Best Engraving Pen for Carving (2026): 5 Picks Compared
Five cordless engraving pens for carving wood, metal, glass, ceramic and stone, compared by speed settings, bit counts, battery and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGyunkyluve Engraving Pen9.6/10View on Amazon - 2
Best for BeginnersKaibced Engraving Pen9.5/10View on Amazon - 3
Best Safety FeaturesUolor Engraving Pen9.5/10View on Amazon - 4
Best for Fine DetailCBVCBV Engraving Pen9.4/10View on Amazon
Carving a name into a wooden keepsake, etching a pattern on a glass bottle, or marking a metal tag all come down to the same small tool: a pen that fits the hand and spins a tiny bit fast enough to cut a clean line. The best engraving pen for carving is the one that matches the material in front of you, with enough speeds to go slow on wood and fast on stone, and a kit of bits that covers fine lines and deeper cuts.
This guide compares 5 cordless engraving pens, scored on performance, build, value, safety and warranty. Every listing states the materials its pen handles, so the choice comes down to speeds, bits, battery and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Gyunkyluve Engraving Pen: 60 accessories, 5 speeds from 7,500 to 20,000 RPM, an LED ring light, an LCD screen and a 2 year warranty. Check price on Amazon
- Best for Beginners Kaibced Engraving Pen: A 48-piece kit with 5 speeds from 7,500 to 20,000 RPM, an LED ring light and a 49g pen-shaped body. Check price on Amazon
- Best Safety Features Uolor Engraving Pen: Smart power-off protection and an overload protection chip, with 3 speeds from 5,000 to 18,000 r/min. Check price on Amazon
- Best for Fine Detail CBVCBV Engraving Pen: 9 speed settings with forward and reverse rotation, plus 30 diamond grinding heads and a diamond K-needle. Check price on Amazon
Machines on the list

Upgraded Electric Engraving Pen
A cordless engraving pen with 60 accessories, 5 speeds from 7,500 to 20,000 RPM, an LED ring light and an LCD screen.
Pros
- 5 speeds from 7,500 to 20,000 RPM, low for wood and plastic, high for metal, glass and stone
- LED ring light removes shadows on dark or curved surfaces, and the LCD screen shows speed and battery level
- 60 accessories in an organizer box with a lid, each with its own slot
- 1000mAh battery with USB-C charging, overcharge and overheat protection
Cons
- No safety protection feature is stated in the listing
- No engraving depth or work area is stated
- One-button control means speed and power share a single button
- The listing does not state a runtime figure

Kaibced Cordless Engraving Pen with 48 Kits & LED
A 48-piece cordless engraving kit with 5 speeds from 7,500 to 20,000 RPM, an LED ring light and a 49g pen-shaped body.
Pros
- 5 speeds from 7,500 to 20,000 RPM for delicate shading and deeper engraving
- LED ring light gives shadow-free light on metal, glass and wood
- 48-piece kit: 30 engraving bits, 3 saw bits, a carbide burr bit, 4 practice materials and 6 stencils
- 49g pen-shaped body with USB-C charging
Cons
- No safety protection feature is stated in the listing
- No engraving depth is stated
- No battery capacity or runtime figure is stated

Uolor USB Rechargable Engraving Pen with 42 Bits
A USB rechargeable engraving pen with 42 bits, 3 speeds from 5,000 to 18,000 r/min and smart power-off protection.
Pros
- Smart power-off protection with an overload protection chip that cuts power when resistance is too large
- 3 speeds from 5,000 to 18,000 r/min for different materials
- 42 bits in a portable cordless kit, with templated stencils for gifts
- USB rechargeable and usable with any device that has a USB interface
Cons
- 3 months manufacturer warranty is the briefest stated term in this guide
- Up to 30 minutes idling after a full charge is a short runtime figure
- No weight is stated in the listing
- No LED light or display is stated

vueowcue Cordless Engraving Pen with LCD Display
A cordless engraving pen with an LCD display, 5 speeds, an anti-slip grip and a kit of 30 precision bits in a storage case.
Pros
- LCD display shows remaining battery life and current speed at a glance
- 5 speeds for wood, metal, glass, ceramic, stone, plastic and 60+ surfaces
- Non-slip rubberized grip on a lightweight mini pen body
- Kit includes 30 precision bits, 3 saw bits, a carbide burr, practice materials and reusable stencils
Cons
- No warranty term is stated; the spec table reads 0
- No RPM range is stated for the 5 speeds
- No battery capacity or runtime figure is stated
- No weight is stated in the listing

Wireless Electric Engraving Pen for Glass & Metal
A wireless engraving pen with 9 speed settings, forward and reverse rotation, 30 diamond grinding heads and a diamond K-needle.
Pros
- 9 speed settings with forward and reverse rotation
- 30 diamond grinding heads in various sizes plus 1 diamond K-needle
- Slim, pen-like design for comfortable handling during extended use
- High-precision motor for stable rotation and reduced heat buildup
Cons
- No warranty term is stated; the listing refers to the instructions or customer service
- No RPM range is stated for the 9 speeds
- No battery capacity, charging details or runtime figure is stated
- No weight is stated in the listing
Other machines to compare
Hot Wire PenCheck price on Amazon
Electric Engraving Pen with 37 BitsCheck price on Amazon
HOTROSE Electric Engraving Pen with 37 BitsCheck price on Amazon
ARROWMAX Wood Carving Engraving Pen for Metal GlassCheck price on Amazon
Specs compared
| Model | HQ Score | Speed settings | Bits included | Battery | Weight | Safety | Warranty |
|---|---|---|---|---|---|---|---|
| Gyunkyluve Engraving Pen | 9.6/10 | 5 speeds, 7,500-20,000 RPM | 60 accessories | 1000mAh, USB-C | 50g | Not stated | 2 years |
| Kaibced Engraving Pen | 9.5/10 | 5 speeds, 7,500-20,000 RPM | 48-piece kit | USB-C rechargeable | 49g | Not stated | 2 years |
| Uolor Engraving Pen | 9.5/10 | 3 speeds, 5,000-18,000 r/min | 42 bits | USB rechargeable, up to 30 minutes idling | Not stated | Power-off protection | 3 months |
| vueowcue Engraving Pen | 9.4/10 | 5 speeds | 31 bits | USB-C rechargeable | Not stated | Not stated | Not stated |
| CBVCBV Engraving Pen | 9.4/10 | 9 speeds, forward/reverse | 30 diamond heads, 1 K-needle | Not stated | Not stated | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 1 November 2026. A spec the listing does not publish is shown as Not stated.
What the listings tell you, and what they leave out
The 5 listings in this guide state speed settings, bit counts and charging, but they leave gaps. Only 1 states a safety cut-off, and only 3 state a warranty term. Only 2 state a weight, and only 3 state an RPM range. Only 1 states a battery capacity, and only 1 states a runtime figure.
A missing spec is unknown rather than a flaw in the pen itself: the listing may simply not publish it. The gaps matter most for safety and warranty, the two things a buyer cannot check from a photo. Where a listing contradicts itself, the review for that pen says so.
Buying guide: choosing the best engraving pen for carving
Speed settings
Speed settings decide which materials a pen can handle. The Gyunkyluve and Kaibced pens offer 5 speeds from 7,500 to 20,000 RPM, with low speeds for wood and plastic and high speeds for metal, glass and stone. The Uolor pen offers 3 speeds from 5,000 to 18,000 r/min. The CBVCBV pen offers 9 speed settings with forward and reverse rotation but states no RPM range, and the vueowcue pen offers 5 speeds with no RPM range stated.
Bits and accessories
Bit counts run from 30 diamond grinding heads on the CBVCBV pen to 60 accessories on the Gyunkyluve pen, with the Kaibced kit at 48 pieces and the Uolor kit at 42 bits. Diamond heads suit glass and metal, while the stencils and practice materials in the vueowcue and Kaibced kits suit a beginner learning lettering and patterns.
Battery and charging
All 5 pens are cordless and rechargeable over USB or USB-C. Only the Gyunkyluve listing states a battery capacity, 1000mAh, and only the Uolor listing states a runtime figure, up to 30 minutes of idling after a full charge. The vueowcue LCD display shows remaining battery life and current speed, and the Gyunkyluve LCD screen shows speed and battery level.
Grip and weight
Only 2 listings state a weight: the Gyunkyluve pen at 50g and the Kaibced pen at 49g, both described as lightweight with an anti-slip grip. The vueowcue pen also lists a non-slip rubberized grip, and the CBVCBV pen describes a slim, pen-like design.
Warranty and safety
The Gyunkyluve and Kaibced listings state a 2 year warranty, the Uolor listing states 3 months, and the vueowcue and CBVCBV listings state no term. On safety, only the Uolor listing states a protection feature: a circuit board and overload chip that cut power when resistance grows too large.
Project Match
Match the project to the pen by the materials each listing states:
- Wood carving and signs: the Gyunkyluve, vueowcue, Kaibced and Uolor pens, each of which lists wood. The CBVCBV pen lists glass, metal and ceramic bottles only.
- Jewelry and small gifts: the Uolor pen, described for jewelry making, and the Kaibced pen, which ships with practice materials and stencils.
- Glass etching: the CBVCBV pen with 30 diamond grinding heads, or the Uolor pen, which lists glass and diamond.
- Stone and ceramic: the Gyunkyluve, vueowcue, Kaibced and Uolor pens, each of which lists stone or ceramic.
- Metal marking: any of the 5 picks, since each listing states metal.
How the scores add up
Each pen is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing, which is why pens with no stated safety feature or warranty term sit lower even when their speeds and bit counts look strong.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Gyunkyluve Engraving Pen | 9.6 | 30 | 21 | 21 | 0 | 3 |
| Kaibced Engraving Pen | 9.5 | 30 | 21 | 20 | 0 | 3 |
| Uolor Engraving Pen | 9.5 | 27 | 19 | 19 | 6 | 2 |
| vueowcue Engraving Pen | 9.4 | 26 | 20 | 20 | 0 | 0 |
| CBVCBV Engraving Pen | 9.4 | 28 | 19 | 18 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
Can an engraving pen carve wood?
Yes. The Gyunkyluve, vueowcue, Kaibced and Uolor listings all state wood among the materials their pens handle, and the Gyunkyluve listing recommends low speeds for wood and plastic. Start with a light pass and a fine bit.
What speed should I use for metal and stone?
High speeds, according to the Gyunkyluve listing, which recommends low speeds for wood and plastic and high speeds for metal, glass and stone. The Gyunkyluve and Kaibced pens reach 20,000 RPM, and the Uolor pen reaches 18,000 r/min.
How long does the battery last on a cordless engraving pen?
Only 1 listing in this guide states a runtime figure: the Uolor pen runs up to 30 minutes idling after a full charge. The Gyunkyluve listing states a 1000mAh battery with USB-C charging.
Do I need a computer to use an engraving pen?
No. The listings describe cordless pens that charge over USB or USB-C, and none of them states that a computer is needed. Speed is set on the pen itself, with a button on the Gyunkyluve pen and 5 speeds on the Kaibced and vueowcue pens.
What bits come with an engraving pen kit?
It varies by kit. The Gyunkyluve pen ships with 60 accessories, the Kaibced kit holds 48 pieces including 30 engraving bits, 3 saw bits and 1 carbide burr bit, the Uolor kit holds 42 bits, the vueowcue kit holds 30 precision bits plus 3 saw bits and 1 carbide burr, and the CBVCBV pen ships with 30 diamond grinding heads and 1 diamond K-needle.
Related: the engraving pen carving hub, and the best CNC bit set for engraving, engraving pen vs laser engraver, best wood for CNC carving and best leather for laser engraving.




