Best Hygrometer for Filament Storage (2026)
Mini hygrometers for filament jars, from a ±2%RH 4-pack to a 6-pack with a 10-month battery, compared by humidity accuracy, range, refresh and battery life.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Humidity AccuracyWWHAKO Mini Hygrometer9.5/10View on Amazon - 2
Longest BatteryJEDEW 6-Pack Hygrometer9.5/10View on Amazon - 3
Best Embedded FitTeqyAqs Hygrometer9.4/10View on Amazon
Wet filament prints with pops, strings and weak layers, and a dry box only helps if the air inside stays dry. A small hygrometer in the jar shows the humidity at a glance, before a spool goes into the printer. This guide compares the best hygrometer for filament storage by humidity accuracy, temperature range, refresh speed and battery life.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Humidity Accuracy WWHAKO Mini Hygrometer: ±2%RH humidity accuracy with a -58 to 158 degree range and readings every 10 seconds. Check price on Amazon
- Longest Battery JEDEW 6-Pack Hygrometer: Each LR44 cell lasts up to 10 months, with a 6-pack for several filament jars. Check price on Amazon
- Best Embedded Fit TeqyAqs Hygrometer: 1.65 inch embedded opening with double-sided tape included, for jar lids and filament storage. Check price on Amazon
Machines on the list

WWHAKO 4-Pack Mini Hygrometer Thermometer Indoor
A 4-pack of mini hygrometers with ±2%RH humidity accuracy, a -58 to 158 degree temperature range, readings every 10 seconds and a Fahrenheit/Celsius switch.
Pros
- ±2%RH humidity accuracy, the best here
- Reads from -58 to 158 degrees
- Readings update every 10 seconds
- Stated for 3D printer automatic material jars
Cons
- No battery type or life stated
- No size for the embedded opening stated
- 4-pack, smaller than the 6-packs here
- Round shape needs an opening or tape to mount

JEDEW 6 Pack Hygrometer Thermometer Digital
A 6-pack of round hygrometers with ±3%RH humidity accuracy, a 32 to 158 degree range, readings every 10 seconds and up to 10 months per LR44 cell.
Pros
- Up to 10 months per LR44 cell
- 6-pack covers several jars
- 24 vents for updated readings
- Fahrenheit/Celsius switch
Cons
- ±3%RH humidity accuracy, behind the ±2%RH top pick
- 32 degree low end, the highest here
- No weight stated
- No warranty term stated

6 Pack Mini Hygrometer Indoor Humidity Meter
A 6-pack of mini hygrometers with ±5%RH humidity accuracy, a -58 to 158 degree range, readings every 10 seconds and up to 8 months per set of LR44 cells.
Pros
- 6-pack for several jars
- Reads from -58 to 158 degrees
- Readings update every 10 seconds
- 2 LR44 cells included
Cons
- ±5%RH humidity accuracy, the widest here
- ±2°F temperature accuracy
- No warranty term stated
- 1.11 in thick, the thickest here

4-Pack Mini Hygrometer Thermometer
A 4-pack of mini hygrometers with ±5%RH humidity accuracy, a -4 to 140 degree range, a 1.65 inch embedded opening and double-sided tape included.
Pros
- Stated for 3D printer automatic material jars
- 1.65 inch embedded opening stated
- Double-sided tape included
- Fahrenheit/Celsius switch by double click
Cons
- Humidity range starts at 20% RH, the highest here
- -4 to 140 degree range, the narrowest here
- ±5%RH humidity accuracy
- No warranty term stated

EWPJDK 6 Pack Mini Hygrometer Thermometer Indoor
A 6-pack of mini hygrometers with ±5%RH humidity accuracy, a -58 to 158 degree range and a 1.81 by 1.06 inch embedded opening.
Pros
- 6-pack for several jars
- Reads from -58 to 158 degrees
- 1.81 by 1.06 inch embedded opening stated
- Double-sided tape for mounting
Cons
- No battery type or life stated
- No refresh interval stated
- No Fahrenheit/Celsius switch stated
- ±5%RH humidity accuracy, the widest here
Other machines to compare
6 Pack Digital Hygrometer Meter for 3D Printer FilamentCheck price on Amazon
YOOPAI Mini Digital Hygrometer Thermometer 6 PackCheck price on Amazon
Govee Indoor Hygrometer Thermometer 3Pack H5075 withCheck price on Amazon
Govee Indoor Hygrometer Thermometer 2Pack H5075 withCheck price on Amazon
Specs compared
| Model | HQ Score | Humidity accuracy | Temp range | Humidity range | Refresh | Battery |
|---|---|---|---|---|---|---|
| WWHAKO Mini Hygrometer | 9.5/10 | ±2%RH | -58 to 158°F | 10% to 99% RH | Every 10 seconds | Not stated |
| JEDEW 6-Pack Hygrometer | 9.5/10 | ±3%RH | 32 to 158°F | 10% to 99% RH | Every 10 seconds | Up to 10 months |
| JJMTDS Mini Hygrometer | 9.5/10 | ±5%RH | -58 to 158°F | 10% to 99% RH | Every 10 seconds | Up to 8 months |
| TeqyAqs Hygrometer | 9.4/10 | ±5%RH | -4 to 140°F | 20% to 99% RH | Every 10 seconds | Up to 8 months |
| EWPJDK 6-Pack Hygrometer | 9.4/10 | ±5%RH | -58 to 158°F | 10% to 99% RH | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026.
How the scores work
Each meter is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| WWHAKO Mini Hygrometer | 9.5 | 33 | 21 | 20 | 0 | 0 |
| JEDEW 6-Pack Hygrometer | 9.5 | 30 | 21 | 21 | 0 | 0 |
| JJMTDS Mini Hygrometer | 9.5 | 29 | 20 | 21 | 0 | 0 |
| TeqyAqs Hygrometer | 9.4 | 28 | 20 | 19 | 0 | 0 |
| EWPJDK 6-Pack Hygrometer | 9.4 | 27 | 19 | 20 | 0 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
Most hygrometer listings are made for jars and tanks
5 hygrometer listings were compared. 2 name 3D printer filament jars among their uses, while all 5 name mason jars, reptile tanks or greenhouses. All 5 state a humidity accuracy, from ±2%RH to ±5%RH, and all 5 state a temperature range. None states a warranty term.
Buying guide: the best hygrometer for filament storage
Humidity accuracy
Humidity accuracy is the error around the true humidity, stated in percent RH. The picks here run from ±2%RH to ±5%RH: the WWHAKO reads within 2 points, the JEDEW within 3 points, while the JJMTDS, EWPJDK and TeqyAqs read within 5 points. For filament storage, a tighter reading shows a damp jar sooner, so pick the smallest error on the list.
Temperature range and refresh
Temperature range is the span the meter reads, and refresh is how often the reading updates. The WWHAKO, JJMTDS and EWPJDK read from -58 to 158 degrees, the JEDEW from 32 to 158 degrees, and the TeqyAqs from -4 to 140 degrees. All but the EWPJDK update every 10 seconds, so a change in the jar shows within seconds.
Battery and pack size
Battery life is how long one cell lasts, and pack size is how many meters come in the box. The JEDEW cell lasts up to 10 months, the JJMTDS and TeqyAqs cells up to 8 months, and the WWHAKO and EWPJDK state no battery life. The JEDEW, JJMTDS and EWPJDK come in 6-packs for several jars, while the WWHAKO and TeqyAqs come in 4-packs.
Mounting in a jar
Mounting is how the meter sits in the jar: embedded in an opening or fixed with tape. The EWPJDK opening is 1.81 by 1.06 inches, the TeqyAqs opening is about 1.65 inches, and both fix with double-sided tape. The WWHAKO opening size is printed as *** inch in the listing, so check the fit against the 1.79 inch meter before buying.
Project Match
- Filament jars: WWHAKO or TeqyAqs, both stated for 3D printer automatic material jars.
- Mason jars and small containers: JJMTDS or WWHAKO, both stated for mason jars.
- Reptile tanks and terrariums: JEDEW, JJMTDS or WWHAKO, all stated for reptile tanks.
- Greenhouses and gardens: JJMTDS or EWPJDK, both stated for greenhouses.
- Several jars at once: JEDEW, JJMTDS or EWPJDK, all 6-packs.
FAQ: lasers and CNC
How accurate should a hygrometer be for filament storage?
The picks here read humidity within 2 to 5 points of RH. The WWHAKO reads within 2 points, the JEDEW within 3 points, and the JJMTDS, EWPJDK and TeqyAqs within 5 points. A tighter reading shows a damp jar sooner.
How often should a filament hygrometer update?
The WWHAKO, JEDEW, JJMTDS and TeqyAqs update every 10 seconds. The EWPJDK states no refresh interval. An update every 10 seconds shows a change in the jar within seconds of opening it.
Can I mount a hygrometer inside a filament jar?
Yes, if the jar has an opening or a flat lid for tape. The EWPJDK opening is 1.81 by 1.06 inches, the TeqyAqs opening is about 1.65 inches, and both fix with double-sided tape. The WWHAKO opening size is printed as *** inch, so check the fit first.
How long does a hygrometer battery last?
The JEDEW cell lasts up to 10 months, and the JJMTDS and TeqyAqs cells last up to 8 months. The WWHAKO and EWPJDK state no battery life. Each JEDEW and TeqyAqs cell comes with one backup cell.
Do I need a hygrometer for every filament spool?
One meter per jar shows the air each spool sits in. The 6-packs cover several jars at once, while the 4-packs cover fewer. A meter that reads every 10 seconds shows a damp jar before the spool goes into the printer.
Related: the 3D printer filament types, the filament dryer vs dry box, the 3D printer maintenance, the 3D printers hub and the 3D printer accessories.




