaning Filament Tubes (2026): 5 Kits Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TYJAN3D A1 61-PieceBest OverallTYJAN3D A1 61-Piece9.7/10View on Amazon
  2. 2OLYCRAFT 23-Piece KitBest Needle SetOLYCRAFT 23-Piece Kit9.6/10View on Amazon
  3. 3TYJAN3D AD5X KitBest for Flashforge AD5XTYJAN3D AD5X Kit9.6/10View on Amazon
  4. 4FUNUCURR Clog ToolBest Lone Clog ToolFUNUCURR Clog Tool9.5/10View on Amazon

A print that stops halfway, or a first layer that goes down thin and patchy, usually points at the same place: a nozzle or filament tube with residue inside. The best tool for cleaning filament tubes clears that path again, so the next print feeds cleanly. This guide compares 5 kits and tools for Bambu Lab, Flashforge and most other printers, by what each listing states about needles, brushes, PTFE tube size and fit.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall TYJAN3D A1 61-Piece: 61 pieces with 10 nozzle wipers, 5 silicone socks, 3 cleaning brushes, 5 cleaning needles at 0.4mm and a 1m PTFE tube, for Bambu Lab A1 and A1 Combo. Check price on Amazon
  • Best Needle Set OLYCRAFT 23-Piece Kit: 10 cleaning needles from 0.2mm to 0.4mm, 2 wire brushes, diamond files and tweezers in a 23-piece kit. Check price on Amazon
  • Best for Flashforge AD5X TYJAN3D AD5X Kit: Made for Flashforge AD5X with a 1m PTFE tube, 2.5mm ID and 4mm OD, plus nozzle brushes, needles and a clog poke. Check price on Amazon
  • Best Lone Clog Tool FUNUCURR Clog Tool: A 1.6mm chrome vanadium steel needle, 150mm long, with a wood handle and 2 extra needles, for clearing clogged nozzles without removing them. Check price on Amazon

Machines on the list

61-Piece 3D Printer Tool Kit for Bambu Lab A1/A1

61-Piece 3D Printer Tool Kit for Bambu Lab A1/A1

TYJAN3D9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 61-piece maintenance kit built for Bambu Lab A1 and A1 Combo, with nozzle wipers, silicone socks, cleaning needles, a clog poke, a 1m PTFE tube, wrenches, scrapers and files.

Pros

  • 61 pieces cover nozzle cleaning, clog removal, adjustment and model finishing
  • 5 silicone socks, 10 nozzle wipers and 3 cleaning brushes included
  • 1m PTFE tube with 2.5mm ID and 4mm OD for replacement
  • 5 cleaning needles at 0.4mm and a long clog poke for blockages

Cons

  • Built for Bambu Lab A1 and A1 Combo only
  • No warranty term stated
  • No stated needle sizes beyond 0.4mm
  • No storage case stated
OLYCRAFT 23PCS 3D Printer Tool 3D Printer Nozzle

OLYCRAFT 23PCS 3D Printer Tool 3D Printer Nozzle

OLYCRAFT9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 23-piece stainless steel tool kit with 10 cleaning needles from 0.2mm to 0.4mm, wire brushes, a flush cutter, diamond files and tweezers for cleaning 3D printer nozzles.

Pros

  • 10 cleaning needles from 0.2mm to 0.4mm for different nozzle sizes
  • Stainless steel putty knife, needles, flush cutters, diamond files and tweezers
  • 2 wire brushes and 2 tweezers included
  • Stated as compatible with most 3D printer nozzles

Cons

  • No PTFE tube stated
  • No warranty term stated
  • No stated use for the 5 graining burnishing tools
  • No stated clog poke
3D Printer Tool Kit for Flashforge AD5X

3D Printer Tool Kit for Flashforge AD5X

TYJAN3D9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A maintenance kit made for Flashforge AD5X, with nozzle brushes, cleaning needles, a clog poke, a 1m PTFE tube and repair tools for daily printer care.

Pros

  • Made for Flashforge AD5X daily maintenance
  • 1m PTFE tube with 2.5mm ID and 4mm OD for replacing worn feed tubing
  • Nozzle brushes, cleaning needles and a clog poke for filament buildup
  • Allen wrenches, screwdrivers, shear pliers and a multi-function wrench included

Cons

  • No piece count stated
  • No needle sizes stated
  • No warranty term stated
  • No stated silicone socks or nozzle wipers
3D Printer Tool Kit for Bambu Lab P2S/P2S Combo

3D Printer Tool Kit for Bambu Lab P2S/P2S Combo

SQWAN9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A maintenance kit built for Bambu Lab P2S and P2S Combo, with silicone socks, nozzle wiper blocks, cleaning needles, a clog cleaning rod, cutters and wrenches.

Pros

  • Built for Bambu Lab P2S and P2S Combo
  • Silicone socks, nozzle wiper blocks, cleaning needles and a long clog cleaning rod
  • Diagonal cutter, scraper handle with replacement blades, craft knife and spare blades
  • Hex keys, screwdrivers, small wrenches, tweezers and a multi-function wrench included

Cons

  • No piece count stated
  • No PTFE tube stated
  • No needle sizes stated
  • No warranty term stated
3D Printer Cleaning Filament Clog Tool with Wood

3D Printer Cleaning Filament Clog Tool with Wood

FUNUCURR9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A clog tool with a wood handle and a chrome vanadium steel needle, 1.6mm in diameter and 150mm long, with 2 extra cleaning needles and a PP storage case.

Pros

  • 1.6mm needle, 150mm long, precision-sized to match nozzle dimensions
  • Chrome vanadium steel construction with a wood handle
  • Clears clogged nozzles without nozzle removal
  • 2 extra cleaning needles and a PP storage case included

Cons

  • Narrow scope, a clog tool only
  • No PTFE tube stated
  • No warranty term stated

Other machines to compare

Specs compared

Model HQ Score Pieces PTFE tube Needles Made for Warranty
TYJAN3D A1 61-Piece 9.7/10 61 1m, 2.5mm ID x 4mm OD 5 x 0.4mm Bambu Lab A1, A1 Combo Not stated
OLYCRAFT 23-Piece Kit 9.6/10 23 Not stated 10 (0.2 to 0.4mm) Most 3D printers Not stated
TYJAN3D AD5X Kit 9.6/10 Not stated 1m, 2.5mm ID x 4mm OD Included Flashforge AD5X Not stated
SQWAN P2S Kit 9.5/10 Not stated Not stated Included Bambu Lab P2S, P2S Combo Not stated
FUNUCURR Clog Tool 9.5/10 3 Not stated 1.6mm dia, 150mm long Most 3D printers Not stated

We give each product’s specs as its manufacturer rates them; listings read 12 November 2026. Where a listing contradicts itself, both figures are shown.

What the listings tell you, and what they leave out

The 5 listings in this guide are tool kits and a clog tool, not spools of cleaning filament. 3 kits name the printer they fit: Bambu Lab A1 and A1 Combo, Flashforge AD5X, and Bambu Lab P2S and P2S Combo. 2 kits state a 1m PTFE tube with 2.5mm ID and 4mm OD. 3 listings give needle diameters, from 0.2mm to 1.6mm, and none states a warranty term.

The picks here are needles, brushes, pokes and a replacement PTFE tube for clearing the filament path, not spools of cleaning filament. Counts and sizes vary: the A1 kit lists every piece and size, while the AD5X and P2S kits state no counts at all.

Buying guide: the best tool for cleaning filament tubes

Needles and clog pokes

Needle sizes here run from 0.2mm to 1.6mm. The OLYCRAFT kit holds 10 needles from 0.2mm to 0.4mm, the A1 kit holds 5 needles at 0.4mm, and the FUNUCURR tool holds a 1.6mm needle that is 150mm long. The FUNUCURR listing states its needle is precision-sized to match nozzle dimensions, and that it clears clogs without nozzle removal. The A1 and AD5X kits and the SQWAN kit add a long clog poke or clog cleaning rod for residue around the nozzle.

PTFE tube size

Both TYJAN3D kits include a 1m PTFE tube with 2.5mm ID and 4mm OD. The AD5X listing states the tube suits replacing worn feed tubing and supporting stable filament feeding. The other listings state no PTFE tube, so check the box before ordering a replacement.

Printer fit

The A1 kit is built for Bambu Lab A1 and A1 Combo, the AD5X kit is made for Flashforge AD5X, and the SQWAN kit is built for Bambu Lab P2S and P2S Combo. The FUNUCURR clog tool and the OLYCRAFT kit are stated as compatible with most 3D printers and nozzle types, so check the model carefully before ordering, as the OLYCRAFT listing states.

Kit or lone tool

A kit covers nozzle cleaning, clog removal, adjustment and model finishing in one set: the A1 kit holds 61 pieces and the OLYCRAFT kit holds 23 pieces. A lone tool does one job: the FUNUCURR clog tool clears nozzles with a 1.6mm needle and comes with 2 extra needles and a PP storage case. Pick a kit for a bench that serves more than one printer, and a lone tool for a clog that keeps coming back.

Project Match

  • Bambu Lab A1 and A1 Combo owners: the TYJAN3D 61-piece kit, built for those printers.
  • Flashforge AD5X owners: the TYJAN3D AD5X kit, made for that printer.
  • Bambu Lab P2S and P2S Combo owners: the SQWAN kit, built for those printers.
  • Clearing a clogged nozzle: the FUNUCURR clog tool, with 2 extra needles and a storage case.
  • A bench kit for most printers: the OLYCRAFT 23-piece kit, stated as compatible with most 3D printer nozzles.

How the scores add up

Each tool is scored on performance, build, value, safety and warranty, and How we pick explains the weights. No listing states a safety certification or a warranty term, so no pick earns safety or warranty points.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TYJAN3D A1 61-Piece 9.7 32 22 22 n/a 0
OLYCRAFT 23-Piece Kit 9.6 29 21 21 n/a 0
TYJAN3D AD5X Kit 9.6 28 20 20 n/a 0
SQWAN P2S Kit 9.5 28 20 19 n/a 0
FUNUCURR Clog Tool 9.5 27 20 18 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

FAQ: lasers and CNC

What is 3D printer cleaning filament?

The picks in this guide are tool kits and a clog tool, not spools of filament: they clear nozzles and filament tubes with needles, brushes and a clog poke, and 2 kits include a 1m PTFE tube for replacement.

How do you use a clog tool?

Push the needle gently into the clogged nozzle to clear filament residue, without removing the nozzle, as the FUNUCURR listing states. The bayonet handle design lets the needle change quickly, and 2 extra needles come as backups.

What size PTFE tube comes in these kits?

Both TYJAN3D kits include a 1m PTFE tube with 2.5mm ID and 4mm OD. The other listings state no PTFE tube size.

Which printers do these kits fit?

The TYJAN3D 61-piece kit is built for Bambu Lab A1 and A1 Combo, the TYJAN3D AD5X kit is made for Flashforge AD5X, and the SQWAN kit is built for Bambu Lab P2S and P2S Combo. The FUNUCURR clog tool and the OLYCRAFT kit are stated as compatible with most 3D printers.

How do you clean a filament tube?

Clear the nozzle and tube path with the needles and clog poke in the kit, then replace a worn tube with the 1m PTFE tube where the kit includes one. The A1 kit includes 5 cleaning needles at 0.4mm and a long clog poke for filament residue and nozzle blockages.

Related: the 3D printers hub, 3D printer nozzle cleaning kit, 3D printer nozzle cleaning needles 0.4mm, PTFE tubing for Bowden 3D printer, 3D printing cleaning kit, tools to clean up 3D prints, 3D printer accessory kit and PTFE Teflon tubing.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.