What Is Overlocker Sewing Machine? How It Works and When to Use One
An overlocker trims, stitches and finishes raw fabric edges in one pass, and this guide explains how it differs from a regular sewing machine.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Brother ST4031HD Serger9.5/10View on Amazon - 2
Juki MO-80CB Free-Arm Serger Overlock Machine9.7/10View on Amazon - 3
Brother Serger 1034D Heavy-Duty Metal Frame Overlock Machine9.6/10View on Amazon
What is overlocker sewing machine? An overlocker, also called a serger, trims the raw edge of fabric and wraps it in interlocking stitches in one pass, so seams stay neat and stretchy fabrics keep their give. A regular sewing machine joins fabric with a needle and bobbin, while an overlocker uses loopers and several threads to cut and finish the edge at the same time.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Every speed, width and weight in this guide comes from a maker listing named in the text. Where no listing states a figure, this guide explains the idea without a number.
What an overlocker does
An overlocker sews a seam and finishes its edge in one motion. Loopers carry thread around the fabric edge while a knife trims the raw edge just ahead of the needles, so the stitch wraps the cut edge and stops it fraying. The result is the clean, stretchy seam found inside most ready-made garments.
Most overlockers also sew rolled hems and decorative edges. The VEVOR serger (on Amazon) lists overlock, rolled hem, edging and lettuce hem among its stitch styles, which covers sheer fabric through heavy denim. A regular sewing machine can zigzag an edge to slow fraying, but it cannot trim and wrap the edge in one pass.
Overlocker vs sewing machine
The two machines do different jobs. A sewing machine builds the garment with straight seams, topstitching, buttonholes and zippers. An overlocker finishes the raw edges of those seams and sews stretchy knits without popping stitches when the fabric moves.
An overlocker has no bobbin. Thread comes from cones on stands and passes through loopers that interlock around the edge. That is why an overlocker uses more thread than a sewing machine. Color-coded threading paths, found on the Brother 1034D, the Brother ST4031HD (on Amazon), the VEVOR serger and the Janome MyLock 654D (on Amazon), make the order of the threads easier to follow.
An overlocker also cannot replace a sewing machine for construction. It has no straight stitch for topstitching and no buttonhole function, so garments still need a regular machine for those steps. The JUKI MO-80CB (on Amazon) adds a free arm for sleeves and other cylindrical pieces.
Thread counts: 2, 3, 4 or 5 threads
Thread count is the first choice when comparing overlockers. A 3-thread overlock finishes a raw edge. A 4-thread overlock adds another needle row, so it sews and finishes a seam in one pass. A 2-thread overlock makes a light edge finish, and a 5-thread overlock adds a chain stitch row beside the overlock for stronger seams.
The Brother 1034D (on Amazon) is a 3 or 4 thread serger, and the Brother ST4031HD is a 3-4 thread serger. The Janome 8002D converts between 2, 3 and 4 threads, and the Janome MyLock 554D and MyLock 654D each offer 2, 3 or 4 thread stitching. The VEVOR serger goes further with a 2-3-5 thread setup, and the Bernette B68 offers 2/3/4/5 thread overlock plus chain stitch and coverstitch in one machine.
More threads mean more setup and more thread to buy. A beginner who mainly finishes garment edges can start with a 3 or 4 thread machine such as the Brother 1034D, while a sewer who also wants coverstitch hems can look at a combo such as the Bernette B68. The thread pack bundled with the Brother 1034D holds 4 spools at 1750 yards per spool.
Speed and size: what the listings state
Overlockers sew fast. The Brother 1034D, the Brother ST4031HD, the Janome MyLock 454D and the Bernette B68 each reach 1,300 stitches per minute. The VEVOR serger reaches 1,250 stitches per minute with a 112W motor, and the Purptarol machine reaches 1200 stitches per minute with a 100W motor.
Size and weight vary. The JUKI MO-80CB weighs 14.0 pounds and the Janome MyLock 454D also weighs 14.0 pounds, while the Janome MyLock 554D weighs 14.3 pounds. The Brother ST4031HD weighs 17.64 pounds, the VEVOR serger weighs 17.97 pounds, the Janome MyLock 654D weighs 18.5 pounds and the Bernette B68 weighs 20.0 pounds. The Bernette B68 measures 15.0 inches on each side and lights the work area with 5 LED lights. The Brother ST4031HD measures 12.99 by 14.37 by 17.01 inches with a large extension table and 3 accessory feet.
Warranties differ too. JUKI states a 5 year limited warranty for the MO-80CB. Janome states a 25 year limited warranty on mechanical parts, 2 year limited warranty on electrical parts and 1 year limited labor for the MyLock 654D and the MyLock 454D. The Brother ST4031HD is intended for sale only in the US at 120 volts, and any other use or sale voids the warranty.
Differential feed and rolled hems
Differential feed moves the front and back feed dogs at different rates, so stretchy knits feed without waving and slippery fabrics feed without puckering. The Janome 8002D, the Janome MyLock 454D and the JUKI MO-80CB all list differential feed, and the Janome MyLock 454D states a differential feed ratio of 0.5mm to 2.25mm.
Cutting width sets how much fabric the knife trims. The Janome 8002D and the Janome MyLock 454D each state an adjustable cutting width from 3.1mm to 7.3mm, and the Janome MyLock 454D states a stitch length from 1mm to 4mm. The Bernette B68 states an adjustable stitch length of 1-4mm, and the Purptarol machine states a needle pitch from 2.5-3.2mm and a hemming width from 0.18 inch to 0.22 inch.
A rolled hem turns a narrow edge under and stitches it in one pass, which suits sheer fabrics and napkin edges. The Janome 8002D lists an easy rolled hem changeover, and the VEVOR serger lists rolled hem among its stitch styles. The Bernette B68 adds coverstitch, which sews a hem with two needle rows on top and a looper below, the finish seen on most T-shirt hems. See the coverstitch vs serger guide for the difference.
When to buy one, and when to wait
An overlocker earns its space when garments are a regular project. It finishes seams on dresses, T-shirts and activewear, sews knits without popped stitches, and turns out rolled hems faster than a regular machine.
Wait if sewing is occasional or mostly quilting and home decor. A regular machine with a zigzag stitch finishes occasional edges well enough, and an overlocker adds threading, cones of thread and another machine to store. Start with the serger machine for beginners guide to see the setup steps, and compare stitch options in the sewing machine stitch types guide.
Plan for thread as well as the machine. An overlocker runs through cones far faster than a sewing machine runs through a bobbin. A machine that arrives pre-threaded, such as the Janome MyLock 554D with 4 cones of white overlock thread included, shortens setup. A portable sewing machine with multiple stitches can cover construction while the overlocker handles finishing; see the best portable sewing machine guide.
What is overlocker sewing machine: the short version
- An overlocker trims and finishes raw fabric edges with interlocking stitches in one pass.
- It uses loopers and 2, 3, 4 or 5 threads instead of a bobbin.
- It sews stretchy knits and rolled hems faster than a regular machine.
- It does not replace a sewing machine for straight seams and buttonholes.
- Compare thread count, speed, differential feed and warranty before buying.
FAQ: lasers and CNC
Is an overlocker the same as a serger?
Yes. Serger is the common name in the US for the same machine.
Can an overlocker replace a sewing machine?
No. An overlocker finishes edges and sews stretchy seams, but it has no straight stitch for topstitching and no buttonhole function, so construction still needs a regular machine.
How many threads does an overlocker need?
The Brother 1034D uses 3 or 4 threads, the VEVOR serger uses 2, 3 or 5 threads, and the Bernette B68 uses 2, 3, 4 or 5 threads plus chain stitch and coverstitch.
How fast does an overlocker sew?
The Brother 1034D, the Brother ST4031HD, the Janome MyLock 454D and the Bernette B68 each reach 1,300 stitches per minute; the VEVOR serger reaches 1,250 and the Purptarol machine reaches 1200.
Do overlockers cut fabric while they sew?
Yes. A knife trims the raw edge just ahead of the needles. The Janome 8002D and the Janome MyLock 454D each state an adjustable cutting width from 3.1mm to 7.3mm.
What is differential feed?
Differential feed moves the front and back feed dogs at different rates to stop knits waving and slippery fabrics puckering. The Janome MyLock 454D states a differential feed ratio of 0.5mm to 2.25mm.
Related: the serger machine for beginners, coverstitch vs serger and sewing machine stitch types guides, plus the best portable sewing machine with multiple stitches and best thread for embroidery machine guides.




