Best 3D Printer for TPE (2026): 4 Picks for Flexible Prints
Four flexible printing picks for TPE work, from soft 39D filament to a bed adhesive that holds TPU prints in place.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCC3D TPE 39D Natural9.5/10View on Amazon - 2
Best for BasketballsCC3D TPE 47D Red9.5/10View on Amazon - 3
Best Bed AdhesivePrevailent T-80 Glue9.5/10View on Amazon
Flexible parts start with the right material, not the machine badge. A soft phone grip, a gasket, a bumper or a toy wheel all need a filament that bends instead of snapping, and a bed that holds it while it prints. This guide to the best 3d printer for tpe gathers the four supplies for that job: two TPE filaments at different hardness, a flexible TPU spool, and a bed adhesive that keeps soft prints stuck down. No printer is among the four picks, so the guide covers the material and the bed, which are the two parts of a TPE print a buyer can change first.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall CC3D TPE 39D Natural: 39D TPE at 1.75mm in a 1KG spool, softer than 95A filament, with a 1 year manufacturer warranty. Check price on Amazon
- Best for Basketballs CC3D TPE 47D Red: 47D TPE with high resilience for airless basketballs, supports that peel off easily and a 1 year manufacturer warranty. Check price on Amazon
- Best Bed Adhesive Prevailent T-80 Glue: T-80 glue holds PLA, PETG, ABS and TPU on glass, PEI and tape, then releases prints cleanly. Check price on Amazon
Machines on the list

CC3D TPE Filament 39D Natural White 1.75mm 1KG
A 1.75mm TPE filament in a 1KG spool at Shore 39D, equal to Shore 89A and softer than 95A TPE filament, in Natural White.
Pros
- Shore 39D, equal to Shore 89A, for soft flexible parts
- Softer than 95A TPE filament, per the maker
- 1.75mm filament in a 1KG spool
- 1 year manufacturer warranty stated
Cons
- No safety certification stated
- Natural White only in this listing
- Spool measures 8.27 x 8.27 x 2.76 inches, so check the spool holder fit
- No bed adhesion help is included; pair it with a bed adhesive

CC3D TPE Filament 47D Red 1.75mm 1KG 3D Printer
A 1.75mm TPE filament in a 1KG spool at Shore 47D, made from high resilience TPE for airless basketballs, in Red.
Pros
- Shore 47D high resilience TPE for airless basketballs
- Good adhesion, with supports that peel off easily
- 1.75mm filament in a 1KG spool
- 1 year manufacturer warranty stated
Cons
- No safety certification stated
- Red only in this listing
- Firmer than the 39D filament here, so less soft for flexible parts
- Spool measures 8.27 x 8.27 x 2.76 inches, so check the spool holder fit

3D Printer Bed Adhesive Prevailent T-80-4 fl oz
A 4 fl oz (118ml) bed adhesive for PLA, PETG, ABS, TPU and more, that holds prints on glass, PEI and blue painter's tape and releases them cleanly.
Pros
- Holds PLA, PETG, ABS, TPU and more during printing
- Works on borosilicate glass, PEI and blue painter's tape
- Parts release easily once printing is complete
- Certified safe and non-toxic, from natural, renewable resources
Cons
- No warranty term is stated
- No stated use on bare metal surfaces
- Small 4 fl oz (118ml) bottle for a busy print schedule
- Needs wiping with water and a towel after use

ELEGOO TPU 3D Printer Filament 1.75mm Black 1KG
A 95A TPU that states it stretches up to 5 times its original size, with vacuum-sealed packaging and a recommendation to dry the filament before printing.
Pros
- Stretches up to 5 times its original size without breaking, as the listing states
- 95A hardness with stated impact resistance for parts built to withstand impacts, collisions and drops
- Dried before packaging and vacuum sealed to protect against moisture
- States dimensional accuracy and consistent, smooth feeding at 1.75mm
Cons
- No print speed stated
- No warranty term in the listing
- No matte finish stated
- The listing recommends drying the filament before printing, so it needs a dryer or dry storage
Specs compared
| Model | HQ Score | Type | Size | Shore hardness | Warranty |
|---|---|---|---|---|---|
| CC3D TPE 39D Natural | 9.5/10 | TPE filament | 1.75mm, 1KG | 39D (89A) | 1 year manufacturer |
| CC3D TPE 47D Red | 9.5/10 | TPE filament | 1.75mm, 1KG | 47D | 1 year manufacturer |
| Prevailent T-80 Glue | 9.5/10 | Bed adhesive | 4 fl oz (118ml) | Not stated | Not stated |
| ELEGOO TPU 95A Black | 9.4/10 | TPU filament | 1.75mm, 1KG (2.2lbs) | 95A | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (22 November 2026).
Why flexible prints fail without the right setup
Soft filament is forgiving in the hand and stubborn on the printer. It bends where a rigid filament pushes straight, so the first layer has to grip the bed and stay gripped while the print grows. When the first layer lifts, the print warps or breaks free, and the whole job is lost. That is why the picks here pair filament with bed adhesion: the material sets the feel of the part, and the adhesive sets whether the part survives the print.
Hardness decides the feel. The CC3D 39D filament is softer than 95A TPE filament, so it suits parts that must flex and spring back. The 47D filament is firmer and built for high resilience prints such as airless basketballs. The ELEGOO TPU sits at 95A, a firmer flexible feel for everyday parts. The Prevailent T-80 adhesive works across the filaments in this guide, holding PLA, PETG, ABS, TPU and more while the print runs, then letting parts release easily once printing is complete.
Buying guide: best 3d printer for tpe
Match hardness to the part
Start from the part, not the spool. Soft grips, seals and gaskets want the lowest hardness here, so the 39D filament at Shore 39D, equal to Shore 89A, is the natural first choice. Airless basketballs want bounce and toughness, which is what the 47D filament is made for. Everyday flexible parts that still need to hold their shape suit the 95A ELEGOO TPU. A firmer filament is easier to feed, while a softer filament gives a softer part, so pick the lowest hardness the part truly needs.
Hold the first layer down
Flexible prints lift more easily than rigid ones, so bed adhesion earns its place in this guide. The Prevailent T-80 adhesive works on borosilicate glass, PEI and blue painter’s tape, and the maker gives no stated use on bare metal surfaces. It applies with a twist-top applicator and a custom sponge brush, on a cold or warm bed, and wipes away with water and a towel after use. A small touch-up covers multiple prints with minimal product usage, per the maker.
Check the spool size and fit
All three filaments here are 1.75mm, and the two CC3D spools are 1KG each, while the ELEGOO spool is 1KG (2.2lbs). The CC3D spools measure 8.27 x 8.27 x 2.76 inches and weigh 2.2 pounds, so check the spool holder before ordering. The ELEGOO TPU is made to fit most FDM 3D printers. Color is fixed per listing: Natural White for the 39D, Red for the 47D, and Black for the ELEGOO TPU.
Warranty and safety notes
Both CC3D filaments state a 1 year manufacturer warranty, while the Prevailent T-80 adhesive and the ELEGOO TPU filament state no warranty term. On safety, the T-80 adhesive is listed as certified safe and non-toxic, and made from natural, renewable resources. The filament listings here state no safety certification, so there is nothing to score on safety for those three picks.
The Prevailent T-80 adhesive is listed as certified safe and non-toxic, and made from natural, renewable resources. The filament listings here state no safety certification. Keep filament and adhesive away from heat sources and out of reach of children, and follow the maker guidance on each package.
Project Match
Pair the project with the pick that fits it, using only what each maker states:
- Soft grips, gaskets and flexible parts: CC3D TPE 39D Natural, the softer 39D filament.
- Airless basketballs: CC3D TPE 47D Red, made for that print with high resilience.
- Prints that lift or warp on the bed: Prevailent T-80 Glue, for glass, PEI and blue painter’s tape.
- General flexible TPU parts on most FDM printers: ELEGOO TPU 95A Black.
Work area is not stated for any pick here, since these are filament and adhesive supplies rather than machines.
How the scores add up
Each pick is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CC3D TPE 39D Natural | 9.5 | 30 | 21 | 21 | 0 | 2 |
| CC3D TPE 47D Red | 9.5 | 29 | 21 | 20 | 0 | 2 |
| Prevailent T-80 Glue | 9.5 | 27 | 20 | 19 | 7 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
What does Shore hardness mean for TPE filament?
Shore hardness grades how firm a flexible filament feels. The CC3D 39D filament is equal to Shore 89A and softer than 95A TPE filament, while the 47D filament is firmer and built for high resilience prints such as airless basketballs. A lower number means a softer feel, and a higher number means a firmer print.
Can I print TPE on any FDM printer?
The ELEGOO TPU filament is made to fit most FDM 3D printers, and both CC3D filaments are FDM printing materials in 1.75mm. A printer that feeds flexible filament cleanly and a bed that holds the first layer matter more than the badge on the machine.
How do I keep a TPE print stuck to the bed?
Use a bed adhesive such as the Prevailent T-80, which holds PLA, PETG, ABS, TPU and more on borosilicate glass, PEI and blue painter’s tape, then releases parts easily once printing is complete. The maker gives no stated use on bare metal surfaces.
Which pick suits soft, flexible parts?
The CC3D TPE 39D Natural, at Shore 39D, equal to Shore 89A and softer than 95A filament. For firmer flexible parts, the 47D Red or the 95A ELEGOO TPU fit better.
Do these picks carry a warranty?
Both CC3D filaments state a 1 year manufacturer warranty. The Prevailent T-80 adhesive and the ELEGOO TPU filament state no warranty term.
Related: TPU vs TPE filament, best TPU filament for phone cases, best glue stick for 3D printer bed, best PLA filament for 3D printers and the 3D printers hub.




