Sewing Machine Stitch Types Explained
A guide to sewing machine stitch types, from straight and zigzag to overcast, blind hem and rolled hem, with the presser feet that sew each stitch.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
48pc Sewing Machine Presser Feet Accessories9.6/10View on Amazon - 2
SINGER® Garment Presser Feet Kit for Alterations9.6/10View on Amazon - 3
TISEKER 2 Pieces Zig Zag9.6/10View on Amazon - 4
2 Pcs Sewing Machine Foot9.5/10View on Amazon
A sewing machine stitch types guide starts with a simple truth: every seam, hem and decorative edge on a garment comes from a small set of stitches, and each stitch needs the right foot to sew cleanly. Straight stitch joins seams, zigzag finishes raw edges and sews stretch fabric, overcast stitch wraps an edge so it stops fraying, blind hem hides a hem on trousers and skirts, rolled hem turns a fine edge on light fabric, gathering stitch pulls fullness into a flounce, and satin stitch lays dense cover stitching for applique. This guide explains each stitch, what it is for, and which presser foot sews it, using the feet in the gear section below.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Stitch width and foot fit vary by machine. The figures in this guide come from the listings themselves, and the Kraftex, Yuomeaz and TISEKER listings state low-shank fit while the SINGER kit (on Amazon) is listed for most SINGER machines, so check the machine before ordering.

48pc Sewing Machine Presser Feet Accessories
A 48-piece low-shank presser foot set with overcast, zipper, blind hem, rolled hem, gathering, quilting, zigzag and satin stitch feet for Brother, Singer, Janome and Kenmore machines.
Pros
- 48 feet cover straight, zigzag, overcast, blind hem, rolled hem, gathering, quilting and satin stitches
- Metal and clear plastic feet built for cotton, denim, knits, satin, leather and delicate fabrics
- Low-shank design fits Brother, Singer, Janome and Kenmore machines, and feet change fast mid-project
- Cording, pintuck, piping, bead, fringe, darning, roller and applique feet add trims, gathers and decorative texture
Cons
- No warranty term in the listing
- No stitch-width figure is stated
- Low-shank fit only, so check the machine before ordering
- No storage case is stated in the listing

SINGER® Garment Presser Feet Kit for Alterations
A garment presser foot kit with a gathering foot, a rolled hem foot and a sew easy foot with an adjustable guide, made for most SINGER sewing machines.
Pros
- Gathering foot creates flounces and gathered seams with consistent results
- Rolled hem foot creates a neat 1/8-inch edge finish on light to medium weight fabrics
- Sew easy foot has an adjustable guide for straight seam allowances
- Made for most SINGER sewing machines, so fit is clear for SINGER owners
Cons
- Listing states no warranty
- Covers gathering, rolled hem and straight seams only, with no zigzag or overcast foot
- Rolled hem foot suits light to medium weight fabrics, not heavy fabric
- No stitch-width figure is stated

TISEKER 2 Pieces Zig Zag
A 2-piece general-purpose zigzag presser foot with a wide needle slot for stitches up to 7mm in width, made for low-shank domestic sewing machines.
Pros
- Wide needle slot allows stitches up to 7mm in width
- Handles zigzag and straight stitch, plus elastic insertion and basic mending
- Quick-clicking system changes feet without a screwdriver
- Fits low-shank machines across the brands the listing names, including Brother, Janome, Juki and Pfaff
Cons
- No warranty term in the listing
- General-purpose foot only, with no overcast, hem or gathering foot in the pack
- No dimensions are stated in the listing
- 2 identical feet, so the spare adds little for a sewist who wants variety

2 Pcs Sewing Machine Foot
A 2-piece snap-on zigzag and straight stitch presser foot in zinc alloy, made for low-shank sewing machines including Brother models.
Pros
- Zinc alloy build for frequent use
- Snap-on design changes feet in seconds
- Handles straight stitches and intricate patterns, from embroidery to quilting
- Universal low-shank fit, including Brother machines
Cons
- No warranty term in the listing
- No stitch-width figure is stated
- Covers zigzag and straight stitch only, with no hem, overcast or gathering foot
- Size is stated as 1.3 x 0.63 inches and no weight is stated
Sewing Machine Stitch Types: The Main Stitches
Straight stitch is the seam stitch. It joins fabric panels, topstitches edges and sews the long seams on garments and home sewing, and the sew easy foot in the SINGER kit keeps its seam allowances straight with an adjustable guide. The Yuomeaz and TISEKER feet sew straight stitch as their everyday stitch, and the Kraftex set includes a zig zag foot for the same seam work.
Zigzag stitch swings the needle side to side, which makes it the stitch for raw edges, stretch fabric and applique outlines. It also sews the seams on knits, where a straight stitch can break as the fabric stretches. The TISEKER foot (on Amazon) has a wide needle slot that allows stitches up to 7mm in width, and the Yuomeaz foot (on Amazon) is listed for both zigzag and straight stitch, with a snap-on design for quick foot changes.
Overcast stitch wraps thread around a raw edge so the edge stops fraying. It is the stitch for seam allowances on woven fabric that frays, and the overcast foot in the Kraftex set is made for it. A zigzag stitch can finish an edge in a pinch, but the overcast foot guides the edge so the wrap sits evenly.
Blind hem stitch hides the hem on trousers, skirts and curtains: the needle catches a thread of the folded hem and leaves almost no stitch showing on the outside. The blind hem presser foot in the Kraftex set is made for it, and it pairs with the rolled hem foot for fine edges.
Rolled hem stitch turns a narrow, fine edge on light fabric, the finish seen on scarves and delicate hems. The SINGER rolled hem foot creates a neat 1/8-inch edge finish on light to medium weight fabrics, and the Kraftex set includes a rolled hem foot too.
Gathering stitch pulls fullness into fabric for flounces, ruffles and gathered seams on clothing. The SINGER gathering foot is made for decorative flounces and gathered seams, and the Kraftex gathering foot handles the same work across cotton, denim, knits, satin, leather and delicate fabrics.
Satin stitch is dense zigzag stitching laid close together for applique, monograms and decorative edges. The satin stitch foot in the Kraftex set is made for it, and the set adds cording, pintuck, piping, bead, fringe, darning, roller and applique feet for trims, gathers, piecing and decorative texture on hems, seams and edges.
For context on the machines themselves, see types of sewing machine and sewing machine recommendations for beginners. For a machine that sews plenty of stitch patterns, see best portable sewing machine with multiple stitches.
Presser Feet for Sewing Machine Stitch Types
The feet below sew the stitches above: straight and zigzag feet handle seams and edge finishes, overcast and hem feet finish edges, and the gathering foot shapes flounces.
Common Mistakes to Avoid
- Ordering feet without checking low-shank fit: the Kraftex, Yuomeaz and TISEKER listings state low-shank fit, and the SINGER kit is listed for most SINGER machines, so confirm the machine before ordering.
- Using a straight-stitch foot for wide zigzag work: a straight-stitch foot has only a small needle hole, while the TISEKER foot allows stitches up to 7mm in width.
- Leaving raw edges unfinished: an overcast or zigzag finish stops fraying, and the Kraftex overcast foot (on Amazon) is made for it.
- Expecting a rolled hem foot to suit heavy fabric: the SINGER rolled hem foot is made for light to medium weight fabrics.
- Buying a spare foot when a full set is needed: a 2-piece foot covers straight and zigzag stitch, while the 48-piece Kraftex set covers the hem, gathering and decorative stitches too.
Sewing Machine Stitch Types: The Short Version
- Straight stitch joins seams; zigzag finishes edges and sews stretch fabric.
- Overcast stitch wraps raw edges so they stop fraying.
- Blind hem hides a hem; rolled hem turns a fine edge on light fabric.
- Gathering stitch pulls fullness into flounces and gathered seams.
- Satin stitch lays dense cover stitching for applique and decoration.
- Match the foot to the stitch: zigzag and straight feet for seams, overcast and hem feet for edges, and the gathering foot for fullness.
FAQ: lasers and CNC
What is the most common sewing machine stitch?
Straight stitch is the stitch used most for seams, topstitching and joining fabric panels. The Yuomeaz and TISEKER feet sew straight stitch, and the sew easy foot in the SINGER kit keeps its seam allowances straight with an adjustable guide.
Which stitch stops fabric from fraying?
Overcast stitch wraps a raw edge so it stops fraying, and zigzag stitch finishes an edge on stretch fabric too. The overcast foot in the Kraftex set is made for overcast stitch, and the TISEKER and Yuomeaz feet sew zigzag stitch.
What foot sews a rolled hem?
A rolled hem foot sews a rolled hem. The SINGER rolled hem foot creates a neat 1/8-inch edge finish on light to medium weight fabrics, and the Kraftex set includes a rolled hem foot too.
Can a zigzag foot sew straight stitch?
Yes. The Yuomeaz foot is listed as a zig zag and straight stitch foot, and the TISEKER foot sews zigzag and straight stitch with a wide needle slot that allows stitches up to 7mm in width.
Do presser feet fit every sewing machine?
No. The Kraftex, Yuomeaz and TISEKER feet state low-shank fit, and the SINGER kit is listed for most SINGER machines, so check the machine before ordering. The Kraftex set fits low-shank Brother, Singer, Janome and Kenmore machines, and the TISEKER foot fits low-shank machines across the brands the listing names.
Which foot gathers fabric?
A gathering foot gathers fabric. The SINGER gathering foot is made for flounces and gathered seams on clothing, and the Kraftex set includes a gathering foot for the same work.
Related: the sewing and embroidery machine hub, best sewing machine presser feet and types of sewing machine.




