Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Asa Filament for Outdoor Use (2026)

5 ASA filaments for outdoor prints, compared by UV resistance, heat limit, print speed, accuracy and warranty.

Best Asa Filament for Outdoor Use (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Creality ASA 350mm/sBest High SpeedCreality ASA 350mm/s9.7/10View on Amazon
  2. 2YXPOLYER Olive DrabBest Sunlight HoursYXPOLYER Olive Drab9.7/10View on Amazon
  3. 3IEMAI ASA BlackBest AccuracyIEMAI ASA Black9.7/10View on Amazon
  4. 4Polymaker ASA BlackBest Settings DetailPolymaker ASA Black9.7/10View on Amazon

A bracket on a fence, a sign by the garden gate, a clip on a car roof rack: outdoor prints live in sun and rain, and a part that warps, fades or cracks after one summer is a print wasted. The listings here describe ASA as UV and weather resistant, with the heat resistance for parts that sit in the sun. The best asa filament for outdoor use is the spool whose UV resistance, heat limit and print settings match the part and the printer, and this guide compares 5 of them by those numbers, using only what each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best High Speed Creality ASA 350mm/s: Up to 350 mm/s, +/- 0.03 mm accuracy, 100 °C heat limit and a 1-year warranty. Check price on Amazon
  • Best Sunlight Hours YXPOLYER Olive Drab: Over 2,000 hours of direct sunlight without discoloration, AMS-compatible spool. Check price on Amazon
  • Best Accuracy IEMAI ASA Black: +/- 0.02 mm accuracy, full print settings, vacuum sealed with desiccant. Check price on Amazon
  • Best Settings Detail Polymaker ASA Black: Nozzle 250 °C, bed 90 °C, 50 mm/s, lifetime technical support. Check price on Amazon

Machines on the list

Creality ASA Filament 1.75mm, 1kg Spool (2.2lbs)

Creality ASA Filament 1.75mm, 1kg Spool (2.2lbs)

Creality9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.75 mm Creality ASA spool in black, rated to 100 °C, with a print speed of up to 350 mm/s, dimensional accuracy of +/- 0.03 mm and a 1-year warranty.

Pros

  • Print speed of up to 350 mm/s, the highest speed stated here
  • Dimensional accuracy of +/- 0.03 mm
  • Withstands 100 °C and resists UV radiation, aging and corrosion
  • 1-year warranty stated in the spec table

Cons

  • No nozzle or bed temperature is stated
  • No enclosed printing guidance is stated
  • No bed adhesive guidance is stated
YXPOLYER ASA Filament 1.75mm 1kg Olive Drab 3D

YXPOLYER ASA Filament 1.75mm 1kg Olive Drab 3D

yxpolyer9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.75 mm yxpolyer ASA spool in olive drab, UV, rain, heat and weather resistant, stated for over 2,000 hours of direct sunlight, with an AMS-compatible spool and a 1-year warranty.

Pros

  • Stated for over 2,000 hours of direct sunlight exposure without discoloration
  • Maintains shape up to 96 °C for long-term outdoor use
  • AMS-compatible spool with a heat-resistant PC spool of around 165 g
  • 1-year warranty stated in the spec table

Cons

  • No print speed is stated
  • No dimensional accuracy figure is stated
  • No nozzle or bed temperature is stated
  • One-click printing is stated only for Bambu Lab default settings
IEMAI ASA 3D Printer Filament 1.75mm

IEMAI ASA 3D Printer Filament 1.75mm

IEMAI9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.75 mm IEMAI ASA spool in black, UV and weather resistant, with dimensional accuracy of +/- 0.02 mm, full print settings and vacuum-sealed packaging with desiccant.

Pros

  • Dimensional accuracy of +/- 0.02 mm, the smallest tolerance stated here
  • Full settings stated: nozzle 240 to 270 °C, bed 70 to 95 °C, speed 30 to 50 mm/s
  • Vacuum sealed with desiccant to protect against moisture and dust
  • Compatible with Bambu Lab X1 and P1S, Creality K1, QIDI and other high-temperature printers

Cons

  • No warranty term is stated
  • No heat limit temperature is stated
  • Enclosed chamber printing is recommended
  • No sunlight exposure hours are stated
Polymaker ASA Filament 1.75mm Jet Black 1KG

Polymaker ASA Filament 1.75mm Jet Black 1KG

Polymaker9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.75 mm ASA filament in jet black, UV and weather resistant, rated to 100 °C, with a stated nozzle temperature of 250 °C, a bed temperature of 90 °C and a speed of 50 mm/s.

Pros

  • UV and weather resistant, less prone to environmental stress cracking
  • Withstands temperatures up to 100 °C with high toughness and impact resistance
  • Full print settings stated: 250 °C nozzle, 90 °C bed, 50 mm/s
  • Lifetime technical support from the maker

Cons

  • No warranty term is stated
  • No dimensional accuracy figure is stated
  • Enclosed printer needed for large parts to prevent warping
  • No print speed above 50 mm/s is stated
Creality Official HP ASA Filament 1.75mm

Creality Official HP ASA Filament 1.75mm

Creality9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.75 mm Creality official HP ASA spool in black, UV resistant and rated to 100 °C, described as stronger than PLA and ABS, with no clog, bubble or tangle.

Pros

  • UV resistant and less prone to environmental stress cracking
  • Withstands temperatures up to 100 °C with high toughness and impact resistance
  • Stronger than PLA filament and ABS filament, per the listing
  • Suitable for most Creality printers, including K1, K1C, K1 Max, K1 SE, Ender 3 V3 SE, K2 and K2 Plus

Cons

  • No warranty term is stated
  • No print speed is stated
  • No dimensional accuracy figure is stated
  • No nozzle or bed temperature is stated

Other machines to compare

Specs compared

Model HQ Score Diameter Spool Heat limit Print speed Accuracy Warranty
Creality ASA 350mm/s 9.7/10 1.75 mm 1 kg 100 °C Up to 350 mm/s +/- 0.03 mm 1 year
YXPOLYER Olive Drab 9.7/10 1.75 mm 1 kg 96 °C Not stated Not stated 1 year
IEMAI ASA Black 9.7/10 1.75 mm 1 kg Not stated 30-50 mm/s +/- 0.02 mm Not stated
Polymaker ASA Black 9.7/10 1.75 mm 1 kg 100 °C 50 mm/s Not stated Not stated
Creality Official ASA 9.6/10 1.75 mm 1 kg 100 °C Not stated Not stated Not stated

We give each product’s specs as its manufacturer rates them; listings read 3 November 2026. Where a listing contradicts itself, both figures are shown.

What the listings tell you

5 listings were compared. All 5 are 1.75 mm ASA in 1 kg spools, and all 5 claim UV and weather resistance for outdoor parts. 4 state a heat limit: 3 rate 100 °C and 1 states 96 °C. 3 state a print speed: Creality lists up to 350 mm/s, Polymaker lists 50 mm/s, and IEMAI lists 30 to 50 mm/s. 2 state a dimensional accuracy figure: Creality lists +/- 0.03 mm and IEMAI lists +/- 0.02 mm. 2 state a warranty term, and 3 state none.

Sunlight is the number that separates these spools: yxpolyer states over 2,000 hours of direct sunlight exposure without discoloration, and no other listing states an exposure figure. Enclosed printing comes up in 2 listings: Polymaker advises an enclosed printer for large parts, and IEMAI recommends printing inside an enclosed chamber with the cooling fan off or low.

How to pick the best asa filament for outdoor use

UV and weather resistance

Every listing here claims UV and weather resistance, but only yxpolyer states an exposure figure: over 2,000 hours of direct sunlight without discoloration. Polymaker describes its ASA as less prone to environmental stress cracking, and both Creality listings describe protection against UV radiation, aging and corrosion. For parts that sit in direct sun, the stated exposure figure is the number to weigh.

Heat limit

3 listings rate 100 °C: Polymaker and both Creality spools. yxpolyer states 96 °C for long-term outdoor use. IEMAI claims high heat resistance with no temperature stated, so its heat limit is not stated here.

Print speed and settings

Creality lists a speed of up to 350 mm/s, Polymaker lists 50 mm/s, and IEMAI lists 30 to 50 mm/s. Polymaker states a nozzle temperature of 250 °C and a bed temperature of 90 °C, and IEMAI states a nozzle range of 240 to 270 °C and a bed range of 70 to 95 °C. yxpolyer and the official Creality spool state no print settings, so check the printer defaults before the first print.

Dimensional accuracy

Only 2 listings state an accuracy figure: IEMAI lists +/- 0.02 mm and Creality lists +/- 0.03 mm. The other 3 state no accuracy figure, so parts that must fit together need a check print on those spools.

Enclosure and warping

Warping is the risk the listings warn about: Polymaker advises an enclosed printer for large parts to prevent warping, and IEMAI recommends an enclosed chamber with the cooling fan off or at a low setting, plus a bed adhesive when necessary. IEMAI also ships vacuum sealed with desiccant to protect against moisture and dust.

Project Match

  • Garden accessories, brackets and signs: IEMAI, with UV and weather resistance, +/- 0.02 mm accuracy and vacuum-sealed packaging.
  • Car accessories and RC planes: Polymaker, with UV resistance, a 100 °C heat limit and published print settings.
  • Fast outdoor prints on a Creality printer: Creality ASA, with a speed of up to 350 mm/s and a 1-year warranty.
  • Sunny spots that need a stated exposure figure: yxpolyer, with over 2,000 hours of direct sunlight without discoloration.
  • Simple black outdoor parts on a Creality printer: Creality official HP ASA, rated to 100 °C with no stated settings.

How the scores add up

Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None states a safety certification, so all score zero on safety, and 3 give no warranty term.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Creality ASA 350mm/s 9.7 32 21 21 n/a 3
YXPOLYER Olive Drab 9.7 30 21 21 n/a 3
IEMAI ASA Black 9.7 32 22 21 n/a 0
Polymaker ASA Black 9.7 32 21 21 n/a 0
Creality Official ASA 9.6 29 20 20 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.

FAQ: lasers and CNC

Why ASA for outdoor parts?

ASA resists UV and weather, per all 5 listings, and the listings describe it as stronger than PLA and ABS, with heat resistance to 100 °C on 3 spools. That combination suits parts that sit outside in sun and rain.

What nozzle and bed temperatures do these ASA filaments need?

Polymaker states a nozzle temperature of 250 °C and a bed temperature of 90 °C. IEMAI states a nozzle range of 240 to 270 °C and a bed range of 70 to 95 °C. The other 3 listings state no temperatures.

Do I need an enclosed printer for ASA?

Polymaker advises an enclosed printer for large parts to prevent warping, and IEMAI recommends printing inside an enclosed chamber with the cooling fan off or at a low setting. The other listings state no enclosure guidance.

How fast can these filaments print?

Creality lists a speed of up to 350 mm/s. Polymaker lists 50 mm/s, and IEMAI lists 30 to 50 mm/s. yxpolyer and the official Creality spool state no print speed.

Do any of these filaments state a warranty?

2 do: Creality lists 1 year, and yxpolyer lists 1 year. Polymaker, IEMAI and the official Creality spool state no warranty term, though Polymaker offers lifetime technical support.

Related: the best high quality 3d printer filament, the best abs cf filament, the best hygrometer for filament storage, the best double filament dryer box and our 3d printers hub.

More buying guides