Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Magnetic Markers for 3D Scanner (2026): 5 Picks for Tracking

Five magnetic marker sets for 3D scanners compared on dot size, magnet, kit contents and scanner fit, from 300 dot boxes to a marker block kit.

Best Magnetic Markers for 3D Scanner (2026): 5 Picks for Tracking
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Revopoint Block KitBest OverallRevopoint Block Kit9.7/10View on Amazon
  2. 2FIMXSD 300 DotsBest Dot PackFIMXSD 300 Dots9.6/10View on Amazon
  3. 3Lemecima 6 MarkersBest for Cars and MachinesLemecima 6 Markers9.5/10View on Amazon
  4. 4Kingdder 300 DotsBest Value DotsKingdder 300 Dots9.6/10View on Amazon

A scan of a bare metal part comes back patchy when the scanner has nothing to lock onto. The best magnetic markers for 3d scanner work give it reference points: reflective dots that stick to metal, hold still through the pass and peel off when the scan is done. This guide compares five marker sets on what each listing states: dot size, magnet strength, what comes in the box and which scanners they fit.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Revopoint Block Kit: 28 magnetic marker blocks plus 500 6 mm markers, built to stop tracking loss on small or complex objects. Check price on Amazon
  • Best Dot Pack FIMXSD 300 Dots: 300 magnetic dots, 6.0 mm inner and 10 mm outer, in a clear organizer box, reusable with no residue. Check price on Amazon
  • Best for Cars and Machines Lemecima 6 Markers: 6 magnetic markers with 11 reflective dots each and a strong magnet base for cars, machinery and appliances. Check price on Amazon
  • Best Value Dots Kingdder 300 Dots: 300 magnetic dots, 6.0 mm inner and 10 mm outer, in a plastic box, reusable for 3D printing work. Check price on Amazon

Machines on the list

Revopoint 28 Pieces 3D Marker Block Kit for 3D

Revopoint 28 Pieces 3D Marker Block Kit for 3D

Revopoint9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 28 piece marker block kit with 500 6 mm markers, built to stop tracking loss on small or complex objects.

Pros

  • 28 marker blocks: 10 ball, 10 dome, 4 pyramid and 4 bar markers
  • 500 6 mm markers included, with 6 mm inner and 10 mm outer size
  • Magnetic blocks, except the Bar, for easy attachment to metal surfaces
  • Names Revopoint scanners including POP, RANGE and MIRACO

Cons

  • No warranty term in the listing
  • Bar markers have no magnet, per the listing
  • Made for Revopoint scanners, so check fit for other brands
  • MINI and MINI 2 users must replace the markers themselves, per the listing
300PCS 3D Scanner Markers

300PCS 3D Scanner Markers

FIMXSD9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

300 magnetic dots, 6.0 mm inner and 10 mm outer, in a clear organizer box, with a black-and-white reflective pattern and no residue.

Pros

  • 300 magnetic dots with 6.0 mm inner and 10 mm outer size
  • Soft magnetic material that holds to metal without slipping
  • Black-and-white diffuse reflection pattern for white light and laser scanners
  • Reusable with no residue, and compatible with 3D scanning spray

Cons

  • No warranty term in the listing
  • No marker blocks or stands, dots only
  • No scanner brands named in the listing
  • No weight stated in the listing
300 Pcs 3D Magnetic Scanner Marker

300 Pcs 3D Magnetic Scanner Marker

Kingdder9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

300 magnetic dots, 6.0 mm inner and 10 mm outer, in a plastic box, with a black-and-white reflective pattern for 3D and white light scanners.

Pros

  • 300 magnetic dots with 6.0 mm inner and 10 mm outer size
  • Soft magnets with strong force for metal surfaces
  • Highly reflective black-and-white dots for scan registration accuracy
  • Reusable, in a handy plastic box

Cons

  • No warranty term in the listing
  • No marker blocks or stands, dots only
  • No scanner brands named in the listing
  • No weight stated in the listing
6 Pcs Magnetic 3D Scanning Markers with 100 6mm

6 Pcs Magnetic 3D Scanning Markers with 100 6mm

Lemecima9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6 magnetic markers with 11 reflective dots each, plus 100 6 mm dots on 2 sheets, with a strong magnet base and a PET surface.

Pros

  • 6 magnetic markers with a strong magnet base for metal surfaces
  • 11 highly reflective dots on each marker
  • 100 reflective 6 mm dots on 2 sheets included
  • Matte black PET surface, optimized for laser scanner recognition

Cons

  • No warranty term in the listing
  • Only 100 dots
  • No scanner brands named in the listing
  • Dots are 6 mm with no outer size stated
Kingdder 6 Pcs 3D Scanning Markers Set 100 Point

Kingdder 6 Pcs 3D Scanning Markers Set 100 Point

Kingdder9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 piece multi-angle marker set with 100 6 mm dots, whose title claims a magnetic base while its bullets state the markers have no magnet.

Pros

  • 6 multi-angle markers with 6 reflective 6 mm dots each
  • 100 6 mm dots on 2 sheets included
  • Designed for multi-angle scanning, including scans from 90 degree angles
  • Covers automotive, aerospace, machinery and manufacturing, per the listing

Cons

  • Bullets state the markers have no magnet, despite the title claiming a magnetic base
  • Cannot stick to metal objects, per the listing
  • No warranty term in the listing
  • Dots are 6 mm with no outer size stated

Other machines to compare

Best magnetic markers for 3d scanner: the picks side by side

Model HQ Score Dots Magnet Markers Fits Warranty
Revopoint Block Kit 9.7/10 500 x 6 mm Magnetic blocks 28 blocks Revopoint scanners None stated
FIMXSD 300 Dots 9.6/10 300 x 6.0 mm inner, 10 mm outer Soft magnet Dots only Metal surfaces None stated
Kingdder 300 Dots 9.6/10 300 x 6.0 mm inner, 10 mm outer Soft magnet Dots only Metal surfaces None stated
Lemecima 6 Markers 9.5/10 100 x 6 mm Magnetic base 6 markers Metal surfaces None stated
Kingdder 6 Markers 9.4/10 100 x 6 mm Not magnetic 6 markers Not stated None stated

Specifications are manufacturer stated, as published on each listing and collected 11 November 2026. Dot size is the inner reflective circle and the outer marker, as each listing states it.

What the listings tell you, and what they leave out

Every listing here states the dot size: 6.0 mm inner and 10 mm outer on the dot sets, and 6 mm dots on the marker kits. None of the listings states a warranty term or a safety certification. The listings disagree on the Kingdder multi-angle set: its title claims a magnetic base, while its bullets state the markers have no magnet and cannot stick to metal objects.

Treat the bullets as the authority where a listing contradicts itself, and check the markers on arrival before an important scan.

Buying guide: choosing magnetic markers for 3d scanning

Dot size

The dot sets here use an inner diameter of 6.0 mm and an outer diameter of 10 mm, and the marker kits use 6 mm dots. That size holds across all 5 sets. The FIMXSD listing also gives the sizes in inches, about 0.24 inches inner and about 0.39 inches outer.

Magnetic or not

A magnet only helps on metal. The Kingdder and FIMXSD dot sets use soft magnets that stick to metal surfaces, the Revopoint blocks have built-in magnets except the Bar, and the Lemecima markers have a strong magnetic base. The Kingdder multi-angle set is the exception: its bullets state the markers have no magnet and cannot stick to metal objects, so it does not hold to metal the way the others do.

Marker blocks vs loose dots

Loose dots stick straight to the part. Marker blocks are raised shapes: ball, dome and pyramid in the Revopoint kit, plus a bar, and the listing says the blocks prevent tracking loss on small or complex objects. The Revopoint kit lets you combine the blocks freely around or on the object, per the listing. The Lemecima markers carry 11 reflective dots each, and the Kingdder multi-angle markers carry 6 dots each on 6 sides.

Reflectivity and contrast

Scanners find the dots by contrast. The dot sets use a black-and-white diffuse reflection pattern, and the listings claim high reflectivity improves scan registration accuracy. The Lemecima markers use a high-contrast matte black PET surface with reflective dots, which the listing says is optimized for laser scanner recognition.

What the kit includes

The dot sets hold 300 magnetic dots in a box, the Revopoint kit holds 28 marker blocks plus 500 markers, and both marker sets hold 6 markers plus 100 dots on 2 sheets each. The Revopoint kit is the only kit that names the scanners it fits, listing Revopoint models including POP, POP 3, RANGE, MIRACO and MetroX.

Safety

Some 3D scanners use laser light, so follow the scanner maker’s eye safety guidance and never look into the scanner beam.

Project Match

  • Reverse engineering and quality control on metal parts: the Revopoint kit or the FIMXSD dots, which list reverse engineering, quality control, inspection and metrology between them.
  • Scanning cars, machinery and appliances: the Lemecima markers, with a strong magnetic base for metal surfaces such as cars, machinery and appliances.
  • Small or featureless objects that lose tracking: the Revopoint marker blocks, which the listing says prevent tracking loss on small or complex objects.
  • 3D printing workflow: the Kingdder 300 dots or the FIMXSD dots, both listed for 3D printing and 3D scanning.
  • Multi-angle scans from steep angles: the Kingdder 6 piece set, which claims to integrate scans from 90 degree angles, with the warning that its markers have no magnet.

How the scores add up

Each marker set is scored out of 10 on performance, build, value, safety and warranty, with the weights on our How We Pick page. Marker sets carry no safety certification to state, so every set here scores zero on safety, and none states a warranty term, so every set scores zero on warranty too; the ranking comes from performance, build and value.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Revopoint Block Kit 9.7 32 22 21 n/a 0
FIMXSD 300 Dots 9.6 29 21 21 n/a 0
Kingdder 300 Dots 9.6 29 20 21 n/a 0
Lemecima 6 Markers 9.5 28 20 19 n/a 0
Kingdder 6 Markers 9.4 23 18 18 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.

FAQ: lasers and CNC

What size dots do 3D scanners need?

The sets here use 6.0 mm inner and 10 mm outer dots, and the marker kits use 6 mm dots. The FIMXSD listing also gives the sizes in inches, about 0.24 inches inner and about 0.39 inches outer.

Do magnetic markers work on any surface?

No, only on metal. The dot sets use soft magnets that stick to metal surfaces, and the Lemecima markers have a strong magnetic base for cars, machinery and appliances. The Kingdder multi-angle markers have no magnet at all, per the listing, so they cannot stick to metal objects.

What is the difference between dots and marker blocks?

Dots stick flat to the part. Marker blocks are raised shapes, ball, dome and pyramid in the Revopoint kit, plus a bar, and the listing says they prevent tracking loss on small or complex objects. Blocks place tracking points around or on the object, while dots cover flat metal surfaces.

Can I reuse magnetic markers?

Yes, the listings say so. The Kingdder and FIMXSD dot sets peel off metal surfaces and go back in the box, and the FIMXSD listing adds that they leave no residue. The Revopoint blocks are reusable too, with built-in magnets except the Bar.

Do I need markers for every scan?

Not always. Markers help most on featureless, small or complex objects, where the Revopoint listing says they prevent tracking loss. A part with plenty of shape and surface detail may scan fine without them.

Related: the 3d printers hub, 3d scanner vs 3d printer, and 3d scanner vs iphone lidar.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.

3D Printer Accessories ·

How to Fix a Clogged Nozzle 3D Printer

Clear a clogged printer nozzle by heating it, using a sized cleaning needle, cleaning feed parts and checking extrusion before the next print.