Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best 3D Printer Nozzle Cleaning Needles 0.4mm (2026)

Nozzle cleaning needle kits compared by needle count, size, extras and length, with tweezers, brushes and storage from each listing.

Best 3D Printer Nozzle Cleaning Needles 0.4mm (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sliverdew 120 NeedlesBest OverallSliverdew 120 Needles9.6/10View on Amazon
  2. 2OXDFK 50 Needle KitBest Complete KitOXDFK 50 Needle Kit9.5/10View on Amazon
  3. 3AMERVAULT 10 NeedlesBest with TweezersAMERVAULT 10 Needles9.5/10View on Amazon
  4. 4TIEXYE 20 NeedlesBest Small PackTIEXYE 20 Needles9.4/10View on Amazon

A clogged nozzle stops a print mid-layer, and the fix is a needle that fits the bore. The best 3d printer nozzle cleaning needles 0.4mm clear the blockage without scratching the nozzle, and this guide compares the listings on the numbers each one states: needle count, needle size, extras, length and warranty.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Sliverdew 120 Needles: 120 stainless steel needles in 6 bottles of 20, with handles and a 0.4 mm size. Check price on Amazon
  • Best Complete Kit OXDFK 50 Needle Kit: 50 needles, 2 tweezers and a copper wire brush, with a heating step stated. Check price on Amazon
  • Best with Tweezers AMERVAULT 10 Needles: 10 needles and curved precision tweezers in a tube with a screw lid. Check price on Amazon
  • Best Small Pack TIEXYE 20 Needles: 20 needles, 80 mm total length, for V6, MK8, Ender 3 and Volcano nozzles. Check price on Amazon

Machines on the list

120 Pieces 3D Printer Nozzle Cleaning Needles

120 Pieces 3D Printer Nozzle Cleaning Needles

Sliverdew9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A kit of 120 stainless steel cleaning needles, 20 in each of 6 storage bottles, with smooth handles for a twist grip.

Pros

  • 120 needles in the pack, 20 in each of 6 storage bottles
  • Stainless steel needles are strong, flexible and bendable but not easy to break
  • Smooth handles are easy to grip and turn with a twist
  • Also suits throttle holes, feed gears and other hard-to-reach areas

Cons

  • No warranty term is stated
  • No needle length is stated
  • Size is stated as about 0.4 mm, not exact
  • No tweezers or brush is included
3D Printer Nozzle Cleaning Kit

3D Printer Nozzle Cleaning Kit

OXDFK9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A kit with 50 stainless steel 0.4 mm cleaning needles, 2 tweezers and a copper wire brush, with a heat-first cleaning step stated.

Pros

  • 50 needles plus 2 tweezers and a copper wire brush
  • Heating step is stated: heat the nozzle to 200 degrees or above first
  • Stainless steel needles with smooth, sharp tips
  • Fits most popular 3D printers, for beginners and professionals

Cons

  • No warranty term is stated
  • No needle length is stated
  • No storage case or bottle is stated
3D Printer Nozzle Cleaning Kit

3D Printer Nozzle Cleaning Kit

AMERVAULT9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A set of 11 with 10 stainless steel 0.40 mm needles and curved precision tweezers in a tube with a screw lid.

Pros

  • 10 needles and curved precision tweezers in one set of 11
  • Anti-static, non-magnetic tweezers for nozzle maintenance
  • Tube with a screw lid keeps needles and tweezers together
  • Flexible stainless steel needles for gentle maintenance

Cons

  • No warranty term is stated
  • Only 10 needles, the smallest count here
  • No needle length is stated
  • No nozzle fits are named
20Pcs 3D Printer Nozzle Cleaning Needles 0.4mm

20Pcs 3D Printer Nozzle Cleaning Needles 0.4mm

TIEXYE9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A kit of 20 stainless steel cleaning needles, 80 mm total length, for V6, MK8, Ender 3 and Volcano nozzles.

Pros

  • 20 needles with a stated total length of 80 mm
  • Shank 30 mm and bit 50 mm are both stated
  • Fits V6, MK8, Ender 3, MK10 and Volcano nozzles
  • Smooth surface without cutting thread, so it does not scratch the nozzle

Cons

  • No warranty term is stated
  • No tweezers or brush is included
  • Bendable range is stated as 0.2~0.4 mm while the needles are 0.4 mm

Other machines to compare

Specs compared

Model HQ Score Needles Needle size Extras Length Warranty
Sliverdew 120 Needles 9.6/10 120 0.4 mm Handles, 6 storage bottles Not stated Not stated
OXDFK 50 Needle Kit 9.5/10 50 0.4 mm 2 tweezers, copper wire brush Not stated Not stated
AMERVAULT 10 Needles 9.5/10 10 0.40 mm Curved precision tweezers Not stated Not stated
TIEXYE 20 Needles 9.4/10 20 0.4 mm Not stated 80 mm total Not stated

Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026.

How the picks were scored

Each pick is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. For nozzle needles, safety means stated features that keep the needle from snapping or scratching the nozzle, and a stated heating step before use. None of the listings state a warranty.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Sliverdew 120 Needles 9.6 30 21 21 3 0
OXDFK 50 Needle Kit 9.5 28 20 20 5 0
AMERVAULT 10 Needles 9.5 27 20 19 4 0
TIEXYE 20 Needles 9.4 26 19 19 3 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

What the listings tell you, and what they leave out

All 4 listings state 0.4 mm needles in stainless steel. Needle counts run from 10 to 120, and only the TIEXYE listing states a needle length. The OXDFK kit adds tweezers and a copper wire brush, the AMERVAULT set adds curved precision tweezers, and the Sliverdew pack adds smooth handles and storage bottles. 2 listings contradict their own spec tables on count: the OXDFK table lists 8 items against a title count of 50 needles plus tools, and the TIEXYE table lists 11 items against a title count of 20 needles. Trust the title and bullets over the spec table in both cases.

Buying guide: choosing the best 3d printer nozzle cleaning needles 0.4mm

Needle count and storage

Count decides how long the kit lasts. Sliverdew gives 120 needles, 20 in each of 6 storage bottles, which suits daily use and replacement needs. OXDFK gives 50 needles with tweezers and a brush. TIEXYE gives 20 needles. AMERVAULT gives 10 needles with tweezers in a tube with a screw lid, which keeps the set together between jobs.

Needle size and fit

All 4 listings state 0.4 mm needles, with Sliverdew stating about 0.4 mm/0.02 inch and AMERVAULT stating 0.40 mm. TIEXYE names the fits: V6, MK8, Ender 3, MK10 and Volcano nozzles, plus Creality CR-10, Prusa I3 and Anet A8 machines. Sliverdew and OXDFK state wide compatibility with most 3D printers. AMERVAULT names no fits. See our 3D printer nozzle size guide and our 3D printer sizes guide before matching a needle to a nozzle.

Extras: tweezers and brushes

The extras decide how much of the job the kit covers. OXDFK includes 2 tweezers and a copper wire brush alongside its 50 needles. AMERVAULT includes curved precision tweezers that are anti-static and non-magnetic, for nozzle maintenance and clearing excess support material. Sliverdew includes smooth handles on its needles and 6 storage bottles. TIEXYE includes needles only, with no tweezers or brush stated.

Heat before you poke

OXDFK states the cleaning step in full: heat the nozzle to 200 degrees or above, insert and remove the pin from the discharge port, and repeat until the printer discharges normally. The listing warns to prevent scalding. The other listings state no heating step.

Length and reach

Only TIEXYE states a needle length: 80 mm in total, with a shank of 30 mm and a bit of 50 mm. The other listings state no length, so their reach cannot be compared from the listings. For hard-to-reach areas, all 4 listings name feed gears, and Sliverdew adds throttle holes while TIEXYE adds the throat and the heatsink section.

Safety

Heat the nozzle before clearing it. The OXDFK listing recommends heating the nozzle to 200 degrees or above before use and warns to prevent scalding, so keep fingers clear of the hot end while the pin is in the nozzle.

Project Match

Pair the project with the pick that states it:

  • Clearing a blocked 0.4 mm nozzle: any pick, since all 4 state 0.4 mm needles.
  • Daily clearing with spares on hand: Sliverdew 120 Needles, with 120 needles in 6 bottles of 20.
  • A full maintenance kit: OXDFK 50 Needle Kit, with 2 tweezers and a copper wire brush.
  • Needles and tweezers in one tube: AMERVAULT 10 Needles, with a screw lid.
  • A stated length: TIEXYE 20 Needles, 80 mm in total.

FAQ: lasers and CNC

What size are these nozzle cleaning needles?

All 4 listings state 0.4 mm needles, with Sliverdew stating about 0.4 mm and AMERVAULT stating 0.40 mm. The size fits the 0.4 mm nozzles these kits are made for.

How many needles come in a pack?

Sliverdew gives 120 needles, OXDFK gives 50, TIEXYE gives 20, and AMERVAULT gives 10 needles with tweezers in a set of 11.

Do I need to heat the nozzle before cleaning it?

OXDFK recommends heating the nozzle to 200 degrees or above before use, then inserting and removing the pin until the printer discharges normally. The listing warns to prevent scalding. The other listings state no heating step.

What else comes in the kits?

OXDFK adds 2 tweezers and a copper wire brush. AMERVAULT adds curved precision tweezers in a tube with a screw lid. Sliverdew adds smooth handles and 6 storage bottles. TIEXYE adds no extras.

Which nozzles do these needles fit?

TIEXYE names V6, MK8, Ender 3, MK10 and Volcano nozzles, plus Creality CR-10, Prusa I3 and Anet A8 machines. Sliverdew and OXDFK state wide compatibility with most 3D printers. AMERVAULT names no fits.

Related: the 3D printer hub. Also see our 3D printer maintenance. Also see our best 3D printer bed adhesive. Also see our 3D printer filament types. Also see our 3D printer for car parts.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.