Best Magnetic Markers for 3d Scanner Under $30 (2026)
Five magnetic marker sets for 3D scanners, compared by dot size, count, reflective coating and grip on metal and other surfaces.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallRosjoy 500-Dot Combo9.7/10View on Amazon - 2
Best Two-Size SetKingdder 300-Piece Set9.6/10View on Amazon - 3
Best for Large ObjectsRevopoint 10 mm Set9.5/10View on Amazon - 4
Best Multi-AngleKingdder 13-Side Set9.5/10View on Amazon - 5
Best 200-Piece SetFIMXSD 200-Piece Set9.6/10View on Amazon
A shiny car panel, a dark plastic housing or a smooth metal bracket can all defeat a scanner: with no features to lock onto, the scan drifts and the model comes back warped or full of holes. Reference markers fix that by giving the scanner bright, fixed points to follow, and the best magnetic markers for 3d scanner under $30 are the simplest way to add them: they grip metal, peel off cleanly and go back on for the next job.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Rosjoy 500-Dot Combo: 500 dots in 6 mm and 3 mm, mixing magnetic dots and adhesive stickers for metal and non-metal surfaces. Check price on Amazon
- Best Two-Size Set Kingdder 300-Piece Set: 300 magnetic dots in two sizes, with a reflective finish and a plastic storage box. Check price on Amazon
- Best for Large Objects Revopoint 10 mm Set: 10 mm magnetic markers on 4 sheets, with a multi-layer reflective coating for Revopoint Trackit scanners. Check price on Amazon
- Best Multi-Angle Kingdder 13-Side Set: 6 markers with 13 reflective 6 mm dots each, plus 100 6 mm dots, for scans from different angles. Check price on Amazon
- Best 200-Piece Set FIMXSD 200-Piece Set: 200 reusable magnetic dots in a clear organizer box, compatible with 3D scanning spray. Check price on Amazon
Machines on the list

Rosjoy 500 Dots 6mm & 3mm Magnetic 3D Scanning
A 500-dot combo across 10 sheets, mixing magnetic dots and adhesive stickers in 6 mm and 3 mm sizes, for metal and non-metal surfaces alike.
Pros
- 500 markers across 10 sheets: 300 of 6 mm and 200 of 3 mm
- Magnetic sheets grip ferrous metals and reposition for reuse
- Adhesive stickers hold on non-ferrous surfaces and peel off cleanly
- Professional-grade reflective material with a matte surface for bright workshops and dark surfaces
Cons
- The 3 mm dots are mostly adhesive stickers: 150 stickers against 50 magnetic dots
- PET/PVC build is a consumable format rather than a hard marker
- No stated compatibility with a named scanner brand
- No warranty term in the listing

300 Pcs 3D Magnetic Scanner Marker
A 300-piece set of magnetic scanning dots in two sizes, with soft magnets, a reflective black-and-white finish and a plastic storage box.
Pros
- 300 dots in the box: 100 with a 3 mm inner diameter and a 6 mm outer diameter, and 200 with a 6 mm inner diameter and a 10 mm outer diameter
- Soft magnets grip metal surfaces and peel off for reuse
- Highly reflective material for scan registration accuracy
- Two sizes cover fine detail and larger areas in one pack
Cons
- Magnetic grip only: no adhesive option for non-metal surfaces
- No sheet format: loose dots need the box for storage
- No stated compatibility with a named scanner brand
- No warranty term in the listing

200PCS 3D Scanner Markers
A 200-piece set of magnetic dots with a 6 mm inner diameter and a 10 mm outer diameter, in a clear plastic organizer box, made for reuse on metal surfaces.
Pros
- 200 pieces with a 6.0 mm inner diameter and a 10 mm outer diameter
- Soft magnetic material grips metal without slipping and leaves no residue
- Highly reflective black-and-white diffuse reflection pattern
- Compatible with 3D scanning spray for difficult surfaces
Cons
- One size only: no smaller dots for fine detail
- No adhesive option for non-metal surfaces
- No stated compatibility with a named scanner brand
- No warranty term in the listing

Revopoint 10 mm 3D Scanning Magnetic Markers
A 100-marker set of 10 mm magnetic dots on 4 sheets, with a multi-layer reflective coating and a magnetic base made for Revopoint Trackit scanners.
Pros
- 10 mm inner diameter and 13 mm outer diameter suit large-scale scanning
- Multi-layer reflective coating for reliable detection in low light
- Magnetic base attaches to metal and removes without residue
- Made for Revopoint Trackit 3D scanners
Cons
- Only 100 markers, the smallest count in this guide
- Optimised for one scanner brand, so less flexible across brands
- No adhesive option for non-metal surfaces
- No warranty term in the listing

Kingdder 6 Pcs Magnetic 3D Scanning Markers 100
A multi-angle set with 6 markers carrying 13 reflective 6 mm dots each, plus 2 sheets of 100 6 mm dots, with a magnet at the base of each marker.
Pros
- Each multi-angle marker carries 13 highly visible 6 mm reflective dots
- Scans from different angles integrate, including from 90 degree angles
- Magnet at the bottom holds markers on metal objects such as cars and machinery
- Includes 2 sheets of 100 6 mm dots alongside the 6 multi-angle markers
Cons
- Only 6 multi-angle markers in the set
- The 100 dots are all one size, 6 mm
- No adhesive option for non-metal surfaces
- No warranty term in the listing
Other machines to compare
100 Pcs 3D Magnetic Scanner MarkerCheck price on Amazon
200 Pcs 3D Magnetic Scanner MarkerCheck price on Amazon
Kingdder 6 Pcs Magnetic 3D Scanning Marker 100 Point 6mm 3DCheck price on Amazon
Kingdder 6 Pcs Magnetic 3D Scanning Markers 100 Point 3mm 3DCheck price on Amazon
Kingdder 6 Pcs Magnetic 3D Scanner Markers 100 Point 6mm 3DCheck price on Amazon
Specs compared
| Model | HQ Score | Markers | Sizes | Base | Reflective | Storage |
|---|---|---|---|---|---|---|
| Rosjoy 500-Dot Combo | 9.7/10 | 500 | 3 mm and 6 mm | Magnetic and adhesive | Professional-grade, matte | 10 sheets |
| Kingdder 300-Piece Set | 9.6/10 | 300 | 3 mm and 6 mm | Soft magnets | Highly reflective | Plastic box |
| FIMXSD 200-Piece Set | 9.6/10 | 200 | 6 mm | Soft magnetic | Highly reflective | Clear organizer box |
| Revopoint 10 mm Set | 9.5/10 | 100 | 10 mm | Magnetic base | Multi-layer coating | 4 sheets |
| Kingdder 13-Side Set | 9.5/10 | 100 dots plus 6 markers | 6 mm | Magnet at bottom | 6 mm reflective dots | 2 sheets |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026.
What the marker listings tell you
Five listings went into this guide, and the counts spread wide: the packs hold 500, 300, 200 and 100 markers, with the multi-angle set adding 6 markers to 100 dots. Every listing leans on the same two ideas, a reflective surface the scanner can spot and a magnetic base that grips metal and peels off for reuse. A single listing, the Rosjoy combo, adds adhesive stickers for surfaces a magnet cannot grip, and a single set, the Revopoint set, names a scanner brand, its Trackit range. No listing states a warranty term.
Buying guide: best magnetic markers for 3d scanner under 30
Marker size
Inner diameter decides how much of the dot the scanner sees. The smallest dots here are 3 mm, in the Kingdder 300-piece set and the Rosjoy combo, and they suit small parts and tight curves. The 6 mm dots in the FIMXSD set, the Kingdder multi-angle set and the Rosjoy combo cover general work, while the Revopoint markers, at 10 mm inner diameter and 13 mm outer diameter, suit large objects. A set with two sizes covers both ends without a second purchase.
Magnetic or adhesive
Every set here uses magnets, and magnets only grip metal. The Kingdder 300-piece set, the FIMXSD set and the Revopoint set all state a magnetic base that grips metal and removes without residue, and the Kingdder multi-angle markers carry a magnet at the bottom for cars, electrical appliances and machinery. When the part is plastic, wood or resin, magnets will not hold, and the Rosjoy combo is the only set here that adds adhesive stickers for those surfaces, with 150 stickers in 6 mm and 150 in 3 mm.
Reflective coating
Markers work because the scanner can spot them, so the reflective layer matters as much as the magnet. The Kingdder 300-piece set and the FIMXSD set both state a highly reflective black-and-white finish, and the FIMXSD dots use a diffuse reflection pattern that the listing states improves contrast under white light and laser scanners. Revopoint states a multi-layer reflective coating that helps its markers read in low light, and Rosjoy states a professional-grade reflective material with a matte surface for bright workshops and dark surfaces. The Kingdder multi-angle markers carry 13 reflective dots of 6 mm on each marker, so the scanner can spot them from several angles.
Pack size and storage
Counts run from 100 markers to 500, and the right count depends on how many parts a scan needs covered at once. The Rosjoy combo holds 500 dots across 10 sheets, the Kingdder 300-piece set holds 300 dots in a plastic box, and the FIMXSD set holds 200 pieces in a clear plastic organizer box. The Revopoint set holds 100 markers on 4 sheets, and the Kingdder multi-angle set pairs 6 markers with 2 sheets of 100 dots. Sheets keep dots in order, while a box suits loose dots.
Matching markers to the scanner
Most markers here are generic, and the listings state they suit 3D scanners and white light scanners in general, plus reverse engineering and machine vision. The exception is the Revopoint set, which the listing states is fully optimized for Revopoint Trackit 3D scanners and engineered for large objects. When a listing names a scanner range, match it; when it does not, the dot size and the magnetic base matter more than the brand on the box. The best magnetic markers for 3D scanner guide covers the wider range.
Magnetic markers grip ferrous metal only. On plastic, wood or resin they will not hold, so use the adhesive stickers from a combo set instead.
Project Match
- Reverse engineering and quality inspection: Revopoint 10 mm Set, made for large objects and named for those uses.
- Large metal parts, cars and machinery: Kingdder 13-Side Set, with a magnet at the bottom of each marker.
- Mixed metal and non-metal surfaces: Rosjoy 500-Dot Combo, the only set with adhesive stickers as well as magnets.
- Everyday scanning and 3D printing preparation: Kingdder 300-Piece Set or FIMXSD 200-Piece Set, with two sizes or a single 6 mm size in a storage box.
How the scores add up
Each marker set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For markers, performance points come from the stated reflective coating and the sizes on offer, value points come from the count of markers in the pack, and build points come from the stated materials and storage. No listing states safety features or a warranty term, so safety and warranty add nothing to the scores here.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Rosjoy 500-Dot Combo | 9.7 | 30 | 21 | 22 | n/a | 0 |
| Kingdder 300-Piece Set | 9.6 | 29 | 21 | 21 | n/a | 0 |
| FIMXSD 200-Piece Set | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Revopoint 10 mm Set | 9.5 | 28 | 21 | 18 | n/a | 0 |
| Kingdder 13-Side Set | 9.5 | 27 | 20 | 19 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
FAQ: lasers and CNC
What size magnetic markers do 3D scanners need?
It depends on the part. The sets in this guide offer inner diameters of 3 mm, 6 mm and 10 mm: smaller dots suit small parts and fine detail, while 10 mm markers suit large objects. A two-size set covers both without a second purchase.
Do magnetic markers work on plastic or wood?
No. Magnets only grip metal, so a magnetic dot will not hold on plastic, wood or resin. The Rosjoy combo is the only set here that adds adhesive stickers for non-metal surfaces, with 150 stickers in 6 mm and 150 in 3 mm.
Can magnetic markers be reused?
Yes. The listings state that the dots peel off metal surfaces and go back on for the next scan, and the magnetic sheets in the Rosjoy combo reposition for reuse. Store them in the box or on their sheets between jobs.
What is the difference between magnetic markers and adhesive dots?
Magnetic dots grip metal and peel off for reuse, while adhesive dots stick to surfaces a magnet cannot hold and peel off cleanly. The Rosjoy combo is the only set here that includes both.
Do I need scanning spray with magnetic markers?
Not according to these listings. Markers alone give the scanner the reference points it needs, and the Kingdder 300-piece set and the FIMXSD set both state they work with 3D scanning spray.
Related: best magnetic markers for 3D scanner, best spray for 3D scanning, best matte spray for 3D scanning, best 3D scanner, best laser scanner for 3D printing and photogrammetry vs 3D scanner.




