Best Filament Storage Rack (2026): 5 Picks for FDM Printers
Five filament storage racks holding 20 to 80 spools of 1kg filament, compared by tiers, wheels, spool sizes and footprint.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAnrigeail 7-Tier Rack9.6/10View on Amazon - 2
Best for Print FarmsAnBaiMei 5-Tier Rack9.6/10View on Amazon - 3
Best Rolling CartJunarsoez Rolling Cart9.5/10View on Amazon - 4
Best DesktopSHASHIDI 2-Tier Rack9.5/10View on Amazon
Filament spools pile up fast. A few rolls of PLA for everyday prints, a spool of PETG for parts that need to hold up outdoors, a roll of TPU for flexible pieces, and suddenly the shelf is full and the next spool is leaning against the wall. A best filament storage rack keeps every spool visible, reachable and off the floor, so the next print starts with the material already in hand instead of a hunt through a cupboard.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Anrigeail 7-Tier Rack: A 7-tier rack holding 80 spools of 1kg filament, with adjustable shelf heights, wheels and 4 hooks. Check price on Amazon
- Best for Print Farms AnBaiMei 5-Tier Rack: A 5-tier rack holding 60 spools, with locking casters and adjustable tube spacing. Check price on Amazon
- Best Rolling Cart Junarsoez Rolling Cart: Holds 40 or more 1kg spools on 360-degree wheels, with tool-free assembly. Check price on Amazon
- Best Desktop SHASHIDI 2-Tier Rack: A 2-tier desktop rack that expands to 24.4 inches and holds 24 spools. Check price on Amazon
Machines on the list

Anrigeail 7-Tier 3D Printer Filament Storage Rack
A 7-tier rolling rack that holds 80 spools of 1kg filament, with adjustable shelf heights and 4 hooks for tools.
Pros
- Holds 80 spools of 1kg filament across 7 tiers, the largest capacity here
- Adjustable shelf height fits 500g, 1kg and 2kg spools
- Industrial wheels move the full rack without lifting
- 4 hooks keep cutters, scrapers and cables within reach
Cons
- No warranty term in the listing
- At 73.6 inches tall it needs clear vertical space
- Locking casters are not stated in the listing
- The listing does not state a per-tier weight limit

AnBaiMei 5-Tier 3D Printer Filament Storage Rack
A 5-tier rolling rack with locking casters that holds 60 spools of 1kg filament, with adjustable tube spacing for smaller spools.
Pros
- Holds 60 spools of 1kg filament, 12 per tier across 5 tiers
- Four 360-degree casters lock with a press for stationary stability
- Adjustable tube spacing fits 200g to 1kg spools
- Powder-coated heavy-duty steel tube frame
Cons
- No warranty term in the listing
- At 58.27 inches tall it needs clear vertical space
- The listing does not state a per-tier weight limit
- The listing does not name which filament types it holds

3D Printer Filament Storage Rack with Wheels
A two-tier rolling cart that holds 40 or more 1kg spools, with 360-degree swivel wheels and tool-free assembly.
Pros
- Holds 40 or more standard 1kg spools
- Four smooth 360-degree swivel wheels move it even when fully loaded
- Fits 250g to 1kg spools, so small and standard spools share one cart
- Tool-free assembly, ready in seconds per the listing
Cons
- No warranty term in the listing
- Only 2 tiers, so a large collection sits on two levels
- The listing does not state a per-tier weight limit

2 Tiers Expandable 3D Printer Filament Storage
A 2-tier expandable desktop rack that stretches to 24.4 inches and holds 24 standard filament spools.
Pros
- Expands to 62cm (24.4 inches) for a growing collection
- Holds up to 24 standard filament spools
- Adjustable rod spacing fits PLA, ABS, PETG, TPU and Nylon spools
- Anti-slip rubber feet keep it steady on a desk or shelf
Cons
- No warranty term in the listing
- Only 2 tiers, so capacity is limited beside the taller racks
- The listing does not state a weight limit

MAYJOY Desktop 3D Printer Filament Storage Rack
A 2-tier desktop rack with adjustable legs that holds 20 to 24 standard 1kg spools on a desk, shelf or workbench.
Pros
- Compact desktop size at 16.5 x 16.5 x 10.3 inches
- Four adjustable legs keep it level on any surface
- Supports up to 33 lbs (15 kg) per tier
- Assembles in under 10 minutes with clear instructions
Cons
- No warranty term in the listing
- Title promises 20 to 24 spools while the bullets say 6 per tier across 2 tiers
- Smallest capacity here, so a growing collection outgrows it first
- Rubber feet prevent scratches but the rack has no wheels
Other machines to compare
ARTINRACK 3D Printer Filament Rack for 84 Spools 7 TierCheck price on Amazon
2 Tier 3D Printer Metal Filament Storage Rack for 16 RollsCheck price on Amazon
3D Filament Dryer Rack for Bambu AMS/AMS 2 Pro & Anycubic ACECheck price on Amazon
Specs compared
| Model | HQ Score | Tiers | Capacity | Footprint | Wheels | Spool sizes | Warranty |
|---|---|---|---|---|---|---|---|
| Anrigeail 7-Tier Rack | 9.6/10 | 7 | 80 spools (1kg) | 13.8 x 33.5 x 73.6 in | Industrial wheels | 500g, 1kg, 2kg | Not stated |
| AnBaiMei 5-Tier Rack | 9.6/10 | 5 | 60 spools (1kg) | 18.0 x 15.75 x 58.27 in | Locking casters | 200g to 1kg | Not stated |
| Junarsoez Rolling Cart | 9.5/10 | 2 | 40+ spools (1kg) | 28.0 x 16.0 x 17.0 in | 360-degree swivel wheels | 250g to 1kg | Not stated |
| SHASHIDI 2-Tier Rack | 9.5/10 | 2 | 24 spools | 7.0 x 15.0 x 15.0 in | Not stated | Standard spools | Not stated |
| MAYJOY 2-Tier Rack | 9.5/10 | 2 | 20-24 spools (1kg) | 16.5 x 16.5 x 10.3 in | Not stated | 200g, 500g, 1kg | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026. Capacity is the number of 1kg spools the listing states each rack holds.
What the listings tell you, and what they leave out
We read 5 filament storage rack listings for this guide. None of the 5 stated a warranty term, so every warranty score here is zero. Three of the 5 roll on wheels or casters, and the other 2 sit on a desktop or shelf. All 5 state a spool capacity in the title, and the largest holds 80 spools of 1kg filament while the smallest holds 20 to 24.
Two listings disagree with themselves on size. The MAYJOY title and bullets promise 20 to 24 spools, then say 6 per tier across 2 tiers, a figure that does not match the headline number. The Junarsoez title says the cart is 16.5 inches wide, while its spec table lists 16.0 inches. Where a listing contradicts itself, the title and bullets win, and the review for that rack says so.
Buying guide: choosing the best filament storage rack
Capacity and tiers
Start with how many spools you own and how many you expect to own. The racks here hold from 20 to 24 spools up to 80 spools of 1kg filament, across 2, 5 or 7 tiers. A desktop rack suits a small collection beside one printer, while a tall rack with wheels suits a growing collection or a print farm where spools change often.
Rolling or desktop
Three of the 5 racks here roll on wheels or casters, which helps when the rack needs to move for cleaning or reorganisation. The AnBaiMei rack adds locking casters, so it stays put once it is in place. The two desktop racks use rubber feet instead, and the MAYJOY rack adds adjustable legs to stay level on uneven surfaces.
Spool sizes and spacing
Most racks here hold 1kg spools, and several also fit smaller spools. The Anrigeail rack takes 500g, 1kg and 2kg spools, the MAYJOY rack takes 200g, 500g and 1kg spools, and the Junarsoez cart takes 250g to 1kg spools. The AnBaiMei and SHASHIDI racks use adjustable spacing, so check the spool sizes each listing states before you buy.
What a rack will not do
A storage rack organises spools; it does not dry filament or seal it against humidity. Spools left on an open rack sit in room air, so filament that needs dry storage still needs a sealed container or a dryer between prints. Keep the rack away from damp corners and direct sun, and keep the spools you print with most often at arm height.
Project Match
Match the rack to the work you do most.
- Small home setup with one printer: a 2-tier desktop rack such as the MAYJOY or SHASHIDI keeps the spools you use most within reach of the printer.
- Growing collection or print farm: the Anrigeail 7-tier rack holds 80 spools of 1kg filament, and the AnBaiMei 5-tier rack holds 60.
- Shared workshop or classroom: the Junarsoez rolling cart holds 40 or more spools and moves on 360-degree wheels.
- Mixed spool sizes: the Anrigeail rack takes 500g, 1kg and 2kg spools, and the AnBaiMei rack adjusts spacing for 200g to 1kg spools.
How the scores add up
Each rack is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. Storage racks carry no laser safety features, so safety scores here reflect the absence of stated safety features rather than a laser rating.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Anrigeail 7-Tier Rack | 9.6 | 32 | 21 | 20 | n/a | 0 |
| AnBaiMei 5-Tier Rack | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Junarsoez Rolling Cart | 9.5 | 28 | 19 | 20 | n/a | 0 |
| SHASHIDI 2-Tier Rack | 9.5 | 26 | 20 | 20 | n/a | 0 |
| MAYJOY 2-Tier Rack | 9.5 | 26 | 19 | 19 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
FAQ: lasers and CNC
How many spools does a filament storage rack hold?
The racks in this guide hold from 20 to 24 spools up to 80 spools of 1kg filament. Count the spools you own now, leave room for the spools you expect to buy, and pick a rack with capacity to spare.
Do filament storage racks fit 2kg spools?
Only one rack here states it: the Anrigeail rack takes 500g, 1kg and 2kg spools. The other racks state 1kg spools or smaller, so check the spool sizes each listing states before you buy.
Can I store PLA and PETG on the same rack?
Yes. The racks here hold PLA, ABS, TPU, PETG and Nylon spools side by side, since a storage rack does not heat or dry the filament. Keep the spools you print with most often at the front.
Do I need wheels on a filament storage rack?
Wheels help when the rack moves for cleaning or reorganisation. Three of the 5 racks here roll on wheels or casters, and the AnBaiMei rack adds locking casters. A desktop rack with rubber feet suits a fixed spot beside the printer.
Does a storage rack keep filament dry?
No. An open rack organises spools but does not dry filament or seal it against humidity. Filament that needs dry storage still needs a sealed container or a dryer between prints.
Related: the enclosed 3d printer filament storage rack hub and our best PETG filament storage picks. Also see our best 3D printer spool holder, best 3D printer spool holder under 30, best 3D printer stand, best 3D printer cover, best 3D printer enclosure for Ender 3, best PLA filament for 3D printers, best 3D printer filament for outdoor use and best 3D printer for small business.




