Best Spray for 3D Scanning (2026): 5 Picks for Reflective, Transparent and Dark Surfaces
Five sprays for reflective, transparent, black and highly textured surfaces, compared by coating, scan window and cleanup.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAESUB Blue Spray9.6/10View on Amazon - 2
Best Thin CoatingRevopoint AB-P Spray9.6/10View on Amazon - 3
Best Large CanHXOGYUB Spray 500 ml9.4/10View on Amazon - 4
Best for 3DMakerpro Scanners3DMakerpro Spray9.4/10View on Amazon
A black plastic housing, a clear glass jar and a polished steel bracket share one problem at the scanner: glare and see-through surfaces leave holes in the scan. A thin matte coat turns those surfaces into something the scanner can read, and the best spray for 3D scanning is the one that coats evenly, holds through the scan, then leaves the surface clean.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall AESUB Blue Spray: Vanishing pigment-free coat about 8 to 15 microns thick, with about 1 to 2 hours of scanning time and no cleanup. Check price on Amazon
- Best Thin Coating Revopoint AB-P Spray: A coat of about 4.5 microns in a 500 ml can, semi-permanent until wiped, for the widest surface list here. Check price on Amazon
- Best Large Can HXOGYUB Spray 500 ml: 500 ml covering up to 15 sq ft, made of safety material the listing calls skin friendly and odorless. Check price on Amazon
- Best for 3DMakerpro Scanners 3DMakerpro Spray: Made for Seal and Moose handheld scanners, sprayed from 15 to 20 cm, with fast evaporation and no residue. Check price on Amazon
Machines on the list

AESUB blue 3D Scanning Spray, Vanishing
A 400 ml vanishing spray from Germany with a pigment-free matte coat about 8 to 15 microns thick, made for short scanning sessions.
Pros
- Vanishing coat needs no post-scan cleanup
- About 1 to 2 hours of scanning time, with complete sublimation after about 4 hours
- Coat about 8 to 15 microns thick for an even matte layer
- Pigment-free formula helps prevent deposits on scanners and nearby equipment
Cons
- Only about 1 to 2 hours of scanning time per coat
- No surface list is stated
- No warranty term is stated
- 400 ml can is smaller than the 500 ml cans here

Revopoint 3D Scanning Spray for 3D Scanners AB-P
A 500 ml semi-permanent spray with a thin coat of about 4.5 microns, made for reflective, transparent, black and highly textured surfaces.
Pros
- Thin coat of about 4.5 microns preserves surface detail
- 500 ml can, the largest size in this guide
- Names the widest surface list here: textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper
- Semi-permanent coat stays on the surface until wiped or washed off
Cons
- Coat must be wiped or washed off after scanning
- Listing warns all scanning sprays contain solvents
- No scan window is stated
- No warranty term is stated

3D Scanning Spray, for 3D Scanner, for Reflective
A 500 ml spray that covers up to 15 sq ft, made of safety material the listing calls skin friendly and odorless.
Pros
- 500 ml can covers up to 15 sq ft
- Made of safety material the listing calls skin friendly and odorless
- Covers transparent, reflective and highly textured items
- Easy to clean after scanning
Cons
- No coating thickness is stated
- No scan window is stated
- No warranty term is stated
- Brand gives no scanner compatibility list

3DMakerpro 3D Scanner Scanning Spray
A 400 ml fast-evaporating spray for transparent, black and reflective surfaces, made for 3DMakerpro Seal and Moose handheld scanners and other brands.
Pros
- Names 3DMakerpro Seal and Moose handheld scanners, plus other brands
- Spray from 15 to 20 cm, then scan
- Fast evaporating with no residue and no cleaning
- 400 ml can covers medium-sized objects, per the listing
Cons
- No coating thickness is stated
- No scan window is stated
- No warranty term is stated
- 400 ml can is smaller than the 500 ml cans here

3D Scanning Spray for 3D Scanners
A 400 ml blue spray with a self-evaporating formula that disappears within a few hours, made for transparent and reflective surfaces.
Pros
- Self-evaporating formula disappears within a few hours, with no cleaning
- Ultra-thin uniform coating for glass, metals and plastics
- Made for structured light scanners, laser scanners and photogrammetry setups
- 400 ml blue spray for transparent and reflective surfaces
Cons
- No coating thickness is stated
- Disappears within a few hours with no stated scan window
- No warranty term is stated
- Brand gives no named scanner compatibility
Other machines to compare
Revopoint 3D Scanning Spray for 3D ScannersCheck price on Amazon
3D Scanning Spray for 3D ScannerCheck price on Amazon
3D Scanning Spray for 3D ScannersCheck price on Amazon
AESUB orange 3D Scanning SprayCheck price on Amazon
3D Scanning SprayCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Coating | Scan window | Cleanup | Surfaces |
|---|---|---|---|---|---|---|
| AESUB Blue Spray | 9.6/10 | 400 ml | About 8 to 15 microns | About 1 to 2 hours | Vanishes on its own | Not stated |
| Revopoint AB-P Spray | 9.6/10 | 500 ml | About 4.5 µm | Semi-permanent until wiped | Wipe or wash off | Textiles, wood, glass, metal, plastic, stone, paper |
| HXOGYUB Spray 500 ml | 9.4/10 | 500ML | Not stated | Not stated | Easy to clean | Glass, acrylic, stainless steel, metal |
| 3DMakerpro Spray | 9.4/10 | 400ml / 13Oz | Not stated | Not stated | No cleaning | Transparent, black, reflective |
| XWKJLIE Spray 400 ml | 9.3/10 | 400ml | Not stated | Disappears within a few hours | No cleaning needed | Glass, metals, plastics |
These numbers come straight from each maker’s listing and are rated, not measured by us (3 November 2026).
Most scanning sprays differ in how they leave the surface
All five sprays here do the same job, matting a surface a scanner cannot read, and the real difference is what happens after the scan. AESUB blue vanishes on its own, XWKJLIE disappears within a few hours, and 3DMakerpro dries fast and leaves no residue, while Revopoint AB-P stays put until wiped or washed off. The second difference is the coat itself: Revopoint states a coat of about 4.5 microns, AESUB blue states about 8 to 15 microns, and the other three listings do not state a coating thickness. Can size runs from 400 ml to 500 ml across the five, and only HXOGYUB states coverage, up to 15 sq ft.
Buying guide: best spray for 3d scanning
Match the spray to the surface
Start from the surface, not the can. Revopoint names the widest surface list here: textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper. HXOGYUB names glass, acrylic, stainless steel and metal. 3DMakerpro names transparent, black and reflective surfaces, and XWKJLIE names glass, metals and plastics. AESUB blue names no surfaces, so match it to the job by its vanishing coat and scan window instead.
Vanishing coat or wipe-off coat
A vanishing coat suits parts that must go straight back into use. AESUB blue gives about 1 to 2 hours of scanning time and sublimates completely after about 4 hours, XWKJLIE disappears within a few hours, and 3DMakerpro dries fast and leaves no residue. Revopoint AB-P is the opposite: a semi-permanent coat that stays on the surface until wiped or washed off, which suits long sessions and parts that can be cleaned after the scan.
Can size and coverage
Two cans here hold 500 ml, Revopoint AB-P and HXOGYUB, while AESUB blue, 3DMakerpro and XWKJLIE hold 400 ml. Only HXOGYUB states coverage, up to 15 sq ft, and 3DMakerpro states that its 400 ml can is enough to complete scanning of medium-sized objects. The other listings state no coverage figure, so compare cans by size and by the surfaces each one names.
Solvents and surface safety
Scanning spray is a solvent product, and the Revopoint listing warns that all scanning sprays contain solvents, so check material compatibility on a small hidden area before coating a finished piece. HXOGYUB describes its spray as safety material, skin friendly and odorless. AESUB blue is pigment-free, which helps prevent pigment deposits on scanners and surrounding equipment.
All scanning sprays contain solvents, according to the Revopoint listing. Check material compatibility on a small hidden area before coating a finished piece, and spray in a ventilated area away from open flame.
Project Match
Pair each project with the pick that fits the surface and the cleanup the job allows.
- Glass and acrylic parts: HXOGYUB, which names glass and acrylic, or XWKJLIE, which names glass and plastics.
- Black and reflective housings: 3DMakerpro, which names transparent, black and reflective surfaces.
- Mixed materials in one session: Revopoint AB-P, which names textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper.
- Short sessions with no cleanup: AESUB blue, which vanishes on its own after about 4 hours.
- Medium-sized objects on a 3DMakerpro scanner: 3DMakerpro spray, which names the Seal and Moose handheld scanners.
How the scores add up
Each spray is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| AESUB Blue Spray | 9.6 | 32 | 22 | 20 | 3 | 0 |
| Revopoint AB-P Spray | 9.6 | 30 | 21 | 20 | 4 | 0 |
| HXOGYUB Spray 500 ml | 9.4 | 26 | 19 | 20 | 4 | 0 |
| 3DMakerpro Spray | 9.4 | 28 | 20 | 20 | 0 | 0 |
| XWKJLIE Spray 400 ml | 9.3 | 26 | 19 | 19 | 0 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
How does 3D scanning spray work?
A scanning spray lays a thin matte coat over a surface a scanner cannot read, so the scanner sees a dull, even surface instead of glare or see-through material. The AESUB blue coat measures about 8 to 15 microns thick, and the Revopoint coat measures about 4.5 microns, so fine surface detail stays visible under the coat.
What does 3D scanning spray do?
It makes transparent, reflective, black and highly textured surfaces capturable by matting them. The Revopoint listing names textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper, and the 3DMakerpro listing names transparent, black and reflective surfaces.
How long does scanning spray stay on the surface?
It depends on the spray. AESUB blue gives about 1 to 2 hours of scanning time, with complete sublimation after about 4 hours. Revopoint AB-P is semi-permanent until wiped or washed off, and XWKJLIE disappears naturally within a few hours.
How do you make 3D scanner spray?
The listings in this guide sell ready-made sprays and do not describe a homemade mix. A purpose-made spray states its coating thickness and removal method, so start from the listings above rather than mixing a coating with no stated properties.
Related: best 3D scanner, best laser scanner for 3D printing, best 3D scanner for large objects, 3D scanner vs 3D printer and the 3D printers hub.




