Best Matte 3D Printer Filament Under $25 (2026)
5 matte PLA filaments in 1.75 mm and 1 kg spools under 25, compared by finish, diameter accuracy, winding and spool size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOVERTURE Matte White9.7/10View on Amazon - 2
Best for SettingsSUNLU Matte White9.6/10View on Amazon - 3
Best ToughnessDeeplee Navy Blue9.5/10View on Amazon - 4
Best for Enclosed PrintersELEGOO Sakura Pink9.6/10View on Amazon
A matte print hides layer lines and takes the shine off a model, which suits display pieces, prototypes and parts that should look finished straight off the bed. The best matte 3d printer filament under 25 is a spool of matte PLA, and this guide compares the listings on the details they state: finish, diameter accuracy, winding and spool size.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall OVERTURE Matte White: A 1 kg matte white spool with plus or minus 0.02 mm diameter accuracy, a 1-year warranty and a 1-year shelf life for unopened spools. Check price on Amazon
- Best for Settings SUNLU Matte White: A 1 kg matte white spool with plus or minus 0.02 mm accuracy, stated print settings and a reusable spool with stated spool dimensions. Check price on Amazon
- Best Toughness Deeplee Navy Blue: A 1 kg navy blue spool with plus or minus 0.02 mm accuracy and enhanced toughness for greater resistance to stretching and tearing. Check price on Amazon
- Best for Enclosed Printers ELEGOO Sakura Pink: A 1 kg sakura pink spool with plus or minus 0.02 mm accuracy whose listing says to keep the door open when printing in an enclosed printer. Check price on Amazon
Machines on the list

OVERTURE Matte PLA Filament 1.75mm
A 1 kg matte white spool with a frosted finish, plus or minus 0.02 mm diameter accuracy, a 1-year warranty and a 1-year shelf life for unopened spools.
Pros
- Plus or minus 0.02 mm diameter accuracy on 1.75 mm filament, checked by CCD diameter measuring and closed-loop adaptive control
- Frosted matte finish with a smooth surface that conceals layer lines
- No clogging, no bubbles, low odor and low shrinkage, with easy removal of rafts, brims and tree supports
- 1-year warranty and a 1-year shelf life for unopened spools with proper storage
Cons
- No print temperatures or speeds stated
- No spool dimensions stated
- Matte white is the only color in this listing
- No enclosed-printer guidance stated

SUNLU 1KG PLA Matte 3D Printer Filament 1.75mm
A 1 kg matte white spool with a frosted finish, plus or minus 0.02 mm diameter accuracy, stated print settings and a reusable spool with stated dimensions.
Pros
- Plus or minus 0.02 mm diameter accuracy on 1.75 mm filament
- Stated print settings: nozzle 200-230°C, bed 50-65°C, speed 50-100mm/s
- Frosted matte finish that conceals layer lines, with low warping and good layer bonding
- Reusable spool with stated dimensions: 8.00 in diameter, 2.50 in wide, 2.20 in hub hole
Cons
- No warranty term stated
- No shelf life stated
- Matte white is the only color in this listing
- No enclosed-printer guidance stated

ELEGOO Matte PLA Filament Sakura Pink 1KG
A 1 kg sakura pink spool with a matte, low-gloss finish, plus or minus 0.02 mm diameter accuracy and guidance for enclosed printers.
Pros
- Plus or minus 0.02 mm diameter accuracy on 1.75 mm filament
- Matte, low-gloss finish with nearly invisible layer lines
- Neatly wound spool, vacuum-sealed packaging, no clogging and no bubbling
- Enclosed-printer guidance stated: keep the door open when printing
Cons
- No warranty term stated
- No print temperatures or speeds stated
- No spool dimensions stated
- Sakura pink is the only color in this listing

DEEPLEE Matte PLA Filament 1.75mm 1kg Navy Blue
A 1 kg navy blue spool with a non-glossy matte finish, plus or minus 0.02 mm diameter accuracy and enhanced toughness for prototypes and models.
Pros
- Plus or minus 0.02 mm diameter accuracy on 1.75 mm filament
- Enhanced toughness for greater resistance to stretching and tearing
- Non-glossy matte finish that avoids glare, suited to prototypes, architectural models and decorative prints
- Neatly lined up, vacuum-sealed packaging, no clogging and no air bubbles
Cons
- No warranty term stated
- No print temperatures or speeds stated
- No spool dimensions stated
- Navy blue is the only color in this listing

ELEGOO Matte PLA 3D Printer Filament 1.75mm Black
A 1 kg black spool with a matte, low-gloss finish and a meticulously wound spool, but no stated diameter tolerance figure.
Pros
- Matte, low-gloss finish with nearly invisible layer lines
- Neatly wound spool, vacuum-sealed packaging, no clogs and no air bubbles
- Fits most common 1.75 mm 3D printers, in a variety of colors
- High-precision manufacturing and strict quality control for a consistent 1.75 mm diameter
Cons
- No diameter tolerance figure stated
- No warranty term stated
- No print temperatures or speeds stated
- No spool dimensions stated
Other machines to compare
ELEGOO Matte PLA 3D Printer Filament Matte Black 1KG 1.75mmCheck price on Amazon
SUNLU 1KG PLA Matte 3D Printer Filament 1.75mmCheck price on Amazon
YOOPAI PLA+ Matte 3D Printer Filament 1.75mmCheck price on Amazon
ERYONE Matte Rainbow 3D Printer PLA Filament 1.75 +/- 0.03mmCheck price on Amazon
RAMBERY Matte Rainbow 3D Printer Filament Matte PLA FilamentCheck price on Amazon
Specs compared
| Filament | HQ Score | Diameter | Finish | Winding | Spool | Warranty |
|---|---|---|---|---|---|---|
| OVERTURE Matte White | 9.7/10 | 1.75 mm, +/- 0.02 mm | Frosted matte, conceals layer lines | Not stated | 1 kg spool | 1-year warranty |
| SUNLU Matte White | 9.6/10 | 1.75 mm, +/- 0.02 mm | Frosted matte, conceals layer lines | Neatly wound | 1 kg reusable spool | Not stated |
| ELEGOO Sakura Pink | 9.6/10 | 1.75 mm, +/- 0.02 mm | Matte, low gloss, nearly invisible layer lines | Neatly wound | 1 kg spool | Not stated |
| Deeplee Navy Blue | 9.5/10 | 1.75 mm, +/- 0.02 mm | Non-glossy matte, avoids glare | Neatly lined up | 1 kg spool | Not stated |
| ELEGOO Matte Black | 9.5/10 | 1.75 mm, no tolerance stated | Matte, low gloss, nearly invisible layer lines | Meticulously wound | 1 kg spool | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026.
What the filament listings tell you
Only the OVERTURE listing states a warranty term, a 1-year warranty, and it is also the only one that states a shelf life, 1 year for unopened spools with proper storage. The ELEGOO black listing states a consistent 1.75 mm diameter but no tolerance figure, while the other listings state plus or minus 0.02 mm. The SUNLU listing is the only one that states print settings and spool dimensions.
Best Matte 3D Printer Filament Under 25: How to Choose
Matte finish
Every listing here states a matte, low-gloss finish. The OVERTURE and SUNLU listings describe a frosted texture that conceals layer lines, and both ELEGOO listings describe nearly invisible layer lines. The Deeplee listing describes a fine texture and a non-glossy finish that avoids glare. See our 3d printer filament types guide for how PLA compares with other filaments.
Diameter accuracy
The OVERTURE, ELEGOO Sakura Pink, SUNLU and Deeplee listings state plus or minus 0.02 mm on 1.75 mm filament. The ELEGOO black listing states a consistent 1.75 mm diameter with no tolerance figure, so its accuracy is not stated in the same way.
Winding and spool
The ELEGOO Sakura Pink and SUNLU listings state neatly wound spools, the ELEGOO black listing states a meticulously wound spool, and the Deeplee listing states each roll is neatly lined up. The SUNLU listing states a reusable spool with an 8.00 in diameter, 2.50 in width and 2.20 in hub hole, and it is the only listing here that states spool dimensions.
Print settings
Only the SUNLU listing states print settings: a nozzle temperature of 200-230°C, a bed temperature of 50-65°C and a printing speed of 50-100mm/s. The other listings state no temperatures or speeds, so check the settings for your printer against the listing before printing. See our best 3d pla filament guide for more PLA picks.
Enclosed printers
The ELEGOO Sakura Pink listing says to keep the door open when printing ELEGOO Matte PLA in an enclosed printer. The other listings state no enclosed-printer guidance.
Print in a ventilated space and keep the printer away from flammable material. Store spools dry: the OVERTURE listing states a 1-year shelf life for unopened spools with proper storage, and the other listings state vacuum-sealed packaging.
Project Match
- Prototypes, architectural models and decorative prints: Deeplee Matte PLA Navy Blue, which the listing states suits prototypes, architectural models and decorative prints.
- Models, prototypes, miniatures and functional parts: OVERTURE Matte PLA White, which the listing states suits models, prototypes, miniatures or functional parts.
- Prints where layer lines should stay hidden: OVERTURE, SUNLU and both ELEGOO spools, which state a frosted or low-gloss finish that conceals layer lines or leaves nearly invisible layer lines.
- Enclosed printers: ELEGOO Matte PLA Sakura Pink, whose listing says to keep the door open when printing in an enclosed printer.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For matte PLA filament, safety points come from named safety features, and none of these listings state any.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OVERTURE Matte White | 9.7 | 32 | 22 | 21 | n/a | 3 |
| SUNLU Matte White | 9.6 | 30 | 21 | 21 | n/a | 0 |
| ELEGOO Sakura Pink | 9.6 | 29 | 20 | 20 | n/a | 0 |
| Deeplee Navy Blue | 9.5 | 29 | 20 | 19 | n/a | 0 |
| ELEGOO Matte Black | 9.5 | 27 | 19 | 19 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What is matte PLA filament?
Matte PLA is PLA filament with a frosted, low-gloss finish. All 5 listings here state a matte finish, and the OVERTURE and SUNLU listings describe a frosted texture that conceals layer lines.
Does matte PLA hide layer lines?
The OVERTURE and SUNLU listings state the frosted finish conceals layer lines, and both ELEGOO listings state nearly invisible layer lines. The Deeplee listing states a non-glossy finish that avoids glare.
What diameter tolerance do these filaments state?
The OVERTURE, ELEGOO Sakura Pink, SUNLU and Deeplee listings state plus or minus 0.02 mm on 1.75 mm filament. The ELEGOO black listing states a consistent 1.75 mm diameter with no tolerance figure.
What print settings does the SUNLU listing recommend?
A nozzle temperature of 200-230°C, a bed temperature of 50-65°C and a printing speed of 50-100mm/s. The other listings state no temperatures or speeds.
Which of these listings states a warranty?
Only the OVERTURE listing states a warranty term, a 1-year warranty. The other listings state no warranty term.
Related: best 3d pla filament, 3d printer filament types, best 3d filament for strength, best 3d printer filament for outdoor use, 3d printer maintenance, anycubic pla vs elegoo pla and the 3D printers hub.




