Best 3D Printer Spool Holder Under $30 (2026): 5 Picks for Smooth Feeding
Five spool holders under $30 compared by spool size, bearings, build and warranty, from a 6-set roller pack to a multi-kilogram sheet-metal frame.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLutyr Multi-Kg Holder9.7/10View on Amazon - 2
Best Value SetWeewooday 6-Set Holder9.7/10View on Amazon - 3
Best for Big SpoolsCregrant3D Multi-Kg9.6/10View on Amazon - 4
Best MountCreativity Mount Holder9.5/10View on Amazon
A spool that drags or wobbles feeds filament unevenly, and the print shows it. A holder with smooth bearings lets the spool turn freely while the extruder pulls, and the best 3d printer spool holder under 30 is the one that fits the spool, stays put on the bench and keeps feeding without drag.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Lutyr Multi-Kg Holder: Holds 500 g to 5 kg spools on a cast sheet-metal frame with a bearing feed seat and a 1 year warranty. Check price on Amazon
- Best Value Set Weewooday 6-Set Holder: 6 sets with smooth ring-covered bearings and silicone anti-slip mats, fitting spools of any size. Check price on Amazon
- Best for Big Spools Cregrant3D Multi-Kg: Same 500 g to 5 kg range as the Lutyr on a cast sheet-metal frame, with a card position design. Check price on Amazon
- Best Mount Creativity Mount Holder: A stainless steel and aluminum mount bracket for Ender 3, CR 10 and Sidewinder X1 printers. Check price on Amazon
Machines on the list

Multi-Kilogram Spool Holder Filament Bracket Spool
A multi-kilogram spool holder on an integrally cast sheet-metal frame, holding 500 g to 5 kg spools with a bearing feed seat and a 1 year warranty.
Pros
- Holds 500 g, 1 kg, 3 kg and 5 kg filament
- Integrally cast sheet-metal frame for long-term stability
- Bearing feed seat keeps feeding smooth
- 1 year warranty stated in the listing
Cons
- No weight is stated
- No bearing size or type is stated
- Reads like the same holder as the Cregrant3D listing
- Black only in this listing

Weewooday 6 Set 3D Printer Filament Spool Holder
A 6-set roller holder with smooth ring-covered bearings and silicone anti-slip mats, fitting spools of any size in PLA, ABS, TPU and other materials.
Pros
- 6 sets, 12 separated holders, in one box
- Bearings covered with a ring to prevent sticking from oxidation
- Silicone anti-slip mats for better adhesion
- Pre-assembled, no tools needed
Cons
- Bearings may feel stiff when first used
- No warranty term is stated
- 1.33 lb listed weight, the heaviest here

Creality Multi-Kilogram Spool Holder Filament
A multi-kilogram spool holder on an integrally cast sheet-metal frame, holding 500 g to 5 kg spools with a card position design and an anti-slip silicone base.
Pros
- Holds 500 g, 1 kg, 3 kg and 5 kg filament
- Integrally cast sheet-metal frame for long-term stability
- Card position design keeps the spool from sliding off
- Anti-slip silicone base bent to adapt to uneven ground
Cons
- No warranty term is stated
- No weight is stated
- Reads like the same holder as the Lutyr listing

Creativity 3D Printer Filament Holder
A mount rack bracket in stainless steel, aluminum alloy and ABS plastic, suiting 0.5 kg and 1 kg filament for Ender 3, CR 10 and Sidewinder X1 printers.
Pros
- Stainless steel, aluminum alloy and ABS plastic build
- Names Ender 3 Series, CR 10 Series, Ender 3 V3 SE and KE, and Sidewinder X1
- Suits 0.5 kg and 1 kg PLA and ABS in 1.75 mm and 3.0 mm
- One barrel and one bracket, securely installed
Cons
- No bearing detail is stated
- No warranty term is stated
- Only 0.5 kg and 1 kg spools, not multi-kilogram sizes
- Mount only; it does not sit on the bench like the others

2 Pair Filament Spool Holder 3D Printer Bracket
A 2-pair roller holder in metal and plastic with silicone anti-slip mats, fitting spools of any size and working well with 1 kg 1.75 mm PLA spools.
Pros
- 2 pairs, 4 holders, in one listing
- Silicone anti-slip mats at the bottom for better adhesion
- Fits spools of any size and all filament types
- Works well with 1 kg 1.75 mm PLA filament spools
Cons
- Bearings may feel stiff when first used
- No weight is stated
- No warranty term is stated
- Thinnest listing here, with no sizes or materials beyond metal and plastic
Other machines to compare
Weewooday 1 Set 3D Printer Filament Spool Holder FilamentCheck price on Amazon
2 Pcs Detachable Filament Reel Holder Compatible with BambuCheck price on Amazon
4 Pcs Detachable Filament Reel Holder Compatible with BambuCheck price on Amazon
Specs compared
| Model | HQ Score | Spool size | Bearings | Build | Warranty |
|---|---|---|---|---|---|
| Lutyr Multi-Kg Holder | 9.7/10 | 500 g to 5 kg | Bearing feed seat | Sheet metal, cast frame | 1 year |
| Weewooday 6-Set Holder | 9.7/10 | All sizes | Smooth, ring-covered | Metal and plastic | Not stated |
| Cregrant3D Multi-Kg | 9.6/10 | 500 g to 5 kg | Not stated | Sheet metal, cast frame | Not stated |
| Creativity Mount Holder | 9.5/10 | 0.5 kg and 1 kg | Not stated | Stainless steel, aluminum, ABS | Not stated |
| Shutao 2-Pair Holder | 9.5/10 | All sizes; 1 kg 1.75 mm PLA | Roller bearings | Metal and plastic | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. One listing states a warranty term, and three give no weight.
What the spool holder listings tell you
Two listings, Lutyr and Cregrant3D, describe the same holder: an 8.66 by 8.26 by 11.02 in sheet-metal frame for 500 g to 5 kg spools, with an anti-slip silicone base bent to fit uneven ground. Only the Lutyr states a warranty term, 1 year. The other three listings split between roller holders that sit on the bench and a mount bracket that bolts to the printer: Weewooday sells 6 sets of roller holders, Shutao sells 2 pairs, and Creativity sells a single mount bracket for named printer series.
Buying guide: best 3d printer spool holder under 30
Spool size
Match the holder to the spool. Lutyr and Cregrant3D both state compatibility with 500 g, 1 kg, 3 kg and 5 kg filament, while Creativity suits 0.5 kg and 1 kg PLA and ABS in 1.75 mm and 3.0 mm. Weewooday and Shutao both claim to fit spools of any size, and Shutao adds that it works well with 1 kg 1.75 mm PLA spools.
Bearings and drag
Bearings decide how freely the spool turns. Weewooday describes smooth bearings covered with a ring to keep them from sticking through oxidation, plus silicone anti-slip mats, and notes the bearings may feel stiff at first and need a little lubrication. Shutao gives the same advice: relubricate a bit and the bearings run great. Lutyr turns its feeding seat on a bearing to keep feeding smooth, while Creativity and Cregrant3D state no bearing detail.
Build and stability
Lutyr and Cregrant3D share a sheet-metal frame the listings describe as integrally cast, with an anti-slip silicone base bent to adapt to uneven ground. Weewooday and Shutao use metal and plastic with silicone anti-slip mats at the bottom. Creativity mixes stainless steel, aluminum alloy and ABS plastic in a mount bracket that installs on the printer.
Mount or bench holder
Creativity is the only mount in this guide: a barrel and bracket that suits Ender 3 Series, CR 10 Series, Ender 3 V3 SE and KE, and Sidewinder X1 printers. The other four are bench holders that sit beside the printer; Lutyr and Cregrant3D state they suit all printers, while Weewooday and Shutao state they fit spools of any size. A bench holder moves between printers; a mount stays with one machine.
Keep the holder and spool clear of the print bed and any moving printer parts, and set the holder where a bump cannot knock the spool onto the floor.
Project Match
Pair each project with the pick that fits the spool and the setup.
- Multi-kilogram spools: Lutyr, which states 500 g to 5 kg compatibility and a 1 year warranty, or Cregrant3D, which states the same range.
- Several printers on one bench: Weewooday, with 6 sets of roller holders for spools of any size.
- An Ender 3 or CR 10 that needs a mounted spool: Creativity, which names Ender 3 Series, CR 10 Series, Ender 3 V3 SE and KE, and Sidewinder X1.
- A second holder for 1 kg PLA spools: Shutao, which states it works well with 1 kg 1.75 mm PLA spools.
- A spare holder with no stated warranty: Cregrant3D, which matches the Lutyr frame and range without the warranty term.
How the scores add up
Each holder is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No listing states a safety feature, so all score zero on safety, and only one states a warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Lutyr Multi-Kg Holder | 9.7 | 30 | 22 | 21 | n/a | 2 |
| Weewooday 6-Set Holder | 9.7 | 30 | 21 | 22 | n/a | 0 |
| Cregrant3D Multi-Kg | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Creativity Mount Holder | 9.5 | 27 | 21 | 19 | n/a | 0 |
| Shutao 2-Pair Holder | 9.5 | 26 | 19 | 19 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
What size spool holder do I need?
Match the holder to the spool. Lutyr and Cregrant3D state 500 g to 5 kg, Creativity suits 0.5 kg and 1 kg, and Weewooday and Shutao claim spools of any size.
Do spool holders fit any 3D printer?
Lutyr and Cregrant3D state they suit all printers, and Creativity names Ender 3 Series, CR 10 Series, Ender 3 V3 SE and KE, and Sidewinder X1. Weewooday and Shutao describe holders for spools of any size and all filament types.
Why does my spool holder feel stiff?
New bearings can feel stiff at first. Weewooday and Shutao both say to lubricate a little and the bearings run well.
What is a multi-kilogram spool holder?
A holder built for heavier spools. Lutyr and Cregrant3D both state compatibility with 500 g, 1 kg, 3 kg and 5 kg filament on a sheet-metal frame.
Which spool holders have a warranty?
Only Lutyr states one here: a 1 year warranty. The other four listings state no warranty term.
Related: best 3D printer spool holder, best 3D PLA filament, how to dry filament, 3D printer filament types and the 3D printers hub. Also see our best large filament dryer. Also see our best filament dry box.




