Best 3D Printer for Gaming Miniatures (2026)
Four resins for printing tabletop gaming miniatures, compared by detail, toughness, flexibility and wash.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallELEGOO 8K Washable 2.09.6/10View on Amazon - 2
Best for Tabletop MiniaturesAmeraLabs TGM-79.6/10View on Amazon - 3
Best FlexibleHeyGears PAF109.5/10View on Amazon - 4
Best StandardMDJINZHAO Standard9.4/10View on Amazon
A gaming miniature is a small job with no room for error. A sword hilt, a cloak fold, a face the size of a grain of rice: every edge has to print clean, and the finished piece has to survive paint, handling and a night on the table. That is why the best 3d printer for gaming miniatures starts with the resin, not the machine. Four resins made the cut here, and they differ in detail, toughness, flexibility and wash, so the right one depends on what the miniature has to survive.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall ELEGOO 8K Washable 2.0: 8K detail with crisp edges, water-washable cleanup, low odor and a 2000g pack. Check price on Amazon
- Best for Tabletop Miniatures AmeraLabs TGM-7: Made for tabletop miniatures with high resolution, toughness and a paint-ready surface, in a 5kg pack. Check price on Amazon
- Best Flexible HeyGears PAF10: 46% elongation at break and 52 J/m impact strength for delicate parts that bend instead of snapping. Check price on Amazon
- Best Standard MDJINZHAO Standard: 405nm standard resin for RPG miniatures and wargaming models, with low odor and a 1000g pack. Check price on Amazon
Machines on the list

ELEGOO 8K Water-Washable 2.0 3D Printer Resin
An 8K water-washable resin in a 2000g pack, made for tabletop gaming miniatures with crisp edges, fine textures and low odor.
Pros
- 8K detail accuracy with crisp edges and fine textures for miniatures
- Water-washable: rinse with water, no alcohol baths
- Low odor and low viscosity for enclosed spaces
- Rated for MSLA, DLP and LCD printers at 385-405nm
Cons
- 2000g pack is less resin than the 5kg AmeraLabs
- No elongation figure stated
- No impact strength figure stated
- White Smoke is the only color in this listing

AmeraLabs TGM-7 3D Printer Resin for Tabletop
A tough resin made for tabletop miniatures, with high resolution, a hard paint-ready surface and a 5kg pack.
Pros
- Made for tabletop miniatures, a first choice for miniature printing businesses
- Tough with a bit of flex, so prints do not break in shipping, painting or gaming
- High resolution that shows slight expressions on miniatures
- Hard, non-sticky surface that is easy to paint
Cons
- 5kg pack is the largest and heaviest here
- No warranty term is stated
- No elongation figure stated
- Grey is the only color in this listing

HeyGears PAF10 3D Printer Resin, Volcanic Grey
A flexible, PVC-like resin in a 1000g pack, with 46% elongation at break and a matte finish for tabletop miniatures.
Pros
- 46% elongation at break, so parts bend instead of breaking
- 52 J/m notched impact strength for durable joints and edges
- 1.6% water sorption, so parts resist cracking and flaking in storage
- Matte finish with smoother surfaces and no visible layer lines
Cons
- 1000g pack, the joint smallest here
- No warranty term is stated
- No odor figure stated
- Volcanic Grey is the only color in this listing

MDJINZHAO Standard 3D Printer Resin, White 1000g
A standard 405nm resin in a 1000g pack for RPG miniatures, tabletop figures and wargaming models, with low odor.
Pros
- Compatible with most 405nm LCD and DLP printers
- Shortens printing time and improves printing efficiency
- Low odor for printing and post-processing
- Low viscosity for smooth flow and leveling, with fewer print failures
Cons
- 1000g pack, the joint smallest here
- No resolution figure stated
- No flexibility or impact figure stated
- White is the only color in this listing
Specs compared
| Model | HQ Score | Resin | Pack | Made for | Wash | Odor | Warranty |
|---|---|---|---|---|---|---|---|
| ELEGOO 8K Washable 2.0 | 9.6/10 | 8K water-washable | 2000g | Tabletop gaming miniatures | Water wash | Low odor | Not stated |
| AmeraLabs TGM-7 | 9.6/10 | TGM-7 | 5kg | Tabletop miniatures | Not stated | Low odor | Not stated |
| HeyGears PAF10 | 9.5/10 | PAF10 flexible | 1000g | Tabletop miniatures | Not stated | Not stated | Not stated |
| MDJINZHAO Standard | 9.4/10 | Standard | 1000g | RPG miniatures, tabletop figures | Not stated | Low odor | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (22 November 2026).
Best 3d printer for gaming miniatures: what the resin has to do
Detail comes first on a miniature. The ELEGOO 8K Water-Washable 2.0 is rated 8K with crisp edges and fine textures, and the AmeraLabs TGM-7 is built for high resolution miniatures, so both suit faces, armor trim and other fine work. The HeyGears PAF10 takes a different route: a matte finish with smoother surfaces and no visible layer lines, which suits display pieces that sit under a lamp.
Then comes survival. A miniature gets picked up, moved, dropped and packed away, so toughness matters as much as detail. The AmeraLabs TGM-7 pairs toughness with a bit of flex so prints do not break during shipping, painting and tabletop gaming sessions, and the HeyGears PAF10 bends with 46% elongation at break and 52 J/m notched impact strength. The ELEGOO resin adds warp resistance, while the MDJINZHAO Standard leans on proper hardness and good stability for everyday model making.
Buying guide: resin for gaming miniatures
Detail first
Look for the resolution the maker states. ELEGOO states 8K detail accuracy, and AmeraLabs states high resolution for 4K, 8K and 12K printers. The HeyGears PAF10 states a matte finish without visible layer lines, which reads as clean surfaces on a painted figure. The MDJINZHAO Standard states no resolution figure, so it suits general models rather than the finest faces.
Toughness for the table
Gaming pieces take knocks. The AmeraLabs TGM-7 is made for tabletop miniatures and states that prints will not break during shipping, painting and tabletop gaming sessions. The HeyGears PAF10 states 46% elongation at break and 52 J/m notched impact strength, so delicate accessories and thin structures bend instead of snapping. The ELEGOO resin states improved toughness and resistance to warping, and the MDJINZHAO Standard states proper hardness and good stability.
Wash, odor and the workspace
The ELEGOO resin rinses with water and needs no alcohol baths, which keeps cleanup simple in a home studio. The other three state no wash method. Low odor is stated for the ELEGOO, AmeraLabs and MDJINZHAO resins, and the ELEGOO low-viscosity formula also states even layer distribution with fewer trapped bubbles. The HeyGears PAF10 states no odor figure.
Pack size and color
Pack size sets how many miniatures a bottle covers. The AmeraLabs TGM-7 comes in a 5kg pack, the ELEGOO in a 2000g pack, and the HeyGears PAF10 and MDJINZHAO Standard in 1000g packs. Color is White Smoke for the ELEGOO, Grey for the AmeraLabs, Volcanic Grey for the HeyGears and White for the MDJINZHAO. The AmeraLabs states a hard, non-sticky surface that is easy to paint.
Wear nitrile gloves, work in a ventilated space, and keep uncured resin off skin and away from food surfaces.
Project Match
- Tabletop gaming miniatures: AmeraLabs TGM-7, ELEGOO 8K Water-Washable 2.0
- Display figures and collectibles: ELEGOO 8K Water-Washable 2.0, HeyGears PAF10
- Delicate accessories and thin structures: HeyGears PAF10
- RPG miniatures, tabletop figures and wargaming models: MDJINZHAO Standard
- Prototypes and everyday model making: MDJINZHAO Standard
How the scores add up
Each resin is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ELEGOO 8K Washable 2.0 | 9.6 | 32 | 21 | 20 | 5 | 0 |
| AmeraLabs TGM-7 | 9.6 | 32 | 21 | 20 | 4 | 0 |
| HeyGears PAF10 | 9.5 | 30 | 21 | 20 | 0 | 0 |
| MDJINZHAO Standard | 9.4 | 26 | 19 | 19 | 4 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
Which resin prints the finest detail for gaming miniatures?
The ELEGOO 8K Water-Washable 2.0 states 8K detail accuracy with crisp edges and fine textures, and the AmeraLabs TGM-7 states high resolution for 4K, 8K and 12K printers. Either suits faces and fine trim, and the HeyGears PAF10 adds a matte finish with no visible layer lines.
What makes a resin good for tabletop gaming?
Toughness with a little flex. The AmeraLabs TGM-7 states prints will not break during shipping, painting and tabletop gaming sessions, and the HeyGears PAF10 states 46% elongation at break with 52 J/m notched impact strength, so thin parts bend instead of snapping.
Can I paint resin miniatures?
Yes, if the surface is hard and paint-ready. The AmeraLabs TGM-7 states a hard, non-sticky surface that is easy to paint, and the ELEGOO 8K Water-Washable 2.0 states crisp edges and fine textures that hold paint detail.
How do I clean water-washable resin prints?
Rinse them with water. The ELEGOO 8K Water-Washable 2.0 states a water-washable formula with no alcohol baths, which keeps cleanup quick in a home studio. The other three state no wash method.
How much resin comes in each pack?
The AmeraLabs TGM-7 comes in a 5kg pack, the ELEGOO 8K Water-Washable 2.0 in a 2000g pack, and the HeyGears PAF10 and MDJINZHAO Standard in 1000g packs.
Related: best 3d printer for dnd minis, best 3d printer for warhammer, best UV resin for miniatures, best 3d scanner for miniatures and the 3d printers hub. Also see our acrylic vs enamel paint for miniatures.




