Best Glue Stick for 3d Printer Build Plate (2026)
PVP glue sticks for 3D printer build plates compared by adhesion, cleanup, pack size and filaments, from 4-packs to a 12-pack.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOutus 12 Pack9.6/10View on Amazon - 2
Best for High HeatCreality Glue Stick 49.5/10View on Amazon - 3
Best OriginalCreality PVP 4 Pack9.5/10View on Amazon - 4
Best 6-PackTEQStone JT169.5/10View on Amazon
A tall print lifts at the corners halfway through, and a part pops off the bed before the first layer finishes. A thin coat of glue on the build plate holds the first layer down while the print runs, then washes off with water when the bed cools. This guide to the best glue stick for 3d printer build plate compares the listings by adhesion, cleanup, pack size and filaments, for PLA, ABS, PETG and more.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Outus 12 Pack: 12 sticks, more than 100 average prints per stick, non-toxic acid-free PVP and easy water cleanup. Check price on Amazon
- Best for High Heat Creality Glue Stick 4: Formaldehyde-free PVP with strong anti-warping adhesion at high temperatures and easy release after cooling. Check price on Amazon
- Best Original Creality PVP 4 Pack: Original Creality PVP sticks for PLA, ABS, PETG, PC, PA and TPU, with a lid to keep them from drying out. Check price on Amazon
- Best 6-Pack TEQStone JT16: 6 sticks at 36g each, with at least 600 prints per pack stated in the listing. Check price on Amazon
Machines on the list

Outus 12 3D Printer Glue Stick Hot Bed Adhesive
A 12-pack of PVP glue sticks, non-toxic and acid-free, with more than 100 average prints per stick stated and water cleanup after the bed cools.
Pros
- 12 sticks in the pack, the largest pack here
- More than 100 average prints per stick, per the listing
- Non-toxic and acid-free PVP with a high viscosity formula
- Cleans with water after the bed cools, with easy removal of prints
Cons
- No warranty term is stated
- No PA filament is listed; the range is PLA, ABS, PETG, PC and TPU
- No single-stick weight is stated, only the pack weight of 1.12 lb
- No low-temp or textured plate is named, unlike the Creality Glue Stick 4 listing

Creality 3D Printer Glue Sticks for Hot Bed
A 4-pack of formaldehyde-free PVP glue sticks from Creality, with strong anti-warping adhesion at high temperatures and easy release after cooling.
Pros
- Formaldehyde-free PVP with no harsh chemicals or unpleasant odors
- Strong anti-warping adhesion at high temperatures
- Prints release easily after cooling, without damaging the plate or model
- Water-washable with no sticky residue, and no solvents or scraping needed
Cons
- No warranty term is stated
- No print count per stick is stated
- No stick size or weight is stated
- 4 sticks is the smallest pack here

Creality 3D Printer Glue Sticks PVP Solid Glue
An original Creality 4-pack of PVP glue sticks for hot bed build plates, with low odor, water cleanup and a lid to keep the sticks from drying out.
Pros
- 100% original Creality official glue stick, per the listing
- PVP material with low odor during printing
- Stronger adhesion for a better first layer, with less warping
- Cleans with water after the bed cools, with a lid to prevent drying
Cons
- No warranty term is stated
- No print count per stick is stated
- No stick size or weight is stated
- 4 sticks is the smallest pack here

3D Printer Glue Sticks 6-Pack, 1.27oz Each
A 6-pack of PVP glue sticks at 36g each, with 100+ prints per stick stated, strong first-layer adhesion and water cleanup.
Pros
- 100+ prints per stick stated, with 6 sticks in the pack
- Strong grip prevents warping, shifting and bottom deformation
- Prints peel off easily once cooled, with no scraping
- PVP formula with no unpleasant smell, for indoor use
Cons
- No warranty term is stated
- Only 4 filaments are listed: ABS, PLA, PETG and TPU
- No stick dimensions are stated, only 36g per stick
- No low-temp or textured plate is named

TEQStone 3D Printer Glue Stick 6 Pack
A 6-pack of PVP glue sticks at 36g each, with at least 600 prints per pack stated, for ABS, PLA and PETG on PEI, glass and aluminum.
Pros
- At least 600 prints per pack stated in the listing
- Water-soluble formula, wipe with a damp cloth or rinse with water
- Stronger adhesion with less warping and easier removal
- Works on textured and smooth PEI, glass, aluminum and flexible surfaces
Cons
- No warranty term is stated
- Only 3 filaments are listed: ABS, PLA and PETG, the narrowest range here
- No stick dimensions are stated, only 36g per stick
- No lid is mentioned for keeping the sticks from drying out
Other machines to compare
Creality 3D Printer Glue Sticks for Hot Bed Warping ReducingCheck price on Amazon
Creality 3D Printer Glue Sticks PVP Solid Glue Sticks for 3DCheck price on Amazon
Outus 4 3D Printer Glue Sticks for Hot Bed PVP 3D PrinterCheck price on Amazon
Bambu Lab Glue Stick for 3D Printer Build PlatesCheck price on Amazon
3D Printer Glue SticksCheck price on Amazon
Specs compared
| Model | HQ Score | Pack | Stick | Filaments | Surfaces | Cleanup | Safety |
|---|---|---|---|---|---|---|---|
| Outus 12 Pack | 9.6/10 | 12 sticks | 0.78 x 4 inches | PLA, ABS, PETG, PC, TPU | Heated beds, aluminum, glass | Water | Non-toxic, acid-free |
| Creality Glue Stick 4 | 9.5/10 | 4 sticks | Not stated | PLA, ABS, PETG, PC, PA, TPU | Glass, PEI, PEO, textured, low-temp | Water | Formaldehyde-free |
| Creality PVP 4 Pack | 9.5/10 | 4 sticks | Not stated | PLA, ABS, PETG, PC, PA, TPU | Various bed surfaces | Water | Safe PVP, low odor |
| XZN 6-Pack | 9.5/10 | 6 sticks | 36g each | ABS, PLA, PETG, TPU | PEI, aluminum, glass | Water | PVP, no smell |
| TEQStone JT16 | 9.5/10 | 6 sticks | 36g each | ABS, PLA, PETG | PEI, glass, aluminum | Water | PVP, no odor |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Pack is the number of sticks in the pack.
How the picks are scored
Each stick is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing. Safety points come from the material claims the listing states, such as formaldehyde-free PVP or a non-toxic, acid-free formula.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Outus 12 Pack | 9.6 | 29 | 21 | 22 | 3 | 0 |
| Creality Glue Stick 4 | 9.5 | 30 | 21 | 20 | 3 | 0 |
| Creality PVP 4 Pack | 9.5 | 29 | 21 | 20 | 3 | 0 |
| XZN 6-Pack | 9.5 | 28 | 20 | 21 | 3 | 0 |
| TEQStone JT16 | 9.5 | 27 | 20 | 21 | 3 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
What the listings tell you, and what they leave out
The 5 glue stick listings in this guide all use PVP, and all 5 describe water cleanup, but only 3 state a print count per stick and none states a warranty term. 2 are Creality 4-packs, and 1 is a 12-pack. The listings name 6 filaments at the widest and 3 at the narrowest, and 3 state a stick size.
The listings agree on the workflow: apply a thin coat to the effective printing area only, print, let the bed cool, then wash the bed with water.
Buying guide: best glue stick for 3d printer build plate
Adhesion and warping
A glue stick adds grip between the first layer and the bed. The listings describe stronger adhesion, less warping and fewer printing errors, and the Creality Glue Stick 4 listing says prints release easily after cooling without damaging the plate or the model.
PVP and cleanup
All 5 sticks here are PVP, and all 5 listings describe water cleanup after the bed cools. The TEQStone listing says to wipe with a damp cloth or rinse with water, and the Creality listings say no sticky residue remains.
Pack size and prints per stick
Packs here hold 4, 6 or 12 sticks. The Outus listing says 1 stick lasts for more than 100 average prints, the TEQStone and XZN listings say 100+ prints per stick, and the TEQStone listing says a 6-pack covers at least 600 prints. The Creality listings state no print count.
Filaments and surfaces
The Creality sticks list the widest filament range, PLA, ABS, PETG, PC, PA and TPU. The TEQStone lists ABS, PLA and PETG only. For surfaces, the Creality Glue Stick 4 listing names glass, PEI, PEO, textured plates and low-temp plates, while the XZN listing names PEI sheets, aluminum plates, glass and carbon crystal glass. For more on filaments, see the 3D printer filament types guide.
Keeping a stick fresh
PVP sticks dry out with the lid off. The Creality PVP 4 Pack and Outus listings say to cover the lid immediately after each use to prevent the glue stick from drying out.
Glue sticks here are water-soluble PVP: let the bed cool, wash it with water, and keep the lid on so the stick does not dry out. The Creality Glue Stick 4 listing says no sticky residue remains and no solvents or scraping are needed.
Project Match
- PLA, ABS and PETG prints on glass or PEI: any pick here lists those filaments, and the Creality sticks add PC, PA and TPU.
- Large or tall prints that warp at the edges: the Creality Glue Stick 4 listing describes anti-warping adhesion at high temperatures, and the Outus listing states more than 100 average prints per stick.
- Frequent printing: the Outus 12-pack, with 12 sticks and more than 100 average prints per stick stated.
- School projects and crafts: the Creality PVP 4 Pack, Outus and XZN listings name school projects and crafts among the uses.
- First layer trouble on textured or low-temp plates: the Creality Glue Stick 4 listing names textured plates and low-temp plates.
FAQ: lasers and CNC
What does a glue stick do on a 3D printer build plate?
It adds adhesion between the first layer and the bed, so the print stays put and the edges do not lift or curl. The listings here describe stronger first-layer adhesion and less warping.
How do you apply a glue stick to a build plate?
Apply a thin, even coating to the effective printing area only; the listings say there is no need to coat the entire bed. The Outus listing suggests spreading it with a flat object such as a ruler or an ID card.
How do you clean glue stick off a build plate?
Wait for the bed to cool, then wash it with water. All 5 listings describe water cleanup, and the Creality listings say no sticky residue remains.
Does a glue stick work for PETG?
Yes, per the listings. The Creality sticks list PETG among PLA, ABS, PETG, PC, PA and TPU, and the XZN and TEQStone listings list PETG too.
How long does a glue stick last?
The Outus listing says 1 stick lasts for more than 100 average prints, and the TEQStone and XZN listings say 100+ prints per stick. The Creality listings state no print count.
Related: the best 3D printer bed adhesive, the best liquid glue for 3D printer build plate, glue stick vs hairspray for 3D printing, the best build plate for PETG, the best flexible build plate and the 3D printers hub.




