Best Filament Runout Sensor (2026): 5 Picks Compared
Five filament runout sensors compared by detection, firmware, mounting and warranty, from official Creality replacements to the photoelectric BIGTREETECH SFS V2.0.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCreality V3 SE Sensor9.6/10View on Amazon - 2
Best DetectionBTT SFS V2.0 Ender 39.6/10View on Amazon - 3
Best Bi-DirectionalBTT SFS V2.0 Bi-Direct9.6/10View on Amazon - 4
Best Plug-and-PlayCreality K1 SE Sensor9.6/10View on Amazon
A long print fails in the small hours when the spool runs dry: the nozzle keeps moving, the part stops growing, and hours of filament and time go with it. A runout sensor watches the filament and pauses the printer the moment it runs out or breaks, so the print waits for a fresh spool instead of failing. This guide compares the best filament runout sensor picks for makers who print long jobs and unattended jobs, from official Creality replacements to a photoelectric BIGTREETECH sensor.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Creality V3 SE Sensor: Official Creality sensor for the Ender 3 V3 SE and KE with a 1-year limited warranty. Check price on Amazon
- Best Detection BTT SFS V2.0 Ender 3: Photoelectric sensing that catches runout, clogging, tying and extruder trouble. Check price on Amazon
- Best Bi-Directional BTT SFS V2.0 Bi-Direct: Two signal outputs that tell clogging apart from runout, with feeding in either direction. Check price on Amazon
- Best Plug-and-Play Creality K1 SE Sensor: Official K1 sensor that mounts on original holes with no firmware update. Check price on Amazon
Machines on the list

Creality Official Ender 3 V3 SE Filament Runout
An official Creality sensor for the Ender 3 V3 SE and Ender 3 V3 KE, for 1.75mm filament, with a metal filament guider, a blue LED and a 1-year limited warranty.
Pros
- Official Creality sensor for the Ender 3 V3 SE and KE
- 1-year limited warranty with lifetime technical assistance
- Metal filament guider with a smooth surface
- Blue LED shows normal feed at a glance
Cons
- Fits only the Ender 3 V3 SE and Ender 3 V3 KE
- No mounting details are stated
- No bracket or cable is stated

BIGTREETECH SFS V2.0 Smart Filament
A photoelectric smart filament sensor with a 2.88mm detection length, for Klipper, Marlin and RRF, that catches runout, clogging, tying and extruder trouble.
Pros
- Detects runout, clogging, tying and extruder trouble
- Photoelectric sensing with a 2.88mm detection length
- Bi-directional feeding, no orientation worries
- Supports Klipper, Marlin and RRF with 3 mounting holes
Cons
- No warranty term is stated
- Needs a motherboard with a spare I/O port
- Ender 3 and Voron 2.4 need a bracket printed from the Github files
- No weight is stated

BIGTREETECH SFS V2.0 Smart Filament Runout Sensor
A bi-directional photoelectric sensor for 1.75mm filament, with two signal outputs and indicator lights that tell clogging apart from runout.
Pros
- Two signal outputs tell clogging apart from runout
- Bi-directional feeding with no direction limit
- Photoelectric sensing with a 2.88mm detection length
- Supports Marlin, Klipper and RRF on Bowden and direct-drive extruders
Cons
- No warranty term is stated
- Needs a motherboard with a spare endstop or runout port
- Same model as the other SFS V2.0 listing here
- No dimensions are stated

Creality Official K1 SE Filament Runout Sensor
An official Creality replacement sensor for the K1, K1 SE, K1C and K1 Max and more, with a metal filament guide, a blue LED and plug-and-play mounting.
Pros
- Official Creality sensor with wide printer compatibility
- Metal filament guide with a polished, low-friction surface
- Blue LED shows feed status at a glance
- Plug-and-play mounting with no firmware update
Cons
- No warranty term is stated
- No filament size is stated
- No weight or dimensions are stated
- No cable length is stated

Original Creality Ender 3 V2 Filament Runout
A micro-switch break detection module for 32-bit Ender 3 V2 boards, with a blue LED, an extended cable and a bracket for the Ender 3 series.
Pros
- Micro switch with no friction on the filament
- Blue LED shows normal feed at a glance
- Extended cable and bracket included in the package
- Fits Ender 3, Ender 3 V2, Ender 3 Pro, Ender 6 and CR-10 models
Cons
- Only for 32-bit motherboards, versions 4.2.2 and 4.2.7
- Ender 3 V2, Ender 3 and Ender 3 Pro need a firmware flash first
- No warranty term is stated
- Bracket fits only the Ender 3 series
Other machines to compare
Creality Official K1 SE Filament Runout SensorCheck price on Amazon
Creativity 3D Printer Filament Detection Sensor ModuleCheck price on Amazon
Specs compared
| Model | HQ Score | Detection | Filament | Firmware | Mounting |
|---|---|---|---|---|---|
| Creality V3 SE Sensor | 9.6/10 | Runout and break | 1.75mm | Not stated | Not stated |
| BTT SFS V2.0 Ender 3 | 9.6/10 | Runout, clog, tying, extruder | 1.75mm | Klipper, Marlin, RRF | 3 mounting holes |
| BTT SFS V2.0 Bi-Direct | 9.6/10 | Runout, clog, tying, extruder | 1.75mm | Marlin, Klipper, RRF | 3 mounting holes |
| Creality K1 SE Sensor | 9.6/10 | Runout and break | Not stated | No update needed | Original mounting holes |
| HOCENWAY Ender 3 V2 | 9.5/10 | Break detection | Not stated | Flash needed for Ender 3, V2, Pro | Bracket, Ender 3 series |
Specs are what each manufacturer publishes as its rating on the listing, collected November 2026. Only 1 of the 5 listings states a warranty term, and only the 2 BIGTREETECH listings state a detection length, 2.88mm.
What the listings tell you, and what they leave out
We read 5 filament sensor listings for this guide. Only 1 stated a warranty term, the Creality Ender 3 V3 SE sensor with its 1-year limited warranty. Only the 2 BIGTREETECH listings stated a detection length, 2.88mm, and only those 2 named clogging and extruder trouble as well as runout. The official Creality listings name the printers they fit; the BIGTREETECH listings name firmware and boards instead.
Best Filament Runout Sensor Buying Guide
Photoelectric or micro switch
The BIGTREETECH listings state photoelectric sensing with a 2.88mm detection length. The HOCENWAY listing states a micro switch, using a mechanical proximity switch with no friction. The Creality listings state a blue LED and a metal guide, and do not name the sensing method, so compare them on compatibility and warranty instead.
Match the sensor to the printer
The Creality K1 SE sensor names the widest printer list here: K1, K1C, K1 Max, K1 SE, Ender 3 V3, Ender 3 V3 Plus, Ender 5 S1, Ender 5 Max, Sermoon D3 and CR-200B. The Creality V3 SE sensor names only the Ender 3 V3 SE and Ender 3 V3 KE. The HOCENWAY sensor names the Ender 3, Ender 3 V2, Ender 3 Pro, Ender 6, CR-10S PRO, CR-10 V2 V3 and Ender 3 Max. The BIGTREETECH sensors name firmware and boards, not printers, so match them to the board in your machine.
Firmware and ports
The Creality K1 SE sensor needs no firmware or software update, and mounts on the original mounting holes. The HOCENWAY sensor needs a firmware flash on the Ender 3 V2, Ender 3 and Ender 3 Pro, while the Ender 6 and CR-10S PRO already have filament detection set. The BIGTREETECH sensors need a motherboard with a spare I/O port, and the listings say to consult technical support before using a board without a filament runout port.
LED signals
The Creality sensors use one blue LED: it lights during normal feed and turns off when filament runs out or breaks. The BIGTREETECH SFS V2.0 adds a red light for no filament and a flashing blue light for normal extrusion, with two signal outputs that tell clogging apart from runout. The HOCENWAY sensor uses the same blue LED pattern as the Creality sensors.
Project Match
- K1, K1C, K1 Max and K1 SE prints: the Creality K1 SE sensor, which mounts on the original holes.
- Ender 3 V3 SE and Ender 3 V3 KE prints: the Creality V3 SE sensor, with a 1-year limited warranty.
- Klipper, Marlin and RRF builds with a spare I/O port: either BIGTREETECH SFS V2.0, for runout plus clogging detection.
- Ender 3 V2, Ender 3 and Ender 3 Pro prints on 32-bit boards: the HOCENWAY sensor, after a firmware flash.
- Bowden and direct-drive extruders: the BIGTREETECH SFS V2.0 supports both.
How the scores add up
Each sensor is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Creality V3 SE Sensor | 9.6 | 28 | 20 | 20 | n/a | 3 |
| BTT SFS V2.0 Ender 3 | 9.6 | 32 | 22 | 21 | n/a | 0 |
| BTT SFS V2.0 Bi-Direct | 9.6 | 30 | 22 | 21 | n/a | 0 |
| Creality K1 SE Sensor | 9.6 | 30 | 21 | 20 | n/a | 0 |
| HOCENWAY Ender 3 V2 | 9.5 | 26 | 20 | 20 | n/a | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
How does a filament runout sensor work?
The Creality sensors use a blue LED that turns off when filament runs out, and the printer pauses. The BIGTREETECH SFS V2.0 uses photoelectric sensing with a 2.88mm detection length, and pauses printing on runout, clogging or extruder trouble. The HOCENWAY sensor uses a micro switch and the same blue LED signal.
What is a filament runout sensor?
A module that watches the filament feed and pauses the printer when filament runs out or breaks, so a print does not fail mid-job. The Creality K1 SE listing says it saves material, time and the nozzle from damage, which matters most on long or unattended print jobs.
Does a runout sensor need a firmware update?
The Creality K1 SE sensor needs no firmware or software update. The HOCENWAY sensor needs a firmware flash on the Ender 3 V2, Ender 3 and Ender 3 Pro, while the Ender 6 and CR-10S PRO already have filament detection set. The BIGTREETECH sensors need a board with a spare I/O port, and the listings say to consult technical support if the board has no runout port.
Which sensor detects more than runout?
The BIGTREETECH SFS V2.0 detects extrusion errors from runout, nozzle clogging, filament tying and extruder trouble, with two signal outputs and indicator lights that tell clogging apart from runout. The Creality and HOCENWAY sensors cover runout and breakage only.
Will a sensor fit my printer?
Match the compatibility list in the listing: the Creality sensors name printers, the HOCENWAY sensor names printers and 32-bit board versions 4.2.2 and 4.2.7, and the BIGTREETECH sensors name firmware and boards with a spare I/O port. If the listing does not name your printer or board, check with the seller before ordering.
Related: the 3D printers hub, the best 3D PLA filament guide, the best 3D printing nozzle guide, the 3D printer nozzle size guide, how to dry filament, 3D printer maintenance, the best 3D printer bed adhesive guide, 3D printer filament types and the best multi extruder 3D printer guide.




