Best Router Bits for Shapeoko (2026): 5 Bit Sets Compared

Specs compared

Specifications are manufacturer rated, as published on each listing and collected 22 October 2026.

Buying guide: best router bits for shapeoko

Shank size comes first

Three sets here use 1/4 in shanks, the standard for full-size routers: the Newdeli 35-piece set, the MNA set and the UTRUSTTO set. The UTRUSTTO listing states its bits are designed for CNC, hand-held and table-mounted routers. The shengbenhao burrs and the HomeSoGood kit use 1/8 in shanks for rotary tools and die grinders such as Dremel. A 1/8 in shank will not fit a 1/4 in collet, so match the shank to the collet you own before anything else. If you own both a Shapeoko and a rotary tool, one 1/4 in set for the CNC plus the shengbenhao burr set for detail work covers both machines. Our 1/8 vs 1/4 shank guide walks through the difference.

Carbide tipped or high speed steel

The Newdeli bits are tipped with YG8 tungsten carbide, the MNA bits are carbide, and the UTRUSTTO bits use C3 carbide blades with a heat-resistant teflon coating. The shengbenhao burrs and HomeSoGood bits are high speed steel, with the shengbenhao set adding a titanium coating. Carbide holds an edge longer in wood; HSS burrs suit fine detail work at lower cost. See carbide vs HSS router bits for the full comparison.

Flush trim bits for template work

Two of the five sets are flush trim sets with top bearings, made for trimming veneer, laminate and shelf edging flush, or for following a template to cut identical parts. The MNA set cuts to heights of 1/4 in, 5/16 in, 3/8 in and 1/2 in; the UTRUSTTO set covers 13/16 in, 1-1/16 in, 1-3/16 in and 1-7/32 in. If signs and templates are your main work, a dedicated flush trim set beats a big mixed box. Compare dedicated options in our flush trim bit for CNC roundup.

How many bits you need

The Newdeli set holds 35 bits covering straight, cove, flush trim, chamfer, round over, round nose, slot cutter, V-groove, ogee and dovetail profiles. That is the set for owners who cut signs, cabinets and furniture and want every profile on hand. If you only trim edges to templates, the 4-piece MNA or UTRUSTTO sets take less space and cover the job. The shengbenhao 20-piece burr set is a different animal: small rotary burrs for carving and engraving detail, not for cutting parts. A mixed box also lets you try a profile before committing to a premium single bit. Our CNC router bit types guide explains the profiles.

Straight bits and edge profiles

The Newdeli set is the only one here with a full profile library: straight bits for grooves and dados, round over and ogee bits for softened sign edges, chamfer and V-groove bits for lettering, plus dovetail and slot cutter bits for joinery. Six straight bits anchor the set, with 2 each of cove, round nose, roman ogee, double roman ogee and dovetail. If your Shapeoko cuts cabinet parts and boxes, those joinery profiles earn their drawer space. For one-off edge treatments, pull the single profile bit you need and leave the rest in the box.

Feeds, speeds and passes

The listings here do not publish feed rates, spindle speeds or depth-of-cut figures, so treat the first cut in a new material as a setup cut: a shallow pass, a moderate feed, and an ear on the machine. Hardwood, MDF and plywood all cut differently, and a dull bit burns instead of cutting. Our feeds and speeds for beginners guide explains the variables without inventing numbers for these bits.

Dust, noise and cleanup

Routing MDF and plywood makes fine dust that a shop vacuum or dust shoe should catch at the source. The listings do not state dust collection fittings, so plan your own hose routing. Hearing protection is worth wearing for long profile runs; see our hearing protection for CNC router picks.

Project Match

• Wooden signs with shaped edges: the Newdeli 35-piece set, with round over, roman ogee, chamfer and 90-degree V-groove profiles and 1/4 in shanks.
• Template-cut parts and shelf edging: the UTRUSTTO or MNA flush trim sets, both with top bearings and 1/4 in shanks.
• Small carved details and engraving accents: the shengbenhao 20-piece HSS burr set with 1/8 in shanks for rotary tools.
• First kit for drilling and light routing: the HomeSoGood 11-piece kit with cutting guide, drills and routing bits.
• Cabinets, boxes and drawers: the Newdeli set again, with dovetail, slot cutter and straight bits stated in the profile list.

How the scores add up

Each set is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

FAQ: lasers and CNC

What shank size fits my router?

Match the bit shank to your collet. The Newdeli, MNA and UTRUSTTO sets use 1/4 in shanks for full-size routers, and the UTRUSTTO listing states CNC compatibility. The shengbenhao and HomeSoGood sets use 1/8 in shanks for rotary tools and die grinders.

Carbide or HSS for a Shapeoko?

Carbide holds its edge longer in wood: the Newdeli, MNA and UTRUSTTO sets are carbide or carbide tipped. HSS suits fine detail and lower-cost burrs, like the shengbenhao 20-piece set. For production runs in hardwood, carbide is the usual pick.

Can I use these bits on metal?

The UTRUSTTO listing says its bits are not recommended for metal or non-wood materials. The other listings state wood, MDF, plywood, laminate and particle board. For metal cutting, see our end mill for aluminum picks instead.

Which set should a beginner buy?

The Newdeli listing calls its 35-piece set the first choice for beginners, and it covers the most profiles in one box. If you only need to trim edges flush, start with a 4-piece flush trim set instead. Beginners cutting their first signs will reach for the straight and V-groove bits most often.

Do I need a full set or single bits?

A full set pays off when you cut varied projects: signs one week, boxes the next. For one repeated job, such as trimming shelf edging, a dedicated 4-piece flush trim set is enough. Single specialty bits are covered in our best CNC router bits roundup.

Can I use these bits in a rotary tool?

Only the 1/8 in shank sets: the shengbenhao burrs state compatibility with rotary tools and die grinders, and the HomeSoGood kit is designed for Dremel tools. The 1/4 in shank sets will not fit a rotary tool collet.

Related: CNC router bit types, end mill vs router bit, best flush trim bit for CNC, 1/4 vs 1/2 shank router bits and the CNC tooling hub.