Best Engraving Pen for Metal, Wood, Glass and Plastic (2026)
Cordless engraving pens for metal, wood, glass and plastic, compared by speed, bits, runtime and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSTREBITO Engraving Pen9.6/10View on Amazon - 2
Best for Detail WorkAM ARROWMAX SGS9.5/10View on Amazon - 3
Best RuntimeCalavive SketchPro9.4/10View on Amazon - 4
Best Kit for BeginnersCraft Culture EtchMate9.4/10View on Amazon - 5
Best LightweightVanlgs Engraving Pen9.4/10View on Amazon
A personalized tumbler for a friend, a name etched on a tool, a glass ornament marked for a holiday: a small engraving pen turns plain objects into keepsakes. The best engraving pen for metal, wood, glass and plastic is a cordless rotary pen with enough speeds for delicate lines and deeper marks, a bit set that covers each material, and a battery that lasts through a project. This guide compares 5 such pens, from what each listing states, so the choice comes down to speed, bits, runtime and warranty rather than guesswork.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall STREBITO Engraving Pen: 5 speeds from 12,000-36,000 RPM, a 47-piece kit with diamond bits, and a lifetime warranty. Check price on Amazon
- Best for Detail Work AM ARROWMAX SGS: Hollow-core motor, 4 RPM modes with forward and reverse, an OLED display and 42 accessories in an aluminum case. Check price on Amazon
- Best Runtime Calavive SketchPro: USB-C rechargeable with a 120-minute runtime and 26 accessories, including stencils and an eBook guide. Check price on Amazon
- Best Kit for Beginners Craft Culture EtchMate: 2 rechargeable batteries with a charging dock, 31 bits, stencils and a 36-page guidebook. Check price on Amazon
- Best Lightweight Vanlgs Engraving Pen: A 49g pen-shaped body with an LED ring light, 5 speeds and 31 bits. Check price on Amazon
Machines on the list

STREBITO Engraving Pen for Metal Wood Glass
A 47-piece cordless engraving kit with 5 speeds from 12,000-36,000 RPM, diamond grinding bits and a lifetime warranty.
Pros
- 5 speeds from 12,000-36,000 RPM, the highest top speed here
- 47-piece kit with 30 diamond grinding bits, 3 drill bits and carbide burrs
- 350mAh battery charges fully in about 40 minutes
- Lifetime warranty stated in the listing
Cons
- Runtime is not stated, only the 350mAh battery size
- No LED work light is stated
- No speed or battery display is stated
- No spare battery is stated, so a flat battery ends the session

AM ARROWMAX Electric Mini Engraving Pen
A mini cordless engraving pen with a hollow-core motor, 4 RPM modes with forward and reverse, an OLED display and 42 accessories in an aluminum case.
Pros
- Hollow-core motor the maker claims gives three times the torque of a standard motor
- 4 RPM modes with forward and reverse, switched with a single hand
- 42 accessories: 30 engraving bits and 12 polishing bits
- Up to 90 minutes of runtime on a 5V rechargeable battery
Cons
- Speeds are given as modes only, with no RPM figures stated
- The listing says the pen is not intended for heavy-duty work
- No LED work light is stated
- Charging is magnetic only, with no USB-C port stated

SketchPro Cordless Engraver Pen has LED Light
A cordless engraver pen with an LED light, a 3-speed motor, USB-C charging and a 120-minute runtime.
Pros
- 120-minute runtime over USB-C, the longest stated runtime here
- LED light for visibility in dim environments
- 26 accessories, including engraving bits, drills, polishers and stencils
- A 1 year manufacturer's warranty is stated
Cons
- Only 3 speeds, with no RPM figures stated
- The listing does not say how many of the 26 accessories are engraving bits
- No display for speed or battery is stated
- No spare battery or charging dock is stated

Engraving Pen for Metal, Wood, Glass
A cordless engraving pen with an LED work light, speeds up to 20,000 RPM, 2 rechargeable batteries and a charging dock.
Pros
- 2 rechargeable batteries with a charging dock, so a battery charges while the other works
- 31 bits, with 30 bits in a storage case plus 1 carbide burr bit
- Stencils, 4 practice pieces and a 36-page guidebook for beginners
- Digital display tracks speed and battery
Cons
- No concrete warranty term is stated
- Runtime is not stated, even with 2 batteries
- No RPM figures below the 20,000 RPM top speed are stated
- No weight is stated

Vanlgs Engraving Pen for Metal Wood Glass Plastic
A 49g cordless engraving pen with an LED ring light, 5 speeds from 7,500 to 20,000 RPM and 31 bits.
Pros
- 49g pen-shaped body
- LED ring light around the work surface
- 5 speeds from 7,500 to 20,000 RPM
- 31 bits for metal, glass, wood and more
Cons
- No warranty term is stated
- Runtime is not stated
- No display for speed or battery is stated
- No stencils or guidebook are stated
Other machines to compare
Kaibced Cordless Engraving Pen with 48 Kits & LED ScreenCheck price on Amazon
LUMINIC Engraving Pen 5-Speed & 40 Bits LED LightCheck price on Amazon
ARROWMAX Wood Carving Engraving Pen for Metal GlassCheck price on Amazon
HARDELL 24W Engraving PenCheck price on Amazon
Electric Engraving Pen with 37 BitsCheck price on Amazon
Specs compared
| Model | HQ Score | Speed | Bits and accessories | Runtime | Warranty |
|---|---|---|---|---|---|
| STREBITO Engraving Pen | 9.6/10 | 12,000-36,000 RPM | 47 pieces | Not stated | Lifetime |
| AM ARROWMAX SGS | 9.5/10 | 4 RPM modes | 42 accessories | Up to 90 minutes | 1 year |
| Calavive SketchPro | 9.4/10 | 3 speeds | 26 accessories | 120 minutes | 1 year |
| Craft Culture EtchMate | 9.4/10 | Up to 20,000 RPM | 31 bits | Not stated | Not stated |
| Vanlgs Engraving Pen | 9.4/10 | 7,500-20,000 RPM | 31 bits | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 6 November 2026.
Most engraving pen listings sell the kit, not the motor
Every pen here arrives as a kit: 31, 42, 31, 26 and 47 pieces across the 5 pens. Speed figures are thinner: only 3 of the 5 state RPM figures at all, from 7,500 to 36,000 RPM across the group. Runtime is thinner still: 2 pens state it, at 90 and 120 minutes, while the other 3 leave it unstated. Read the kit list and the speed figures before the marketing lines, and the differences between these pens show up fast.
Buying guide: best engraving pen for metal, wood, glass and plastic
Match the pen to your material
All 5 pens list metal, wood, glass and plastic among their materials, with leather, acrylic and stone named on some listings. Diamond bits suit glass and metal nameplates, while carbide burrs suit wood carving. Check the bit list for the material you engrave most, not just the headline count.
Speed and control
Speeds here run from 3 speeds with no RPM figures to 5 speeds from 12,000-36,000 RPM. More speeds help when some projects need fine lines and others need deeper marks. Forward and reverse, offered on the AM ARROWMAX SGS, helps clear a cut without turning the piece. A display that shows the speed setting, offered on the Craft Culture EtchMate and the AM ARROWMAX SGS, keeps the setting visible while you work.
Bits and accessories
Bit counts run from 26 accessories to 47 pieces, and the mix matters more than the count: engraving bits for lines, polishing bits for smoothing, drill bits for holes, stencils for lettering. Stencils come with the Craft Culture EtchMate, the Calavive SketchPro and the STREBITO pen. The Craft Culture EtchMate also adds 4 practice pieces and a 36-page guidebook. Count the bits you will actually use before you count the total.
Runtime and charging
Only 2 of the 5 pens state a runtime: 90 minutes for the AM ARROWMAX SGS and 120 minutes for the Calavive SketchPro. The STREBITO pen states a 350mAh battery that charges in about 40 minutes, and the Craft Culture EtchMate answers the same problem with 2 batteries and a charging dock. If a project runs long, a spare battery or a stated runtime matters more than a fast charge.
Where you will use it
The Vanlgs, Calavive and STREBITO pens charge over USB-C, the AM ARROWMAX SGS charges magnetically, and the Craft Culture EtchMate charges its 2 batteries in a dock. An LED light, offered on the Vanlgs pen, the Craft Culture EtchMate and the Calavive SketchPro, helps in dim work areas. At 49g, the Vanlgs pen suits long sessions, and its pen-shaped body handles like a regular pen.
Rotary bits spin fast and throw small chips. Wear eye protection, keep fingers behind the bit, and hold the piece steady before you start. Switch off the pen before changing a bit.
Project Match
Pair the project with the pen whose listing names the material and the kit for it.
- Jewelry and tumblers: Vanlgs Engraving Pen, with a 49g body, an LED ring light and 31 bits for metal and glass.
- Beads and resin pieces: AM ARROWMAX SGS, with 42 accessories, forward and reverse, and an OLED display.
- Glass gifts and ornaments: Calavive SketchPro, with an LED light, 26 accessories and a 120-minute runtime.
- Beginner projects with stencils: Craft Culture EtchMate, with stencils, 4 practice pieces and a 36-page guidebook.
- Mixed materials, from wood to stone: STREBITO Engraving Pen, with diamond bits, 5 speeds and a 47-piece kit.
How the scores add up
Each pen is scored on performance, build, value, safety and warranty. How we pick explains the weights. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| STREBITO Engraving Pen | 9.6 | 32 | 21 | 21 | 0 | 4 |
| AM ARROWMAX SGS | 9.5 | 30 | 22 | 20 | 0 | 2 |
| Calavive SketchPro | 9.4 | 26 | 20 | 20 | 0 | 2 |
| Craft Culture EtchMate | 9.4 | 29 | 21 | 21 | 0 | 0 |
| Vanlgs Engraving Pen | 9.4 | 28 | 20 | 20 | 0 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What is the best engraving pen for metal, wood, glass and plastic?
The STREBITO pen ranks first here, with 5 speeds from 12,000-36,000 RPM, a 47-piece kit with diamond bits and a lifetime warranty. The AM ARROWMAX SGS follows for detail work, with 4 RPM modes, forward and reverse, and 42 accessories. The right pick depends on the material you engrave most and whether you need a long runtime or a spare battery.
How do you engrave glass with an engraving pen?
Use a fine bit at a low speed, keep the pen moving in light passes, and work under a bright light so the lines stay visible. The Vanlgs pen has an LED ring light for this, and the STREBITO kit includes 30 diamond grinding bits. Practice on a spare piece first, and wear eye protection.
Do engraving pens work on wood?
Yes. All 5 pens list wood among their materials, and the listings name wood carving among their uses. Carbide burrs and diamond bits cut the lines, and a lower speed keeps the marks controlled.
Do engraving pens work on metal?
Yes. All 5 pens list metal among their materials, and the STREBITO kit names metal nameplates while the AM ARROWMAX SGS is listed for beads and metal work. Diamond bits and carbide burrs do the marking, and a steady hand matters more than speed on hard surfaces.
Do engraving pens come with stencils?
3 of the pens here include stencils: the Craft Culture EtchMate, the Calavive SketchPro and the STREBITO pen. The Craft Culture EtchMate also includes 4 practice pieces and a 36-page guidebook, which suit a first project.
Related: best engraving pen for carving, best diamond tip drill bit set, best laser engraver for metal and the CNC tooling hub.




