Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Liquid Glue for 3d Printer Build Plate (2026)

Liquid glues for 3d printer build plates, compared by bottle size, filament range, surfaces, release and cleanup.

Best Liquid Glue for 3d Printer Build Plate (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Creality Glue 80mLBest OverallCreality Glue 80mL9.6/10View on Amazon
  2. 2INDUSTRIAL BOY GlueBest Easy ReleaseINDUSTRIAL BOY Glue9.5/10View on Amazon
  3. 3Bambu Lab Liquid GlueBest for Bambu PrintersBambu Lab Liquid Glue9.5/10View on Amazon
  4. 4Wefuit Glue 60mLBest Wide CompatibilityWefuit Glue 60mL9.5/10View on Amazon

A print that lifts off the bed mid-print wastes filament, time and a good model. A warped corner ruins a part that looked fine on the first layer. The best liquid glue for 3d printer build plate adds grip while the bed is hot and lets go when the print cools, so the first layer stays down and the finished part comes off clean.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read the affiliate disclosure.

Quick picks

  • Best Overall Creality Glue 80mL: An 80mL bottle with odorless, non-toxic materials stated and a surface list from PEI to PC. Check price on Amazon
  • Best Easy Release INDUSTRIAL BOY Glue: Releases when the bed cools below 30°C, with a felt applicator and a 60ml bottle. Check price on Amazon
  • Best for Bambu Printers Bambu Lab Liquid Glue: Genuine Bambu Lab glue made for P1P, P1S and X1C plates. Check price on Amazon
  • Best Wide Compatibility Wefuit Glue 60mL: Listed for PLA, PETG, PET, ABS, ASA and TPU, with a valve applicator and a 60ML bottle. Check price on Amazon

Machines on the list

Creality Official 3D Printer Adhesive Glue 1PCS

Creality Official 3D Printer Adhesive Glue 1PCS

Creality9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 80mL official Creality glue for build plates, listed for PLA, PETG, ABS and ASA on PEI, PEO, PET, epoxy resin, glass and PC surfaces.

Pros

  • 80mL bottle, the largest size stated in this guide
  • Listed for PLA, PETG, ABS, ASA and more filaments
  • Sticks to PEI, PEO, PET, epoxy resin, glass and PC surfaces
  • Cleans with water or a damp cloth after printing

Cons

  • No warranty term is stated
  • No weight is stated
  • No applicator is described in the listing
  • No release temperature is stated
for Bambu Lab 3D Printer Adhesive Glue 60ML,Strong

for Bambu Lab 3D Printer Adhesive Glue 60ML,Strong

Wefuit9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60ML glue made for Bambu Lab printers, listed for PLA, PETG, PET, ABS, ASA and TPU on glass, PEI, PEO, PET, Buildtak and aluminum plates.

Pros

  • Listed for PLA, PETG, PET, ABS, ASA and TPU
  • Sticks to glass, PEI, PEO, PET, Buildtak and aluminum plates
  • Valve applicator spreads a thin, even coat
  • Water-soluble cleanup with water or a wet rag

Cons

  • No warranty term is stated
  • No weight is stated
  • Third-party glue, not a Bambu Lab product
  • No release temperature is stated
Liquid 3D Printer Bed Adhesive

Liquid 3D Printer Bed Adhesive

INDUSTRIAL BOY9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60ml liquid bed adhesive with a felt applicator, listed for PLA, ABS, PETG, TPU, ASA and composites, with release below 30°C.

Pros

  • Releases when the bed cools below 30°C
  • Felt gauze dauber lays down a thin, even layer
  • Listed for PLA, ABS, PETG, TPU, ASA and composites
  • One application lasts for multiple prints

Cons

  • No warranty term is stated
  • No weight is stated
  • The 60ml bottle is smaller than the 80mL Creality bottle
  • The unbreakable bond claim has no measured figure behind it
Bambu Lab Liquid Glue for Build Plate

Bambu Lab Liquid Glue for Build Plate

Bambu Lab9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Genuine Bambu Lab liquid glue for build plates, made for P1P, P1S and X1C printers, listed for PLA, ABS, PETG and more filaments.

Pros

  • Genuine Bambu Lab part made to OEM tolerances
  • Made for P1P, P1S and X1C printers
  • Listed for PLA, ABS, PETG and more filaments
  • Easy to apply and clean, per the listing

Cons

  • No warranty term is stated
  • No bottle size is stated
  • Fits only the P1P, P1S and X1C models
  • No applicator is described in the listing

Other machines to compare

Specs compared

Model HQ Score Size Filaments Surfaces Release Warranty
Creality Glue 80mL 9.6/10 80mL PLA, PETG, ABS, ASA and more PEI, PEO, PET, Epoxy Resin, Glass, PC After the plate cools Not stated
Wefuit Glue 60mL 9.5/10 60ML PLA, PETG, PET, ABS, ASA, TPU Glass, PEI, PEO, PET, Buildtak, aluminum When the print finishes Not stated
INDUSTRIAL BOY Glue 9.5/10 60ml PLA, ABS, PETG, TPU, ASA, composites Glass, PEI, spring steel Below 30°C Not stated
Bambu Lab Liquid Glue 9.5/10 Not stated PLA, ABS, PETG and more Cool Plate, High-Temperature Plate Not stated Not stated

We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Bottle size is the size stated on the listing.

What the listings tell you, and what they leave out

No listing in this guide states a warranty term. Only the Bambu Lab listing states a weight, at 0.18 lb. Bottle size is stated on the Creality, INDUSTRIAL BOY and Wefuit listings: 80mL, 60ml and 60ML. Only the INDUSTRIAL BOY listing states a release temperature, below 30°C. The Bambu Lab glue names PLA, ABS and PETG, while the INDUSTRIAL BOY glue names PLA, ABS, PETG, TPU, ASA and composites, and the Wefuit glue names PLA, PETG, PET, ABS, ASA and TPU.

Buying guide: best liquid glue for 3d printer build plate

Bottle size and how far it goes

Bottle size sets how many prints one bottle covers. The Creality bottle holds 80mL, while the INDUSTRIAL BOY and Wefuit bottles each hold 60ml. The Bambu Lab listing states no bottle size. Both the INDUSTRIAL BOY and Wefuit listings say a little goes a long way, with one application covering multiple prints. Match the bottle size to how often the printer runs.

Filaments and surfaces

Filament range decides which prints the glue holds. The Bambu Lab glue names PLA, ABS and PETG, the Creality glue names PLA, PETG, ABS and ASA, and the INDUSTRIAL BOY and Wefuit glues name TPU as well. Surface range matters as much: the Creality glue sticks to PEI, PEO, PET, epoxy resin, glass and PC, the Wefuit glue sticks to glass, PEI, PEO, PET, Buildtak and aluminum, and the INDUSTRIAL BOY glue sticks to glass, PEI and spring steel. The Bambu Lab glue is made for Cool Plate and High-Temperature Plate surfaces. Match the filament and surface lists to the printer and the plate in use.

Release and cleanup

Release decides how the finished part comes off the plate. The INDUSTRIAL BOY glue releases when the bed cools below 30°C, so the part pops off without scraping. The Creality glue releases after the plate cools, with less spatula work. Cleanup is water-based on the Creality, INDUSTRIAL BOY and Wefuit glues: the Creality glue cleans with water or a damp cloth, the INDUSTRIAL BOY glue washes off with warm water, and the Wefuit glue is water-soluble and cleans with water or a wet rag. The Bambu Lab glue is listed as easy to apply and clean.

OEM fit or third-party glue

Fit decides whether the glue matches the printer. The Bambu Lab glue is the genuine Bambu Lab part, made for P1P, P1S and X1C printers, and the maker asks buyers to verify the printer model before ordering. The Creality glue is the official Creality adhesive for all FDM printers. The Wefuit glue is made for Bambu Lab printers, but the brand is Wefuit, so it is a third-party glue rather than a Bambu Lab part. The INDUSTRIAL BOY glue names no printer brand and suits glass, PEI and spring steel beds.

Project Match

  • PLA parts on a Bambu Lab printer: the Bambu Lab Liquid Glue, made for P1P, P1S and X1C plates.
  • ABS and ASA parts that lift at the corners: the Creality glue, listed for PLA, PETG, ABS and ASA.
  • TPU parts: the INDUSTRIAL BOY glue or the Wefuit glue, both listed for TPU.
  • Glass, PEI or spring steel beds: the INDUSTRIAL BOY glue, listed for glass, PEI and spring steel beds.
  • High-speed printing: the Wefuit glue, listed for high-speed printing.

How the scores add up

Each glue is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Creality Glue 80mL 9.6 32 21 22 3 0
Wefuit Glue 60mL 9.5 29 19 20 3 0
INDUSTRIAL BOY Glue 9.5 30 20 21 0 0
Bambu Lab Liquid Glue 9.5 30 21 19 0 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.

FAQ: lasers and CNC

Does liquid glue work on a PEI build plate?

Yes. The Creality glue sticks to smooth and textured PEI, the INDUSTRIAL BOY glue suits PEI beds, and the Wefuit glue sticks to PEI plates. The Bambu Lab glue is made for Cool Plate and High-Temperature Plate surfaces instead.

How do you remove liquid glue from a build plate?

Wash it off with water. The Creality glue cleans with water or a damp cloth, the INDUSTRIAL BOY glue washes off with warm water, and the Wefuit glue is water-soluble and cleans with water or a wet rag. Let the plate cool first so the part releases.

Does liquid glue help with warping?

Yes, that is the job it is made for. The INDUSTRIAL BOY glue prevents warping, the Creality glue reduces warping and shedding, and the Wefuit glue stops warping and lifting. The Bambu Lab glue is listed for better bed adhesion. Apply a thin, even coat before the print begins.

Which filaments work with liquid build plate glue?

PLA, ABS and PETG work with every glue in this guide. The Creality glue adds ASA, the INDUSTRIAL BOY glue adds TPU, ASA and composites, and the Wefuit glue adds PET, ASA and TPU. Check the filament list on the listing before ordering.

Related: the 3d printers hub, best 3d printer bed adhesive, best super glue for 3d printing, and best 3d print removal tool. See also kapton tape vs painter tape for 3d printing.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.