Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Colored 3d Printer Filament (2026): 5 Filaments Compared

5 colored 3d printer filaments for FDM printers, compared by color range, spool size, diameter accuracy and warranty.

Best Colored 3d Printer Filament (2026): 5 Filaments Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUNLU High Speed PLABest OverallSUNLU High Speed PLA9.8/10View on Amazon
  2. 23Dgenius Silk PLABest Tri-Color3Dgenius Silk PLA9.6/10View on Amazon
  3. 3ELEGOO Matte PLABest Matte FinishELEGOO Matte PLA9.6/10View on Amazon
  4. 4IEMAI Gradient PETGBest Gradient PETGIEMAI Gradient PETG9.6/10View on Amazon
  5. 5ELEGOO PLA 4KG BundleBest 4KG BundleELEGOO PLA 4KG Bundle9.6/10View on Amazon

A shelf of plain gray prints does nothing for an Etsy listing, and a gift that should pop in color comes out flat. Best colored 3d printer filament fixes that: PLA and PETG in matte, silk and gradient colors that print on most FDM printers. We compared 5 colored filaments by color range, spool size and diameter accuracy, so you can match the filament to the print.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall SUNLU High Speed PLA: 8 colors, 2kg total, high speed PLA, plus or minus 0.02mm. Check price on Amazon
  • Best Tri-Color 3Dgenius Silk PLA: 3 colors in one strand with a silk finish, 250g spool. Check price on Amazon
  • Best Matte Finish ELEGOO Matte PLA: 8 matte colors, 250g spools, low gloss with nearly invisible layer lines. Check price on Amazon
  • Best Gradient PETG IEMAI Gradient PETG: Blue-to-purple gradient PETG at up to 600 mm/s, 1kg spool. Check price on Amazon
  • Best 4KG Bundle ELEGOO PLA 4KG Bundle: 4kg across 4 spools in black, white, brown and beige. Check price on Amazon

Machines on the list

SUNLU High Speed PLA Filament Bundle, 8 Packs

SUNLU High Speed PLA Filament Bundle, 8 Packs

SUNLU9.8/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

8 packs of 250g high speed PLA in 8 colors, 1.75mm at plus or minus 0.02mm, with a 1 year after-sales service.

Pros

  • 8 colors in 8 spools of 250g
  • 1.5 times more fluid than ordinary PLA
  • 100% bubble-free, with no knotting
  • Fits all FDM 3D printers and SUNLU dryer boxes

Cons

  • 250g spools only, with no 1kg spool in the bundle
  • 140mm spool diameter, so check printer compatibility
  • Glossy finish, with no matte option in the bundle
  • Colors are standard hues, with no gradient or silk effect
3Dgenius Silk Triple Color PLA Filament 1.75mm

3Dgenius Silk Triple Color PLA Filament 1.75mm

3Dgenius9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Silk triple color PLA, 3 colors coextruded in one 1.75mm strand, 250g spool at plus or minus 0.03mm.

Pros

  • 3 colors in one strand: Rose Red, Sky Blue and Green
  • Silk-like metallic sheen that hides layer lines
  • Nozzle 190 to 235 degrees, bed 50 to 60 degrees
  • 24-hour deep drying before vacuum sealing

Cons

  • 250g spool only, with no larger spool
  • One bullet calls it a 1KG spool, against 250g in the title
  • Silk gloss only, with no matte option
  • Print speed of 30 to 60mm/s, below the IEMAI 600 mm/s
ELEGOO Matte PLA 3D Printer Filament Bundle 1.75mm

ELEGOO Matte PLA 3D Printer Filament Bundle 1.75mm

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Matte PLA bundle in 8 colors, 8 spools of 250g at 1.75mm, with a 30 days guarantee for any quality problems.

Pros

  • 8 matte colors in 8 spools of 250g
  • Matte, low gloss finish with nearly invisible layer lines
  • Neatly wound spools that prevent tangles
  • Vacuum sealed against dampness and air

Cons

  • Accuracy listed as plus or minus 0.02mm in the title and plus or minus 0.2 mm in the bullets
  • 30 days guarantee, shorter than the 1 year terms in this guide
  • Enclosed printers must print with the door open
  • 250g spools only, with no 1kg spool in the bundle
IEMAI High Speed PETG Filament 1.75mm

IEMAI High Speed PETG Filament 1.75mm

IEMAI9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Translucent blue-to-purple gradient PETG, 1.75mm at plus or minus 0.02mm, printing at up to 600 mm/s in a 1kg spool.

Pros

  • Blue-to-purple gradient with high light transmission
  • Prints at up to 600 mm/s
  • PETG toughness, strength, heat and impact resistance
  • Strong layer and bed adhesion

Cons

  • 1 color gradient only, with no solid colors
  • Needs drying at 70 degrees for 8 to 12 hours before printing
  • 30-Day Warranty, shorter than the 1 year terms here
  • Color varies with model size
ELEGOO PLA 3D Printer Filament Bundle 4KG

ELEGOO PLA 3D Printer Filament Bundle 4KG

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

PLA bundle in black, white, brown and beige, 4 spools of 1kg at 1.75mm and plus or minus 0.02mm accuracy.

Pros

  • 4kg across 4 spools of 1kg
  • Low warp and shrinkage, with strong layer adhesion
  • Vacuum sealed to protect from moisture
  • Fits most common 1.75mm FDM 3D printers

Cons

  • No warranty term is stated
  • 4 basic colors only: black, white, brown and beige
  • No matte, silk or gradient finish stated
  • No print speed stated

Other machines to compare

Specs compared

Filament HQ Score Type Colors Spool Diameter Warranty
SUNLU High Speed PLA 9.8/10 High Speed PLA 8 250g 1.75mm 1 year
3Dgenius Silk PLA 9.6/10 Silk PLA 3 250g 1.75mm 1 year
ELEGOO Matte PLA 9.6/10 Matte PLA 8 250g 1.75mm 30 days
IEMAI Gradient PETG 9.6/10 PETG 2 1kg 1.75mm 30 days
ELEGOO PLA 4KG Bundle 9.6/10 PLA 4 1kg 1.75mm Not stated

We give each product’s specs as its manufacturer rates them; listings read 12 November 2026. Where a listing contradicts itself, both figures are shown.

What the listings tell you, and what they leave out

We read 5 filament listings. 4 gave a warranty term, 2 gave a print speed, and 1 listed a spool diameter with hub hole and width. 2 listings contradict themselves: the ELEGOO Matte lists accuracy as plus or minus 0.02mm in the title and plus or minus 0.2 mm in the bullets, and the 3Dgenius lists 250g in the title and 1KG in one bullet.

All 5 filaments list a 1.75mm diameter, so the choice is the color, the material and the spool size.

Buying guide: best colored 3d printer filament

Color range first

Color range decides a colored filament. The SUNLU and the ELEGOO Matte list 8 colors each, the ELEGOO PLA lists 4 colors, the 3Dgenius lists 3 colors in one strand, and the IEMAI lists a blue-to-purple gradient. Match the colors to the print, and keep a spool of black and white for everyday parts.

PLA or PETG

PLA prints with low warp and a lower printing temperature, and the ELEGOO PLA lists low warp and shrinkage. PETG adds toughness and heat resistance, and the IEMAI lists toughness, strength, heat resistance and impact resistance. Pick PLA for display prints and PETG for parts that need toughness.

Spool size and diameter

All 5 filaments list a 1.75mm diameter, so any of them fits a 1.75mm FDM printer. Spool size decides how much color you get: the ELEGOO PLA lists 4 spools of 1kg, the SUNLU lists 8 spools of 250g, and the 3Dgenius lists a 250g spool. Check the spool diameter against the printer before the job: the SUNLU lists a 140mm spool diameter with a 53mm hub hole and a 36mm width. See our best petg filament storage picks for keeping spools dry.

Matte, silk or gradient finish

Finish decides how the print looks. The ELEGOO Matte lists a matte, low gloss finish with nearly invisible layer lines. The 3Dgenius lists a silk-like metallic sheen that hides layer lines. The IEMAI lists a translucent finish with high light transmission for lampshades and light diffusers. See our best matte pla filament bundle picks for more matte options.

Print settings from the listings

Nozzle temperature, bed temperature and print speed come from the listing, not from habit. The 3Dgenius lists a nozzle temperature of 190 to 235 degrees and a bed temperature of 50 to 60 degrees, with a print speed of 30 to 60mm/s. The IEMAI lists a nozzle temperature of 220 to 260 degrees, a hotbed temperature of 60 to 80 degrees, and a print speed up to 600 mm/s. Dry the IEMAI at 70 degrees for 8 to 12 hours before printing.

Project Match

  • Multi-color display prints: the SUNLU bundle with 8 colors, or the ELEGOO Matte bundle with 8 colors.
  • Silk-finish models that shift color: the 3Dgenius triple color PLA in Rose Red, Sky Blue and Green.
  • Lampshades, vases and light diffusers: the IEMAI translucent blue-to-purple gradient PETG.
  • Everyday parts in basic colors: the ELEGOO PLA bundle in black, white, brown and beige.
  • Small prints in many colors: the SUNLU 250g spools, or the ELEGOO Matte 250g spools.

How the scores add up

Each filament is scored on performance, build, value, safety and warranty. How we pick explains the weights. A spec the listing does not publish scores nothing. 4 filaments give a warranty term, and none states a safety certification.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
SUNLU High Speed PLA 9.8 32 22 22 n/a 3
3Dgenius Silk PLA 9.6 29 21 19 n/a 3
ELEGOO Matte PLA 9.6 29 21 21 n/a 2
IEMAI Gradient PETG 9.6 30 21 19 n/a 2
ELEGOO PLA 4KG Bundle 9.6 30 22 21 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.

FAQ: lasers and CNC

What diameter filament fits most FDM printers?

All 5 filaments here list a 1.75mm diameter, and each lists compatibility with most FDM 3D printers. Check the printer manual for the diameter before the job.

How much filament comes in a bundle?

The ELEGOO PLA lists 4kg across 4 spools, the SUNLU lists 2kg across 8 spools, and the 3Dgenius lists a 250g spool.

How to keep filament from clogging?

Keep the filament dry and vacuum sealed: the ELEGOO PLA is dried before packaging and vacuum sealed, and the 3Dgenius is vacuum-sealed with desiccants after a 24-hour deep drying process. Store spools dry between prints.

Can silk filament print on any FDM printer?

The 3Dgenius lists compatibility with most FDM 3D printers, including Ender, Bambu and Makerbot, with a nozzle temperature of 190 to 235 degrees and a bed temperature of 50 to 60 degrees. Follow the listed nozzle and bed temperatures for the filament.

Related: our 3d printers hub, the best multicolor 3d printer, the best matte 3d printer filament and the best wood colored filament. Also see our best petg filament white. Also see our best hygrometer for filament storage. Also see our best 3d printer accessory kit. Also see our laser cutter vs 3d printer.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.