Best Filament Storage Rack Under $50 (2026)
Five filament storage racks under 50 compared by spool capacity, tiers, footprint, wheels and build, for FDM printers in home studios and workshops.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Largest CapacityRazzi Fidel 9-Tier9.7/10View on Amazon - 2
Best Rolling CartAnBaiMei 4-Tier Rack9.5/10View on Amazon - 3
Tallest ValueKKONHII 9-Tier Rack9.5/10View on Amazon - 4
Best With Tool StorageMAYJOY 4-Tier Cart9.4/10View on Amazon - 5
Best Desktop RackDrevosly 2-Tier Rack9.3/10View on Amazon
Spools pile up on desks, shelves and workbenches, and a rack turns that pile into a shelf where every spool is visible and within reach. This guide compares filament storage racks for FDM printers in home studios, offices and workshops, and it names the best filament storage rack under 50 for makers who want capacity without a large footprint. Each rack below is scored on capacity, build, value, safety and warranty, from what its listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Largest Capacity Razzi Fidel 9-Tier: Up to 54 1kg spools across 9 tiers, with an anti-tip kit and a 2-year limited warranty. Check price on Amazon
- Best Rolling Cart AnBaiMei 4-Tier Rack: Up to 48 1kg spools on 4 double-row tiers, with adjustable spacing and 4 locking casters. Check price on Amazon
- Tallest Value KKONHII 9-Tier Rack: Up to 54 spools across 9 tiers with tool-free assembly and 2 spacing options. Check price on Amazon
- Best With Tool Storage MAYJOY 4-Tier Cart: 18 spools on tiers plus a 600D Oxford fabric top bin for tools, on lockable casters. Check price on Amazon
- Best Desktop Rack Drevosly 2-Tier Rack: 10 to 12 spools on 2 tiers with a 44 lb per-tier limit, sized for a desk or workbench. Check price on Amazon
Machines on the list

Razzi Fidel 9-Tier 3D Printer Filament Storage
A 9-tier modular rack that holds up to 54 1kg spools on carbon steel tubes, with tool-free assembly, an anti-tip kit and a 2-year limited warranty.
Pros
- Holds up to 54 1kg spools across 9 tiers, the largest capacity here
- Modular design builds to fewer tiers for a lower height
- Tool-free assembly with tube-and-connector joints
- Anti-tip kit included, and each tier supports up to 30 lb
Cons
- 80.7 inches tall when fully assembled, so it needs wall space
- Stationary storage: remove all spools before moving the rack
- Capacity varies with spool width and packaging
- Printable labels need a multi-color printer to use as designed

AnBaiMei 4-Tier 3D Printer Filament Storage Rack
A 4-tier double-row rolling rack that holds up to 48 1kg spools, with adjustable tube spacing and 4 locking casters.
Pros
- Holds up to 48 1kg spools, 12 per tier
- Adjustable tube spacing fits 200g to 1kg spools
- 4 360-degree casters with locks for rolling and parking
- Heavy-duty steel tubes with a powder-coated surface
Cons
- No warranty term in the listing
- No per-tier weight limit is stated
- No top bin or tool storage is stated

9-Tier Metal 3D Printer Filament Storage Rack
A 9-tier metal rack that holds up to 54 spools on 3 rods per tier, with 2 spacing options and tool-free assembly.
Pros
- Holds up to 54 spools across 9 tiers
- Each tier holds up to 6 1kg spools on 3 metal rods
- 2 spacing options fit 300g, 500g and 1kg spools
- Tool-free assembly with a 4-sided open design
Cons
- No warranty term in the listing
- No wheels or casters are stated
- No per-tier weight limit is stated

MAYJOY 3D Printer Filament Storage Rack
A 4-tier rolling cart that holds 18 standard 1kg spools plus 6 more in a 600D Oxford fabric top bin, with lockable casters.
Pros
- Holds 18 standard 1kg spools, 6 per row, plus 6 more in the top bin
- 600D Oxford fabric top bin stores tools and accessories
- Lockable industrial casters roll the loaded cart and hold it still
- 18 cm frame depth fits beside desks and workbenches
Cons
- No warranty term in the listing
- No per-tier weight limit is stated
- Slim 18 cm depth suits single-row storage only
- No adjustable tube spacing is stated

3D Filament Storage Rack
A 2-tier desktop rack that holds 10 to 12 standard 1kg spools on a steel frame, with adjustable feet and rubber pads.
Pros
- Holds 10 to 12 standard 1kg spools on 2 tiers
- Each tier supports up to 44 lb
- 17.7 by 10.4 by 16.9 inches, sized for desks and workbenches
- Assembles in 10 minutes with illustrated instructions
Cons
- Smallest capacity here at 10 to 12 spools
- Fixed rod spacing, not adjustable
- No warranty term in the listing
- No wheels or casters are stated
Other machines to compare
2 Tier 3D Printer Metal Filament Storage Rack for 16 RollsCheck price on Amazon
3D Filament Dryer Rack for Bambu AMS/AMS 2 Pro & Anycubic ACECheck price on Amazon
Specs compared
| Model | HQ Score | Capacity | Tiers | Footprint | Wheels | Warranty |
|---|---|---|---|---|---|---|
| Razzi Fidel 9-Tier | 9.7/10 | Up to 54 1kg spools | 9 | 80.7 x 16.7 x 11.8 in | Not stated | 2-year limited |
| AnBaiMei 4-Tier Rack | 9.5/10 | Up to 48 1kg spools | 4 | 18.0 x 15.75 x 46.45 in | 4 locking casters | Not stated |
| KKONHII 9-Tier Rack | 9.5/10 | Up to 54 spools | 9 | 16.5 x 12 x 80.7 in | Not stated | Not stated |
| MAYJOY 4-Tier Cart | 9.4/10 | 18 spools, 6 more in bin | 4 | 18 cm deep | Lockable casters | Not stated |
| Drevosly 2-Tier Rack | 9.3/10 | 10 to 12 1kg spools | 2 | 17.7 x 10.4 x 16.9 in | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026.
What the filament rack listings tell you
This guide is built from 5 filament rack listings. Only 1 stated a warranty term, and 2 stated locking casters. Two listings did not state a per-tier weight limit, and 1 gave spec table dimensions that do not match its title. Read the parts list, not just the title.
How to choose the best filament storage rack under 50
Capacity and tiers
Capacity runs from 10 to 12 spools on a 2-tier desktop rack to 54 spools on a 9-tier tower. The Razzi Fidel and the KKONHII hold up to 54 1kg spools across 9 tiers, the AnBaiMei holds up to 48 1kg spools across 4 double-row tiers, and the MAYJOY holds 18 standard 1kg spools on its tiers with 6 more in its top bin. Count the spools you own now, then leave room for the colors and materials you plan to add.
Footprint and wheels
Tall racks use little floor space: the Razzi stands 80.7 inches tall on a 16.7 by 11.8 inch footprint, and the KKONHII stands 80.7 inches tall on a 16.5 by 12 inch footprint. The AnBaiMei measures 18.0 by 15.75 by 46.45 inches and rolls on 4 casters that lock with a press. The MAYJOY has an 18 cm frame depth and lockable industrial casters, so it parks beside a desk or printer. The Drevosly measures 17.7 by 10.4 by 16.9 inches and sits on a desk, shelf or workbench. The Razzi is made for stationary storage, and its listing says to remove all spools before moving it.
Spool sizes and spacing
Most racks here take 200g, 500g and 1kg spools, and the Razzi also lists 300g spools. The AnBaiMei adjusts its tube spacing: narrow spacing fits 200g to 250g spools, and wide spacing fits 500g to 1kg spools. The KKONHII offers 2 spacing options on 3 rods per tier. The Drevosly uses fixed rod spacing that holds spools in place to prevent sliding and tangling. Check the spool sizes you own against the spacing before you buy.
Build and materials
Frames here are steel tube or metal pipe: the AnBaiMei uses heavy-duty steel tubes with a powder-coated surface, the Razzi uses carbon steel tubes with reinforced PP connectors, and the MAYJOY uses a reinforced black steel frame. Per-tier limits are stated on 2 racks: the Razzi supports up to 30 lb per tier, and the Drevosly supports up to 44 lb per tier. The MAYJOY top bin is 600D Oxford fabric, made for tools, accessories or extra spools.
Assembly and stability
The Razzi and the KKONHII assemble without tools, using tube-and-connector joints. The Drevosly assembles in 10 minutes with the included hardware and illustrated instructions. For stability, the Razzi includes an anti-tip kit and its listing says to place the rack against a wall. The Drevosly has adjustable feet that keep it steady on an uneven surface, with rubber pads that protect the desk. Locking casters on the AnBaiMei and the MAYJOY hold a parked cart still.
Project Match
Match the rack to the work:
- Print farm, classroom or maker space with dozens of spools: the Razzi Fidel or the KKONHII, each holding up to 54 spools on 9 tiers.
- Home studio that needs a rolling cart: the AnBaiMei, with 48 spools on locking casters, or the MAYJOY, with 18 spools plus a top bin for tools.
- Desktop or workbench with a small collection: the Drevosly, with 10 to 12 spools in a 17.7 by 10.4 by 16.9 inch frame.
- PLA, PETG, ABS, TPU and Nylon storage: the Razzi or the Drevosly, which both list those materials.
How the scores add up
Each rack is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For filament racks, safety points come from named features such as an anti-tip kit and locking casters.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Razzi Fidel 9-Tier | 9.7 | 32 | 22 | 21 | 4 | 3 |
| AnBaiMei 4-Tier Rack | 9.5 | 29 | 21 | 20 | 3 | 0 |
| KKONHII 9-Tier Rack | 9.5 | 30 | 20 | 20 | 0 | 0 |
| MAYJOY 4-Tier Cart | 9.4 | 26 | 20 | 19 | 3 | 0 |
| Drevosly 2-Tier Rack | 9.3 | 23 | 20 | 19 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
How many 1kg spools does a filament storage rack hold?
It depends on the tiers. The Drevosly holds 10 to 12, the MAYJOY holds 18 on its tiers, the AnBaiMei holds up to 48, and the Razzi and the KKONHII hold up to 54.
Do filament storage racks need wheels?
Not always. The AnBaiMei and the MAYJOY roll on locking casters, while the Razzi is made for stationary storage and its listing says to remove all spools before moving it.
What spool sizes fit these racks?
Most take 200g, 500g and 1kg spools, and the Razzi also lists 300g spools. The AnBaiMei and the KKONHII offer adjustable spacing for different spool sizes.
Can I store PLA, PETG, ABS and TPU on the same rack?
Yes. The Razzi lists PLA, PETG, ABS, TPU, Nylon, ASA and PC, and the Drevosly lists PLA, ABS, PETG, TPU and Nylon.
Do any of these racks have a warranty?
Only 1 of the 5 racks states a warranty term: the Razzi Fidel, with a 2-year limited warranty.
Related: best filament storage rack, best hygrometer for filament storage, best filament dryer bags with pump and how to dry filament. Also see our best petg filament storage. Also see our best 3d printer spool holder under 30.




